*) will try other ports if YaCy standard ports are not available
*) distinguish between internal and external port (not sure if this
works 100%)
Still to add: propery in config to enter own external port (in case of
manually configured NAT)
removed preferred IPv4 in start options and added a new field IP6 in
peer seeds which will contain one or more IPv6 addresses. Now every peer
has one or more IP addresses assigned, even several IPv6 addresses are
possible. The peer-ping process must check all given and possible IP
addresses for a backping and return the one IP which was successful when
pinging the peer. The ping-ing peer must be able to recognize which of
the given IPs are available for outside access of the peer and store
this accordingly. If only one IPv6 address is available and no IPv4,
then the IPv6 is stored in the old IP field of the seed DNA.
Many methods in Seed.java are now marked as @deprecated because they had
been used for a single IP only. There is still a large construction site
left in YaCy now where all these deprecated methods must be replaced
with new method calls. The 'extra'-IPs, used by cluster assignment had
been removed since that can be replaced with IPv6 usage in p2p clusters.
All clusters must now use IPv6 if they want an intranet-routing.
hour. The table can be shown with
http://localhost:8090/Tables_p.html?table=stats
The entries have the following meaning:
aM: activeLastMonth
aW: activeLastWeek
aD: activeLastDay
aH: activeLastHour
cC: countConnected (Active Senior)
cD: countDisconnected (Passive Senior)
cP: countPotential (Junior)
cR: count of the RWI entries
cI: size of the index (number of documents)
The entry keys are abbreviated to reduce the space in the table as the
name is written again for every row.
This is the beginning of a 'yacystats' micro-alternative als built-in
function in YaCy. Graphics may follow after some time if enough test
data is available.
- default mySeed.ip to hostip in SeedDB.initMySeed() if Intranetmode
this allows to become senior status in intranet hosted search network with view peers,
otherwise peer would stay junior because of default init with loopback ip as public (dna) ip.
'cloud' was a bad idea. Changed also the accumulation process for peer
targets so that every dht chunk is not assigned the set of redundant
targets but they are assigned to redundant targets individually. This
enhances the granularity of the target accumulation and should enhance
the efficiency of the process. Finally the dht protocol client was
enriched with the ability to remove the 'accept remote index' flag from
peers or remove peers completely if they do not answer at all.
was optional and another alternative metadata store was available. Since
that store is now removed, Solr is always available (internally or
externally)
in peer hash hashing. This should not change anything if java casts long
to int by masking with 0xFFFFFFFFL but you never know. The important
thing is, that the hashCode() should not return numbers that have the
same order as the hash code order because hashing of seeds is used to
remove the order in some places.
- removed the default version blacklist regex from init (for future versions)
!!! left existing update blacklist setting untouched !!!
(existing installation wanting autoupdate for 1.71 need to change blacklist in ConfigUpdate_p.html)
- moved old blacklist patch to migration.java
- refactored all code which uses URIMetadataRow as standard for word
hash length and word hash ordering and moved that to the class 'Word',
becuase the class URIMetadataRow defined the old metadata data structure
and should be superfluous in the future
- removed unused methods from URIMetadataRow as preparation for further
removal of that class
- since specific heuristic Twitter & Blekko is not longer available or redundant with OpenSearchHeuristic,
adjusted ConfigHeuristic to use OpensearchHeuristic settings only.
For this the default OSD search target list is made available (copied) by default and the other configs are removed.
- the return of QueryGoal.getOriginalQueryString includes the queryModifier, which are held separately in a modifier object,
but in most (all) cases just the query term is expected, clarified and renamed it to QueryGoal.getQueryString which returns
just the search term (if needed a .getOrigianlQueryString could be implemented in Queryparameters, adding the modifiers)
- started to adjust internal html href references from absolute to relative (currently it is mixed).
For future development we should prefer relative href targets (less trouble with context aware servlets)
request into a separate thread and ignores the furthure result of a
request if that does not answer within the requested time-out. This is a
try to solve a problem with the peer-ping, which hangs whenever a peer
appears to be dead or blocked.
As the solr servlet may not be available (e.g. no public search page, old version, individual access setting) a /solr/select error is
remembered in the seed.dna of the remote peer.
This is not permanent, as flag is not stored and the seed is reloaded on several occasions, it is just a memory of the recent past status.
Might also be set to "not available" on time-out of last try.
- all non-dht targets (previously separated into 'robinson' for dht-like
queries and 'node' for solr queries) are non 'extra' peers, which are
queries using solr
- these extra-peers are now selected using a ranking on last-seen,
peer-tag-matches, node-peer flags, peer age, and link count. The ranking
is done using a weight and a random factor.
- the number of extra peers is 50% of the dht peers
- the dht peers now exclude too young peers to prevent bad results
during strong growth of the network
- the number of dht peers (and therefore extra-peers) is reduced when
the memory of the peer is low and/or some documents still appear in the
indexing-queue. This shall prevent a peer from deadlocks when p2p
queries are made in a fast sequence on weak hardware.
- the admin user name can be configured, in apiExec calls the default "admin" username is used.
TODO: the bin/apicall.sh script should likely take that into account.
- added default filename filter to select field (as only addition to *.black list is permanent)
- modified Blacklist_p header/legend to show all active blacklists
(to support understanding that all configured lists are active)
- removed obsolete code in Blacklist_p servlet
servlet since YaCy 1.63. This is much more performant for the client
than using the XMLResponseWriter because parsing of XML data is very CPU
intensive. Older YaCy peers are still requested using the
XMLResponseWriter but the majority of YaCy peers already respond with
the binary writer. This makes remote searches much faster and less CPU
intensive.
for anchor attributes.
- this caused that large portions of the parser code had to be adopted
as well
- added a counter target_order_i for anchor links in webgraph
computation
all unique links! This made it necessary, that a large portion of the
parser and link processing classes must be adopted to carry a different
type of link collection which carry a property attribute which are
attached to web anchors.
- introduction of a new URL class, AnchorURL
- the other url classes, DigestURI and MultiProtocolURI had been renamed
and refactored to fit into a new document package schema, document.id
- cleanup of net.yacy.cora.document package and refactoring
in intranets and the internet can now choose to appear as Googlebot.
This is an essential necessity to be able to compete in the field of
commercial search appliances, since most web pages are these days
optimized only for Google and no other search platform any more. All
commercial search engine providers have a built-in fake-Google User
Agent to be able to get the same search index as Google can do. Without
the resistance against obeying to robots.txt in this case, no
competition is possible any more. YaCy will always obey the robots.txt
when it is used for crawling the web in a peer-to-peer network, but to
establish a Search Appliance (like a Google Search Appliance, GSA) it is
necessary to be able to behave exactly like a Google crawler.
With this change, you will be able to switch the user agent when portal
or intranet mode is selected on per-crawl-start basis. Every crawl start
can have a different user agent.
- Rewrote usage of HashMap/Map to concurrent versions (to avoid a
CME=ConcurrentModificationException)
- Rewrote ConnectionInfo (as an example) to use a synchronized iterator
instead of synchronizing an
already synced HashSet (see Collections call)
- This avoids catching CMEs again
- Commented out noisy ConcurrentLog.logException() call
Conflicts:
source/net/yacy/repository/LoaderDispatcher.java
jdk-based logger tend to block
at java.util.logging.Logger.log(Logger.java:476) in concurrent
environments. This makes logging a main performance issue. To overcome
this problem, this is a add-on to jdk logging to put log entries on a
concurrent message queue and log the messages one by one using a
separate process.
- FTPClient uses the concurrent logging instead of the log4j logger
signal in case that a cleanup process wants to remove the search
process. Added also a new cleanup process which can reduce the number of
stored searches to a specific number which can be higher or lower
according to the remaining RAM. The cleanup process is called every time
a search ist started.
soft commits, reduced caching size of search events, ensured that solr
results are processed before connection is closed to keep that stuff not
too long in RAM
id to be tested, but with a collection of ids. This will cause only a
single call to solr instead of many. The result is a much better
performace when testing the existence of many urls. The effect should
cause very much less IO during index transmission, both on sender and
receiver side.
process counter if an blocking thread dies. Added also a new column in
PerformanceConcurrency_p servlet to show the actual number of concurrent
processes.
Because the index size is now provided by solr, and the only way to do
that is a match for [* TO *], a size computation is quite complex and
time-consuming. Therefore this patch prevents that the method is called
at all and if necessary puts a DOS-preventing barrier in front of it.
adjusted to smaller and 1-core devices.
- the workflow processor now starts no process at all. these are started
as soon as parser/condenser/indexing queues are filled.
- better abstraction
- no document search this time
- adjusted banner and network to not show 'WORDS' but DHT Chunks. This
is to avoid confusion for robinson peers which do not create Word
Entries
- an existing ranking servlet for solr was extended. It is now possible
to set boost values for fields, boost functions and boost queries.
- The ranking can have different instances, but currently only the first
one is used
- added an abstraction layer for fields which can be used for search and
those fields can be edited in the solr ranking configruation
- the ranking value from solr within the field score is used to combine
remote search requests, which all are created using the same locally
defined boost values
- reduced the number of fields which are used for search (makes it
faster)
- replaced some text fields by string fields (makes indexing faster)
- removed classes which had no use
- made a large number of experiments for a better ranking and created a
temporary setting which prefers hits inside titles
- adjusted also the RWI-based ranking computation to 'prefer title'
- made special cases like for portal search where no post-processing and
post-ranking is wanted: this keeps the original ranking order as done by
Solr
- fixed many bugs with old settings for ranking
are exactly at only that size which is needed to present the current
search result page. This will also cause that next solr request are made
automatically during switching to next pages.
- removed 'worker' processes
- no internal time-out behaviour: methods either are successful or
return null
- waiting is only done on top-level
- removed snippet-production; this is replaced by solr snippets
- removed statistics based on solr size queries (they had been VERY
long); the statistics (like suggestions or tag cloud) are now again
based on the old but very fast RWI index. In portal or intranet mode the
RWI index is usually switched off; if you like to have statistics again
then you must switch on the rwis again in this mode.
- fixed many bugs regarding correct page counter
Conflicts:
htroot/IndexFederated_p.html
source/net/yacy/cora/federate/solr/YaCySchema.java
source/net/yacy/peers/Protocol.java
source/net/yacy/search/Switchboard.java
source/net/yacy/search/index/Segment.java
also moved portalsearch-dev to yacy-portalsearch to be able to fix
problems with new attachment to solr of the search widget
The default schema uses only some of them and the resting search index
has now the following properties:
- webgraph size will have about 40 times as much entries as default
index
- the complete index size will increase and may be about the double size
of current amount
As testing showed, not much indexing performance is lost. The default
index will be smaller (moved fields out of it); thus searching
can be faster.
The new index will cause that some old parts in YaCy can be removed,
i.e. specialized webgraph data and the noload crawler. The new index
will make it possible to:
- search within link texts of linked but not indexed documents (about 20
times of document index in size!!)
- get a very detailed link graph
- enhance ranking using a complete link graph
To get the full access to the new index, the API to solr has now two
access points: one with attribute core=collection1 for the default
search index and core=webgraph to the new webgraph search index. This is
also avaiable for p2p operation but client access is not yet
implemented.
structure, but is not filled yet. To have the opportunity of a second
core, multi-core functionality had to be implemented to the
deep-embedded solr:
- migrated the solr_40 directory content to a subdirectory
'collection1'; the previously used default core is now called
collection1
- added solr_40/webgraph subdirectory as second core
- added a servlet configuration for the second core 'webgraph' in
/IndexSchema_p.html
- added instance handling as addition to solr connections: all solr
connectors are now instances of an solr 'instance' object; this required
a complete re-design of the solr embedding
- migrated also caching and sharding ontop of new instance handling
- migrated the search apis to handle now the access to a specific core,
the default core named 'collection1'
- migrated the remote solr search interface to access shards of cores;
for the yacy remote search the default core is now called 'solr'; using
the peer address as solr address
- migrated the solr backup and restore process: old backups cannot be
used after this migration!
- redesign of solr instance handling in all methods which access the
instances: they cannot hold copies of these instances any more; the must
retrieve the actuall connection object every time they want to write to
it (this solves also some bugs when switching the index/network)
- added another schema 'solr.webgraph.schema', the old solr.keys.list is
replaced by solr.collection.schema
multiple solr cores instead of just one. Therefore it is now necessary
to distuingish between solr server connections (called an 'Instance')
and a connection to a single solr core. One Instance may now have
multiple connector classes assigned to it, each connecting to a single
core.
To support multiple cores it is also necessary to distinguish between
the connection configuration and the configuration of the index schema.
We will have multiple schema configurations in the future, each for
every solr core. This caused that the IndexFederated servlet had to be
split into two parts, the new Servlet for the Schema editor is now in
the IndexSchema Servlet.
Solr search interface in such way that it is possible to use this
interface for the yacyinteractive search. This search interface is now
much faster using the Solr search directly. For the Solr interface it
was necessary to create a translation from the YaCy search modifiers to
the Solr facet selection. This was added in such a way that it becomes
generic for the normal YaCy search and as a on-top evaluation for Solr
queries.
Marc Nause