yacy_search_server/defaults/yacy.init

###
### YaCy Init File
###
# These properties will be loaded upon installation.
# They are used only once for set-up.
# If you make changes to this file and want these to make any effect,
# you must delete the yacy.conf file in DATA/SETTINGS

# ----------------------------------------------------------------------------
# the HTTP service configurations

# port number where the server should bind to
# e.g. 8080
#      #eth0:8080
# 	   192.168.0.1:8080
port = 8080

# use UPnP [true/false]
upnp.enabled = 

#sometimes you may want yacy to bind to another port, than the one reachable from outside.
#then set bindPort to the port yacy should bind on, and port to the port, visible from outside
#to run yacy on port 8080, reachable from port 80, set bindPort=8080, port=80 and use
#iptables -t nat -A PREROUTING -p tcp -s 192.168.24.0/16 --dport 80 -j DNAT --to 192.168.24.1:8080
#(of course you need to customize the ips)
bindPort = 

# SSL support:
#
# For a German manual see http://yacy-websuche.de/wiki/index.php/De:Interface%C3%9CberHTTPS
#
# English speaking user read below:
#
# With this you can access your peer using https://localhost:8080
# 
# There are two possibilities to specify which certificate should
# be used by YaCy.
#
# 1) Create a new certificate:
#
#    *) For testing purposes, you can create a keystore with a self-signed certificate, 
#       using the following command:
#       C:\> keytool -keystore mySrvKeystore -genkey -keyalg RSA -alias mycert
#
#    *) Then configure the keyStoreXXXX properties accordingly, e.g.
#       keyStore = c:/yacy/DATA/SETTINGS/mySrvKeystore 
#       keyStorePassword = mypwd
#
# 2) Import an existing certificate:
# 
#    Alternatively you can import an existing certificate in pkcs12 format into
#    the keystore.
#    
#    This can be done by setting the pkcs12XXX properties accordingly, e.g.
#    pkcs12ImportFile = c:/temp/keystore.pkcs12
#    pkcs12ImportPwd = test
#
#    If the property keyStore is not specified, then a new keystore file 
#    DATA/SETTINGS/myPeerKeystore will be created.

keyStore =
keyStorePassword =
pkcs12ImportFile = 
pkcs12ImportPwd = 

# server tracking: maximum time a track entry is hold in the internal cache
# value is in milliseconds, default is one hour
server.maxTrackingTime = 3600000

# maximum number of tracks per host
server.maxTrackingCount = 1000

# maximum number of hosts that are tracked
server.maxTrackingHostCount = 100


# Network Definition
# There can be separate YaCy networks, and managed sub-groups of the general network.
# The essentials of the network definition are attached in separate property files.
# The property here can also be a url where the definition can be loaded.
# In case of privately managed networks, this configuration must be changed BEFORE it is released
# to the members of the separated network peers.
network.unit.definition = defaults/yacy.network.freeworld.unit
#network.unit.definition = defaults/yacy.network.intranet.unit
network.group.definition = defaults/yacy.network.group

# Update process properties
# The update server location is given in the network.unit.definition,
# but the settings for update processing and cycles are individual.
# the update process can be either 'manual' (no automatic lookup for new versions),
# 'guided' (automatic lookup, but user is asked before update is performed',
# or 'auto' (whenever an update is available, the update is loaded and installed)
update.process = manual
# the cycle value applies only if the process is automatic or guided. The value means hours.
# There is currently a fixed minimum number of hours of 24 hours for updates
update.cycle = 168
# a version number blacklist can restrict automatic or guided updates to a specific
# range of version numbers. The restriction is done with a blacklist (standard regexpr)
# It is recommended to set this list to low developer version numbers
update.blacklist = ...[123]
# a update can also restricted with a concept property, which can decide if an
# update is only valid if it either is a main release or any svn release including new development releases
# Valid keywords are 'main' and 'any'
update.concept = any
# the following values are set automatically:
# the lookup time when the last time a lookup to the network update server(s) where done 
update.time.lookup = 0
# the download time when the last time a release was downloaded
update.time.download = 0
# the deploy time when the last update was done; milliseconds since epoch
update.time.deploy = 0
# delete old downloaded files after this amount of days to free disk space
# the latest release is always kept
update.deleteOld = 30

# restart-option
# a peer can be re-started periodically
# restart.process can be either 'off' (no automatic restart) or 'time' (time- rule-based, see below)
restart.process = off
# the restart.cycle is the number of hours that must pass bevore a restart is done
restart.cycle = 20
# the restart.hour is a pattern that must match with the hour string (two-digit, 24h)
# when the restart should be performed
restart.hour = 03
# the following values are set automatically
restart.time = 0

# clusters within a network:
# every network can have an unlimited number of clusters. Clusters may be also completely
# sealed and have no connection to other peers. When a cluster does not use the
# p2p protocol and the bootstraping mechanism to contact other peers, we call them
# Robinson peers. They can appear in different 'visibilities':
# - privatepeer: no connection and no data exchange to any other peer
# - privatecluster: connections only to self-defined addresses (other peers in same mode)
# - publiccluster: like privatecluster, but visible and searcheable by public p2p nodes
# - publicpeer: a single peer without cluster connection, but visible for p2p nodes
# all public robinson peers should use a peer tag string to be searcheable if in the
# search request these tags appear
cluster.mode=publicpeer
cluster.peers.yacydomain=localpeer.yacy
cluster.peers.ipport=localhost:8080

# bootstrapLoadTimeout
# this is the time-out for loading of the seedlist files during bootstraping
# the time should not be too long, since loading of the seedlist is not parallelized
# and a not successful loading of a seed file may prevent a peer from becoming
# a (at least) junior status. If the time-out is too short, there is the danger
# that the peer stays in virgin mode
bootstrapLoadTimeout = 6000

# time-out of client control socket in milliseconds
# since this applies only to the client-proxy connection,
# it can be rather short
# milliseconds
clientTimeout = 10000

# maximal number of httpd sessions
# a client may open several connections at once, and the httpdMaxBusySessions value sets
# a limit on the number of concurrent connections
httpdMaxBusySessions = 100
httpdMaxBusySessions__pro = 200

# default root path for the file server
# may be overridden by the htdocs parameter
# users shall be encouraged to use the htdocs path for individual content,
# not this path defined here
htRootPath = htroot
htTemplatePath = htroot/env/templates

# the htroot path
# root path for the httpd file server
htDefaultPath=htroot

# individual htroot folder
# every user may publicize her/his own web pages
# these pages shall be placed in the path defined here
# the htdocs path shares its content with the htroot path
htDocsPath = DATA/HTDOCS

# alternative path for the repository path of the web server: the URL
# http://localhost:8080/repository
# points to DATA/HTDOCS/repository, but can be altered with this repository path
# hint: the repository path is the default path for intranet indexing. The easiest ways
# to do a indexing of the local storage system is to set a path here for the repository
# that points to the root path of the files that shall be indexed
repositoryPath=DATA/HTDOCS/repository

# the default files (typically index.html), if no file name is given
# The complete path to this file is created by combination with the rootPath
# you can set a list of defaults, separated by comma
# the first one is preferred
defaultFiles = ConfigBasic.html,index.html,index.htm,default.html,search.html,console.html,control.html,welcome.html,wiki.html,forum.html,blog.html,email.html,content.html,monitor.html,share.html,dir.html,readme.txt

# locale-options: YaCy supports localization.
# Web pages for special languages are located in the htLocalePath
# The htLocaleLang defines a list of language options as <dir>/<named-language>
# the <dir> must exist as sub-path to htLocalePath
# the htLocaleSelection selects from the given locales, value=one-of-<dir>
locale.source=locales
locale.work=DATA/LOCALE/locales
locale.translated_html=DATA/LOCALE/htroot
locale.lang=default/English,de/Deutsch,fr/Fran&ccedil;ais,nl/Nederlands,it/Italiano,es/Espa&ntilde;ol,pt/Portug&ecirc;s,fi/Suomi,se/Svenska,dk/Dansk,gr/E&lambda;&lambda;&eta;v&iota;&kappa;&alpha;,sk/Slovensky
locale.language=default

# virtual host for httpdFileServlet access
# for example http://<fileHost>/ shall access the file servlet and
# return the defaultFile at rootPath
# either way, http://<fileHost>/ denotes the same as http://localhost:<port>/
# for the preconfigured value 'localpeer', the URL is:
# http://localpeer/
fileHost = localpeer

# specify the path to the MIME matching file table
mimeConfig = httpd.mime

# a path to the file cache, used for the internal proxy and as crawl buffer
# This will be used if the server is addressed as a proxy
proxyCache = DATA/HTCACHE

# the maximum disc cache size for files in proxyCache in megabytes
proxyCacheSize = 100
proxyCacheSize__pro = 1024

# storage place for new releases
releases = DATA/RELEASE

# time limits for the crawler:
# these times (milliseconds) are the shortest times for an access of the crawler to the same domain
# the crawler may read files faster than that, but never from the same domain faster than these time intervals
# a delta of 500 milliseconds means that no more than two files are taken from the same server
# there is a hard-coded limit which prevents that the used time is shorter that these default times
# the time-limits are distinguished for local and global crawls: there is no limit for an intranet-crawl.
minimumLocalDelta = 0
minimumGlobalDelta = 500

# the following mime-types are the whitelist for indexing
#
# parseableMimeTypes.HTML: specifies mime-types that can be indexed with built-in html parser
# parseableMime: specifies mime-types that can be indexed but not on the fly
parseableMimeTypes.HTML=application/xhtml+xml,text/html,text/plain,text/sgml
parseableMimeTypes=
parseableMimeTypes__pro=application/atom+xml,application/bzip2,application/excel,application/gzip,application/java-archive,application/msexcel,application/mspowerpoint,application/msword,application/octet-stream,application/pdf,application/postscript,application/powerpoint,application/rdf+xml,application/rss+xml,application/rtf,application/tar,application/vcard,application/vnd.ms-excel,application/vnd.ms-powerpoint,application/vnd.oasis.opendocument.text,application/x-7z-compressed,application/x-bz2,application/x-bzip2,application/x-compress,application/x-compressed,application/x-excel,application/x-gzip,application/x-msexcel,application/x-redhat packet manager,application/x-redhat-package-manager,application/x-rpm,application/x-shockwave-flash,application/x-shockwave-flash2-preview,application/x-tar,application/x-vnd.oasis.opendocument.text,application/x-xml,application/x-zip,application/x-zip-compressed,application/xml,application/zip,text/postscript,text/rss,text/rtf,text/x-vcard,text/xml
parseableMimeTypes.CRAWLER=
parseableMimeTypes.CRAWLER__pro=application/atom+xml,application/bzip2,application/excel,application/gzip,application/java-archive,application/msexcel,application/mspowerpoint,application/msword,application/octet-stream,application/pdf,application/postscript,application/powerpoint,application/rdf+xml,application/rss+xml,application/rtf,application/tar,application/vcard,application/vnd.ms-excel,application/vnd.ms-powerpoint,application/vnd.oasis.opendocument.text,application/x-7z-compressed,application/x-bz2,application/x-bzip2,application/x-compress,application/x-compressed,application/x-excel,application/x-gzip,application/x-msexcel,application/x-redhat packet manager,application/x-redhat-package-manager,application/x-rpm,application/x-shockwave-flash,application/x-shockwave-flash2-preview,application/x-tar,application/x-vnd.oasis.opendocument.text,application/x-xml,application/x-zip,application/x-zip-compressed,application/xml,application/zip,text/postscript,text/rss,text/rtf,text/x-vcard,text/xml
parseableMimeTypes.PROXY=
parseableMimeTypes.PROXY__pro=application/atom+xml,application/bzip2,application/excel,application/gzip,application/java-archive,application/msexcel,application/mspowerpoint,application/msword,application/octet-stream,application/pdf,application/postscript,application/powerpoint,application/rdf+xml,application/rss+xml,application/rtf,application/tar,application/vcard,application/vnd.ms-excel,application/vnd.ms-powerpoint,application/vnd.oasis.opendocument.text,application/x-7z-compressed,application/x-bz2,application/x-bzip2,application/x-compress,application/x-compressed,application/x-excel,application/x-gzip,application/x-msexcel,application/x-redhat packet manager,application/x-redhat-package-manager,application/x-rpm,application/x-shockwave-flash,application/x-shockwave-flash2-preview,application/x-tar,application/x-vnd.oasis.opendocument.text,application/x-xml,application/x-zip,application/x-zip-compressed,application/xml,application/zip,text/postscript,text/rss,text/rtf,text/x-vcard,text/xml
parseableMimeTypes.ICAP=
parseableMimeTypes.ICAP__pro=application/atom+xml,application/bzip2,application/excel,application/gzip,application/java-archive,application/msexcel,application/mspowerpoint,application/msword,application/octet-stream,application/pdf,application/postscript,application/powerpoint,application/rdf+xml,application/rss+xml,application/rtf,application/tar,application/vcard,application/vnd.ms-excel,application/vnd.ms-powerpoint,application/vnd.oasis.opendocument.text,application/x-7z-compressed,application/x-bz2,application/x-bzip2,application/x-compress,application/x-compressed,application/x-excel,application/x-gzip,application/x-msexcel,application/x-redhat packet manager,application/x-redhat-package-manager,application/x-rpm,application/x-shockwave-flash,application/x-shockwave-flash2-preview,application/x-tar,application/x-vnd.oasis.opendocument.text,application/x-xml,application/x-zip,application/x-zip-compressed,application/xml,application/zip,text/postscript,text/rss,text/rtf,text/x-vcard,text/xml
parseableMimeTypes.URLREDIRECTOR=
parseableMimeTypes.URLREDIRECTOR__pro=application/atom+xml,application/bzip2,application/excel,application/gzip,application/java-archive,application/msexcel,application/mspowerpoint,application/msword,application/octet-stream,application/pdf,application/postscript,application/powerpoint,application/rdf+xml,application/rss+xml,application/rtf,application/tar,application/vcard,application/vnd.ms-excel,application/vnd.ms-powerpoint,application/vnd.oasis.opendocument.text,application/x-7z-compressed,application/x-bz2,application/x-bzip2,application/x-compress,application/x-compressed,application/x-excel,application/x-gzip,application/x-msexcel,application/x-redhat packet manager,application/x-redhat-package-manager,application/x-rpm,application/x-shockwave-flash,application/x-shockwave-flash2-preview,application/x-tar,application/x-vnd.oasis.opendocument.text,application/x-xml,application/x-zip,application/x-zip-compressed,application/xml,application/zip,text/postscript,text/rss,text/rtf,text/x-vcard,text/xml
parseableMimeTypes.IMAGE=image/gif,image/jpeg,image/png,image/tiff,image/vnd.wap.wbmp,image/x-icon,image/bmp

# media extension string
# a comma-separated list of extensions that denote media file formats
# this is important to recognize <a href> - tags as not-html reference
# These files will be excluded from indexing _(Please keep extensions in alphabetical order)_
mediaExt=7z,ace,aif,aiff,arj,asf,asx,avi,bin,bmp,bz2,css,db,dcm,deb,doc,dll,dmg,exe,gif,gz,hqx,ico,img,iso,jar,jpe,jpg,jpeg,lx,lxl,m4v,mpeg,mov,mp3,mpg,ogg,png,pdf,ppt,ps,ram,rar,rm,rpm,scr,sit,so,swf,sxc,sxd,sxi,sxw,tar,tbz,tgz,torrent,war,wav,wmv,xcf,xls,zip
parseableExt=html,htm,txt,php,shtml,asp,aspx,jsp

# Promotion Strings
# These strings appear in the Web Mask of the YACY search client
# Set these Strings to cusomize your peer and give any message to
# other peer users
promoteSearchPageGreeting = P2P Web Search
# if the following property is set to true, the network name is used as greeting
promoteSearchPageGreeting.useNetworkName = false
# the following attributes can be used to define a custom image and home page on the search page
promoteSearchPageGreeting.homepage = http://yacy.net
promoteSearchPageGreeting.largeImage = /env/grafics/YaCyLogo_120ppi.png
promoteSearchPageGreeting.smallImage = /env/grafics/YaCyLogo_60ppi.png

# the path to the PLASMA database of the web spider
dbPath=DATA/PLASMADB

# the path to the public reverse word index for text files (web pages)
# the primary path is relative to the data root, the secondary path is an absolute path
# when the secondary path should be equal to the primary, it must be declared empty
indexPrimaryPath=DATA/INDEX
indexSecondaryPath=

# the commons are words that appear in the index more than 64k times in references.
# Since indexes with such size cannot be handled efficiently, they are sorted in such a way that references with high ranking
# are stored back into the index, and references with bad ranking are sorted out. Such sorted-out references can be stored
# for later use (but there is no at this time). If the sorted-out references should be stored, the following property should be
# set to true. If set to false, they are abandoned (deleted), and previously stored commons are removed.
index.storeCommons=false

# the path to the LISTS files. Most lists are used to filter web content
listsPath=DATA/LISTS

# path to additional databases, like messages, blog data and bookmarks
workPath=DATA/WORK

# the path to the SKINS files.
skinPath=DATA/SKINS

# the yellow-list; URL's elements
# (the core of an URL; like 'yahoo' in 'de.yahoo.com')
# appearing in this list will not get a manipulated user agent string
proxyYellowList=yacy.yellow

# the black-list; URLs appearing in this list will not be loaded;
# instead always a 404 is returned
# all these files will be placed in the listsPath
BlackLists.class=de.anomic.kelondro.text.DefaultBlacklist
BlackLists.Shared=url.default.black
BlackLists.DefaultList=url.default.black

#these are not needed as default. they just keep the values from beeing deleted ...
proxy.BlackLists=url.default.black
crawler.BlackLists=url.default.black
dht.BlackLists=url.default.black
search.BlackLists=url.default.black
surftips.BlackLists=url.default.black
news.BlackLists=url.default.black

proxyCookieBlackList=cookie.default.black
proxyCookieWhiteList=cookie.default.black

# the blue-list; 
# no search result is locally presented that has any word of the bluelist
# in the search words, the URL or the URL's description
plasmaBlueList=yacy.blue

# this proxy may in turn again access another proxy
# if you wish to do that, specify it here
# if you want to switch on the proxy use, set remoteProxyUse=true
# remoteProxyNoProxy is a no-proxy pattern list for the remote proxy
remoteProxyUse=false
remoteProxyUse4Yacy=true
remoteProxyUse4SSL=true

remoteProxyHost=192.168.2.2
remoteProxyPort=4239
remoteProxyUser=
remoteProxyPwd=

remoteProxyNoProxy=192.*,10.*,127.*,localhost

# the proxy may filter the content of transferred web pages
# the bluelist removes specific keywords from web pages
proxyBlueList=yacy.blue

# security settigns
# we provide proxy and server security through a 2-stage security gate:
# 1st stage: firewall-like access control trough ip filter for clients
# 2nd stage: password settings for proxy, server and server administrators
# by default, these settings are weak to simplify set-up and testing
# every user/adiministrator shall be encouraged to change these settings
# your can change them also online during run-time on
# http://localhost:8080/

# proxyClient: client-ip's that may connect the proxy for proxy service
# if several ip's are allowed then they must be separated by a ','
# any ip may contain the wildcard-sign '*'
#proxyClient=192.168.0.4
proxyClient=localhost,127.0.0.1,192.168.*,10.*

# YaCyHop: allow public usage of proxy for yacy-protocol
# this enables usage of the internal http proxy for everyone,
# if the file path starts with /yacy/
# This is used to enable anonymization of yacy protocol requests
# Instead of asking a remote peer directly, a peer in between is asked
# to prevent that the asked peer knows which peer asks.
YaCyHop=true

# serverClient: client-ip's that may connect to the web server,
# thus are allowed to use the search service
# if you set this to another value, search requst from others
# are blocked, but you will also be blocked from using others
# search services.
serverClient=*

# use_proxyAccounts: set to true to restrict proxy-access to some identified users.
#use User_p.html to create some Users.
use_proxyAccounts=false

# serverAccount: a user:password - pair for web server access
# this is the access to the 'public' pages on the server
# should be always open, but you get the option here
# if set to a user:password, you get a conflict with the administration account
# future versions will check if the server is unprotected,
# because the p2p-index-sharing function will use the http server for
# data exchange.
# example
#serverAccount=admin:mysecretpassword
serverAccount=
serverAccountBase64MD5=

# adminAccount: a user:password - pair for administration of
# settings through the web interface
# should be set to a secret. By default it is without a password
# but you are encouraged to set it to another value on the page
# http://localhost:8080/ConfigBasic.html
#adminAccount=admin:mysecretpassword
adminAccount=
adminAccountBase64MD5=

# special access handling for users from localhost:
# access from localhost may be granted with administration authority
# if this flag is set. It is set to true by default to make usage of YaCy easy
# if you use YaCy on a headless server, you should set this to false
# or configure this on http://localhost:8080/ConfigBasic.html
# during the first 10 minutes of operation of YaCy;
# if the admin account password is still empty after 10 minutes a random
# password is generated an access is then ONLY from localhost, which will cause
# inaccessibility for installations on headless servers.
adminAccountForLocalhost=true

# if you are running a principal peer, you must update the following variables
# The upload method that should be used to upload the seed-list file to
# a public accessible webserver where it can be loaded by other peers.
#
# You can set the seedUploadMethod-Property to 
# - None
# - Ftp
# - File
# - Scp (only if you have installed the optional addon)
#
seedUploadMethod=none

# This is the most common method to upload the seed-list
#  
# This is an ftp account with all relevant information.
# The update is only made if there had been changes in between.
seedFTPServer=
seedFTPAccount=
seedFTPPassword=
seedFTPPath=

# alternatively to an FTP account, a peer can also become a principal peer
# if the seed-list can be generated as a file and that file is also accessible from
# the internet. In this case, omit any ftp settings and set this path here.
# if this path stays empty, an ftp account is considered
# however, you must always set a seedURL because it is used to check if the
# file is actually accessible from the internet
seedFilePath=

# Settings needed to upload the seed-list file via scp
#
# Please note that this upload method can only be used if you have installed
# this optional upload method.
seedScpServer=
seedScpServerPort=
seedScpAccount=
seedScpPassword=
seedScpPath=

# every peer should have a name. inded, we try to give every peer an unique ID,
# which is necessary for internal organization of the index sharing, but the
# peer's name is purely informal. No function but information is applied.
# please change this at your pleasure
peerName=anomic

# every peer periodically scans for other peers. you can set the time
# of the period here (minutes)
peerCycle=2

# Debug mode for YACY network: this will trigger that also local ip's are
# accepted as peer addresses
yacyDebugMode=false

#staticIP if you have a static IP, you can use this setting
staticIP=

# each time YaCy starts up, it can trigger the local browser to show the
# status page. This is active by default, to make it easier for first-time
# users to understand what this application does. You can disable browser
# pop-up here or set a different start page, like the search page
# the browser type is optional and works only under certain conditions
browserPopUpTrigger=true
browserPopUpPage=ConfigBasic.html
browserPopUpApplication=firefox

# defines if the YaCy icon appears in the system tray on supported platforms
trayIcon=true
tray.label=YaCy

# index sharing attributes: by default, sharing is on.
# If you want to use YaCy only for local indexing (robinson mode),
# you may switch this off
allowDistributeIndex=true
allowDistributeIndexWhileCrawling=false
allowDistributeIndexWhileIndexing=true
allowReceiveIndex=true
allowUnlimitedReceiveIndexFrom=
indexReceiveBlockBlacklist=true

# the frequency is the number of links per minute, that the peer allowes
# _every_ other peer to send to this peer
defaultWordReceiveFrequency=100
defaultLinkReceiveFrequency=30
# the default may be overridden for each peer individually, these
# settings are only available through the online interface

# prefetch parameters
# the prefetch depth assigns a specific depth to the prefetch mechanism
# prefetch of 0 means no prefetch; a prefetch of 1 means to prefetch all
# embedded URLs, but since embedded image links are loaded by the browser
# this means that only embedded anchors are prefetched additionally
# a prefetch of 2 would result in loading of all images and anchor pages
# of all embedded anchors. Be careful with this value, since even a prefetch
# of 2 would result in hundreds of prefetched URLs for each single proxy fill.
proxyPrefetchDepth=0
proxyStoreHTCache=true
proxyIndexingRemote=false
proxyIndexingLocalText=true
proxyIndexingLocalMedia=true

# From the 'IndexCreate' menu point you can also define a crawling start point.
# The crawling works the same way as the prefetch, but it is possible to
# assign a different crawling depth.
# Be careful with this number. Consider a branching factor of average 20;
# A prefetch-depth of 8 would index 25.600.000.000 pages, maybe the whole WWW.
crawlingDepth=3
crawlingIfOlder=-1
crawlingDomFilterDepth=-1
crawlingDomMaxPages=-1
indexText=true
indexMedia=true

# Filter for crawlinig; may be used to restrict a crawl to a specific domain
# URLs are only indexed and further crawled if they match this filter
crawlingFilter=.*
crawlingQ=false
storeHTCache=false
storeTXCache=true

# peers may initiate remote crawling tasks.
# every peer may allow or disallow to be used as crawling-peer;
# you can also set a maximum crawl depth that can be requested or accepted
# order=parameters for requester; response=parameters for responder
# these values apply only for senior-senior - communication
# The delay value is number of seconds bewteen two separate orders
crawlOrder=true
crawlOrderDepth=0
crawlOrderDelay=8
crawlResponse=true
crawlResponseDepth=0

# indexing-exclusion - rules
# There rules are important to reduce the number of words that are indexed
# We distinguish three different sets of stop-words:
# static   - excludes all words given in the file yacy.stopwords from indexing,
# dynamic  - excludes all words from indexing which are listed by statistic rules,
# parental - excludes all words from indexing which had been indexed in the parent web page.
xsstopw=true
xdstopw=true
xpstopw=true

# Topwords filtering
# If set to true, all stopwords (stopwords.yacy) are filtered from the topwords
# Change to false if requesting hits from peers with modified stopwords-file and using the unchanged client-version
filterOutStopwordsFromTopwords=true

# performance-settings
# delay-times for permanent loops (milliseconds)
# the idlesleep is the pause that an proces sleeps if the last call to the
# process job was without execution of anything;
# the busysleep is the pause after a full job execution
# the prereq-value is a memory pre-requisite: that much bytes must
# be available/free in the heap; othervise the loop is not executed
# and another idlesleep is performed
20_dhtdistribution_idlesleep=30000
20_dhtdistribution_busysleep=10000
20_dhtdistribution_memprereq=6291456
30_peerping_idlesleep=120000
30_peerping_busysleep=120000
30_peerping_memprereq=1048576
40_peerseedcycle_idlesleep=1800000
40_peerseedcycle_busysleep=1200000
40_peerseedcycle_memprereq=2097152
50_localcrawl_idlesleep=2000
50_localcrawl_busysleep=50
50_localcrawl_memprereq=4194304
50_localcrawl_isPaused=false
60_remotecrawlloader_idlesleep=60000
60_remotecrawlloader_busysleep=30000
60_remotecrawlloader_memprereq=2097152
60_remotecrawlloader_isPaused=false
62_remotetriggeredcrawl_idlesleep=30000
62_remotetriggeredcrawl_busysleep=10000
62_remotetriggeredcrawl_memprereq=6291456
62_remotetriggeredcrawl_isPaused=false
80_indexing_idlesleep=1000
80_indexing_busysleep=10
80_indexing_memprereq=6291456
85_cacheflush_idlesleep=60000
85_cacheflush_busysleep=10000
85_cacheflush_memprereq=0
90_cleanup_idlesleep=300000
90_cleanup_busysleep=300000
90_cleanup_memprereq=0

# additional attributes:
# performanceIO is a percent-value. a value of 10 means, that 10% of the busysleep time
# is used to flush the RAM cache, which is the major part of the IO in YaCy
performanceProfile=defaults/yacy.init
performanceSpeed=100
performanceIO=10

# cleanup-process:
# properties for tasks that are performed during cleanup
cleanup.deletionProcessedNews = true
cleanup.deletionPublishedNews = true

# default memory settings for startup of yacy
# is valid in unix/shell and windows environments but
# not for first startup of YaCy

# -Xmx<size> and -Xms<size> maximum/init Java heap size
# both values should be equal,
# othervise the YaCy-internal memory supervision does not work
javastart_Xmx=Xmx120m
javastart_Xms=Xms120m

# priority of the yacy-process
# is valid in unix/shell and windows environments but
# not for first startup of YaCy
# UNIX: corresponds to the nice-level
# WIN: -20=realtime;-15=high;-10=above;0=normal;10=below;20=low
javastart_priority=10

# performance properties for the word index cache
# wordCacheMaxLow/High is the number of word indexes that shall be held in the
# ram cache during indexing. When YaCy is shut down, this cache must be
# flushed to disc; this may last some minutes.
wordCacheMaxCount = 30000
wordCacheMaxCount__pro = 100000

# Specifies if yacy can be used as transparent http proxy.
# 
# Please note that you also have to reconfigure your firewall
# before you can use yacy as transparent proxy. On linux this
# can be done like this:
#   iptables -t nat -A PREROUTING -p tcp -s 192.168.0.0/16 \
#   --dport 80 -j DNAT --to 192.168.0.1:8080
#
# With this iptables filter listed above all http traffic that
# comes from your private network (in this case 192.168.0.0)
# and goes to any webserver listening on port 80 will be forwarded
# by the firewall to yacy running on port 8080 (192.168.0.1:8080)
isTransparentProxy=false

# Specifies if yacy should use the http connection keep-alive feature
connectionKeepAliveSupport=true

# Specifies the timeout the proxy sould use
proxy.clientTimeout = 30000

# Specifies if the proxy should send the via header according to RFC
proxy.sendViaHeader=true

# Specifies if the proxy should send the X-Forwarded-For header
proxy.sendXForwardedForHeader=true

# Enable cookie monitoring
proxy.monitorCookies=false

# msgForwarding: Specifies if yacy should forward received messages via
# email to the configured email address
msgForwardingEnabled=false
msgForwardingCmd=/usr/sbin/sendmail
msgForwardingTo=root@localhost

#crawlPause: delay time after specific functions before crawling is resumed
crawlPause.proxy=15000
crawlPause.localsearch=9000
crawlPause.remotesearch=3000

# Some configuration values for the crawler
crawler.clientTimeout=9000

# http crawler specific settings; size in bytes
crawler.http.acceptEncoding=gzip
crawler.http.acceptLanguage=en-us,en;q=0.5
crawler.http.acceptCharset=ISO-8859-1,utf-8;q=0.7,*;q=0.7
crawler.http.maxFileSize=262144
crawler.http.maxFileSize__pro=262144

# ftp crawler specific settings; size in bytes
crawler.ftp.maxFileSize=262144
crawler.ftp.maxFileSize__pro=262144

# maximum number of crawler threads
crawler.MaxActiveThreads = 30

# maximum size of indexing queue
indexer.slots = 40
indexer.slots__pro = 80

# maximum size of stacker queue
stacker.slots = 2000

# specifies if yacy should set it's own referer if no referer URL
# was set by the client.
useYacyReferer = true
useYacyReferer__pro = false

# allow only 443(https-port) for https-proxy?
# if you want to tunnel other protocols, set to false
secureHttps = true

# specifies if the httpdFileHandler should cache 
# the template-files from the htroot directory
enableTemplateCache = true

# specifies if the http post body should be transfered
# using content-encoding gzip during index transfer
# a) indexDistribution: which is done periodically if you have enabled 
#    Index Distribution via IndexControl_p.html
# b) indexTransfer: which can be used to transfer the whole index of a peer
#    this can be started via IndexTransfer_p.html
# c) indexControl: which can be triggered manually via IndexControl_p.html to
#    transfer a chosen subset of the peer index     
indexDistribution.gzipBody = true
indexTransfer.gzipBody = true
indexControl.gzipBody = true

# defining timeouts for index- transfer/distribution/control
indexControl.timeout = 60000
indexDistribution.timeout = 60000
indexTransfer.timeout = 120000

# defining max. allowed amount of open files during index- transfer/distribution
indexDistribution.maxOpenFiles = 800
indexTransfer.maxOpenFiles = 800

# sizes for index distribution
indexDistribution.minChunkSize = 10
indexDistribution.maxChunkSize = 1000
indexDistribution.startChunkSize = 200
indexDistribution.maxChunkFails = 1

# Distribution of Citation-Reference (CR-) files
# The distribution is done in two steps:
# first step to anonymize the records
# second step to forward to a collecting peer
# to anonymize the data even against the intermediate peer
# a specific precentage is also sent again to other peers.
# for key-numbers please see de.anomic.plasma.plasmaRankingDistribution
CRDistOn       = true
CRDist0Path    = GLOBAL/010_owncr
CRDist0Method  = 1
CRDist0Percent = 0
CRDist0Target  = 
CRDist1Path    = GLOBAL/014_othercr
CRDist1Method  = 9
CRDist1Percent = 30
CRDist1Target  = kaskelix.de:8080,yacy.dyndns.org:8000

# Search sequence settings
# collection:
# time = time to get a RWI out of RAM cache, assortments and WORDS files
# count = maximum number of RWI-entries that shall be collected
#
# join:
# time = time to perform the join between all collected RWIs
# count = maximum number of entries that shall be joined
#
# presort:
# time = time to do a sort of the joined URL-records
# count = maximum number of entries that shall be pre-sorted
#
# urlfetch:
# time = time to fetch the real URLs from the LURL database
# count = maximum number of urls that shall be fetched
#
# postsort:
# time = time for final sort of URLs
# count = maximum number oof URLs that shall be retrieved during sort
#
# filter:
# time = time to filter out unwanted urls (like redundant urls)
# count = maximum number of urls that shall be filtered
#
# snippetfetch:
# time = time to fetch snippets for selected URLs
# count = maximum number of snipptes to be fetched
#
# all values are percent
# time-percent is the percent of total search time
# count-percent is the percent of total wanted urls in result
# we distinguish local and remote search times
searchProcessLocalTime_c = 44
searchProcessLocalCount_c = 10000000
searchProcessLocalTime_j = 8
searchProcessLocalCount_j = 1000000
searchProcessLocalTime_r = 8
searchProcessLocalCount_r =100000
searchProcessLocalTime_u = 20
searchProcessLocalCount_u = 10000
searchProcessLocalTime_o = 10
searchProcessLocalCount_o = 100
searchProcessLocalTime_f = 5
searchProcessLocalCount_f = 100
searchProcessLocalTime_s = 5
searchProcessLocalCount_s = 30

searchProcessRemoteTime_c = 44
searchProcessRemoteCount_c = 1000000
searchProcessRemoteTime_j = 8
searchProcessRemoteCount_j = 1000000
searchProcessRemoteTime_r = 8 
searchProcessRemoteCount_r = 1000
searchProcessRemoteTime_u = 20
searchProcessRemoteCount_u = 1000
searchProcessRemoteTime_o = 10
searchProcessRemoteCount_o = 1000
searchProcessRemoteTime_f = 5
searchProcessRemoteCount_f = 100
searchProcessRemoteTime_s = 5
searchProcessRemoteCount_s = 10

# timeouts for snippet fetching in ms
# timeout_text is for text-snippets, timeout_media for media, e.g. images
timeout_text = 10000
timeout_media = 15000

# path to ranking directory containing ranking reference files
rankingPath = DATA/RANKING

# a list of domain name patterns that should not be cached by the httpc dns cache
httpc.nameCacheNoCachingPatterns = .*.ath.cx,.*.blogdns.*,.*.boldlygoingnowhere.org,.*.dnsalias.*,.*.dnsdojo.*,.*.dvrdns.org,.*.dyn-o-saur.com,.*.dynalias.*,.*.dyndns.*,.*.ftpaccess.cc,.*.game-host.org,.*.game-server.cc,.*.getmyip.com,.*.gotdns.*,.*.ham-radio-op.net,.*.hobby-site.com,.*.homedns.org,.*.homeftp.*,.*.homeip.net,.*.homelinux.*,.*.homeunix.*,.*.is-a-chef.*,.*.is-a-geek.*,.*.kicks-ass.*,.*.merseine.nu,.*.mine.nu,.*.myphotos.cc,.*.podzone.*,.*.scrapping.cc,.*.selfip.*,.*.servebbs.*,.*.serveftp.*,.*.servegame.org,.*.shacknet.nu

#externalRedirectors
#squid Redirector compatible
externalRedirector=

svnRevision=0

currentSkin=default

# flag to show if pages shall be usable for non-admin users
# this can be applied to the Surftips.html and yacysearch.html page
publicSurftips = true
publicSearchpage = true

# Wiki access rights
# the built-in wiki system allows by default only that the administrator is allowed to make changes
# this can be changed. There are three options:
# admin - only the admin has write right
# all   - everybody has write right
# user  - the admin and every user registered in the user db has write right
WikiAccess = admin

# Search Profiles
# we will support different search profiles
# this is currently only a single default profile
# If this profile setting is empty, a hard-coded profile from plasmaSearchRanking is used
rankingProfile =

#optional extern thumbnail program.
#the program must accept the invocation PROGRAM http://url /path/to/filename
thumbnailProgram = 

# settings for the peer's local robots.txt
# the following restrictions are possible (comma-separated):
# - all       : entire domain is disallowed
# - blog      : the blog-pages
# - bookmarks : the bookmark-page
# - dirs      : all directories in htroot (standard setting, as there is no usable information in)
# - fileshare : all files in the peer's file share (DATA/HTDOCS/share)
# - homepage  : all files on the peer's home page (DATA/HTDOCS/www)
# - locked    : all servlets ending on '_p.*' (standard setting, as robots would need a password to access them anyways)
# - news      : the news-page
# - network   : the network-pages
# - status    : peer's status page
# - surftips  : the surftips-page
# - wiki      : the wiki-page
httpd.robots.txt = locked,dirs

# class to use for parsing wikicode
wikiParser.class = de.anomic.data.wikiCode

# settings for automatic deletion of old entries in passive and potential seed-db
# time means max time (in days) a peer may not have been seen before it is deleted
routing.deleteOldSeeds.permission = true
routing.deleteOldSeeds.permission__pro = true
routing.deleteOldSeeds.time = 7
routing.deleteOldSeeds.time__pro = 30

# autoReCrawl Options
autoReCrawl_idlesleep = 3600000
autoReCrawl_busysleep = 3600000
autoReCrawl_memprereq = -1

# options to remember the default search engines when using the search compare features
compare_yacy.left = YaCy
compare_yacy.right = YaCy

# minimum free disk space for crawling (MiB)
disk.free = 3000

# setting if execution of CGI files is allowed or not
cgi.allow = false
cgi.suffixes = cgi,pl

# whether this is a version for a web browser
browserintegration = false

# next index data structure
useCell = false