cleanup: drop unused check_uboot_type

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

mk_mmc.sh

@@ -1582,124 +1582,6 @@ convert_uboot_to_dtb_board () {
 	process_dtb_conf
 }
 
-check_uboot_type () {
-	#New defines for hwpack:
-	conf_bl_http="http://rcn-ee.net/deb/tools/latest"
-	conf_bl_listfile="bootloader-ng"
-
-	unset error_invalid_uboot_dtb
-	unset USE_KMS
-	unset conf_fdtfile
-	unset need_dtbs
-	kernel_repo="STABLE"
-
-	unset spl_name
-	unset boot_name
-	unset bootloader_location
-	unset dd_spl_uboot_seek
-	unset dd_spl_uboot_bs
-	unset dd_uboot_seek
-	unset dd_uboot_bs
-
-	unset boot_scr_wrapper
-	unset usbnet_mem
-
-	case "${UBOOT_TYPE}" in
-	beagle_bx)
-		echo "Note: [--dtb omap3-beagle] now replaces [--uboot beagle_bx]"
-		. "${DIR}"/hwpack/omap3-beagle.conf
-		convert_uboot_to_dtb_board
-		;;
-	beagle_cx)
-		echo "Note: [--dtb omap3-beagle] now replaces [--uboot beagle_cx]"
-		. "${DIR}"/hwpack/omap3-beagle.conf
-		convert_uboot_to_dtb_board
-		;;
-	beagle_xm)
-		echo "Note: [--dtb omap3-beagle-xm] now replaces [--uboot beagle_xm]"
-		. "${DIR}"/hwpack/omap3-beagle-xm.conf
-		convert_uboot_to_dtb_board
-		;;
-	bone-serial|bone)
-		#Bootloader Partition:
-		conf_boot_fstype="fat"
-		conf_boot_startmb="1"
-		conf_boot_endmb="96"
-
-		need_am335x_firmware="1"
-		conf_entrypt="uenvcmd"
-		SYSTEM="bone"
-		conf_board="BEAGLEBONE_A"
-		is_omap
-		SERIAL="ttyO0"
-		SERIAL_CONSOLE="${SERIAL},115200n8"
-
-		kernel_subarch="omap-psp"
-
-		SERIAL_MODE=1
-
-		unset HAS_OMAPFB_DSS2
-		unset KMS_VIDEOA
-
-		#just to disable the omapfb stuff..
-		USE_KMS=1
-		conf_note="Note: During the install use a 5Volt DC power supply as USB does not always provide enough power. If board locks up on boot run [sudo ifconfig usb0 up] on host."
-		conf_uboot_CONFIG_CMD_BOOTZ=1
-		conf_uboot_CONFIG_CMD_FS_GENERIC=1
-		conf_uboot_use_uenvcmd=1
-		convert_uboot_to_dtb_board
-		;;
-	bone-video)
-		#Bootloader Partition:
-		conf_boot_fstype="fat"
-		conf_boot_startmb="1"
-		conf_boot_endmb="96"
-
-		need_am335x_firmware="1"
-		conf_entrypt="uenvcmd"
-		SYSTEM="bone"
-		conf_board="BEAGLEBONE_A"
-		is_omap
-		SERIAL="ttyO0"
-		SERIAL_CONSOLE="${SERIAL},115200n8"
-
-		kernel_subarch="omap-psp"
-
-		unset HAS_OMAPFB_DSS2
-		unset KMS_VIDEOA
-
-		#just to disable the omapfb stuff..
-		USE_KMS=1
-		conf_note="Note: During the install use a 5Volt DC power supply as USB does not always provide enough power. If board locks up on boot run [sudo ifconfig usb0 up] on host."
-		conf_uboot_CONFIG_CMD_BOOTZ=1
-		conf_uboot_CONFIG_CMD_FS_GENERIC=1
-		conf_uboot_use_uenvcmd=1
-		convert_uboot_to_dtb_board
-		;;
-	bone_dt|bone_dtb)
-		echo "Note: [--dtb am335x-bone-serial] now replaces [--uboot bone_dtb]"
-		. "${DIR}"/hwpack/am335x-bone-serial.conf
-		dtb_board="am335x-bone-serial"
-		convert_uboot_to_dtb_board
-		;;
-	panda)
-		echo "Note: [--dtb omap4-panda] now replaces [--uboot panda]"
-		. "${DIR}"/hwpack/omap4-panda.conf
-		convert_uboot_to_dtb_board
-		;;
-	panda_es)
-		echo "Note: [--dtb omap4-panda-es] now replaces [--uboot panda_es]"
-		. "${DIR}"/hwpack/omap4-panda-es.conf
-		convert_uboot_to_dtb_board
-		;;
-	*)
-		error_invalid_uboot_dtb=1
-		uboot_dtb_error
-		exit
-		;;
-	esac
-}
-
 check_distro () {
 	unset IN_VALID_DISTRO
 	ARCH="armhf"