hwpack: add tegra124-jetson-tk1, just waiting for 3.15-rc5-armv7-lpae-x2 deb packages

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

hwpack/tegra124-jetson-tk1.conf

@@ -0,0 +1,56 @@
+#!/bin/bash
+#        --dtb tegra124-jetson-tk1 (NVIDIA Jetson TK1:supported)
+
+conf_board="tegra124-jetson-tk1"
+
+#Bootloader:
+conf_bootloader_in_flash="1"
+
+#Bootloader Partition:
+conf_boot_fstype="ext2"
+
+#Bootloader: u-boot features:
+
+#CONFIG_CMD_BOOTZ
+#bootz & zImage
+conf_uboot_CONFIG_CMD_BOOTZ=1
+
+#CONFIG_SUPPORT_RAW_INITRD
+#allows booting un-mkimage wrapped initrds
+conf_uboot_CONFIG_SUPPORT_RAW_INITRD=1
+
+#CONFIG_CMD_FS_GENERIC
+#allows using "load" over "fatload"/"ext2load"
+conf_uboot_CONFIG_CMD_FS_GENERIC=1
+
+#uenvcmd avaiable?
+conf_uboot_use_uenvcmd=1
+#conf_uboot_no_uenvcmd="loaduimage"
+
+#can the bootloader auto detect the device: (*.dtb)?
+#uboot_fdt_auto_detection=1
+
+conf_uboot_bootscript="boot.scr"
+
+#Kernel:
+#https://rcn-ee.net/deb/wheezy-armhf/LATEST-armv7-lpae
+kernel_subarch="armv7-lpae"
+kernel_repo="STABLE"
+#kernel_repo="TESTING"
+
+usbnet_mem=
+
+#Kernel: Bootloader Settings:
+conf_zreladdr="0x81000000"
+conf_loadaddr="0x80408000"
+conf_fdtaddr="0x82000000"
+conf_initrdaddr="0x82100000"
+conf_fdtfile="tegra124-jetson-tk1.dtb"
+
+SERIAL="ttyS1"
+SERIAL_CONSOLE="${SERIAL},115200"
+
+SERIAL_MODE=1
+
+conf_note="Required: https://github.com/NVIDIA/tegra-uboot-flasher-scripts."
+#

mk_mmc.sh

@@ -1240,12 +1240,27 @@ populate_boot () {
 				env import -t \${loadaddr} \${filesize}
 				run uenvcmd
 			__EOF__
+			;;
+		tegra124-jetson-tk1.dtb)
+			cat > ${TEMPDIR}/bootscripts/loader.cmd <<-__EOF__
+				echo "${conf_uboot_bootscript} -> uEnv.txt wrapper..."
+				setenv mmcdev \$devnum
+				setenv mmcpart \$rootpart
+				${conf_fileload} mmc \${mmcdev}:\${mmcpart} \${loadaddr} uEnv.txt
+				env import -t \${loadaddr} \${filesize}
+				run uenvcmd
+			__EOF__
+			;;
+		esac
+		if [ -f ${TEMPDIR}/bootscripts/loader.cmd ] ; then
 			cat ${TEMPDIR}/bootscripts/loader.cmd
 			echo "-----------------------------"
 			mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "wrapper" -d ${TEMPDIR}/bootscripts/loader.cmd ${TEMPDIR}/disk/${conf_uboot_bootscript}
 			cp -v ${TEMPDIR}/disk/${conf_uboot_bootscript} ${TEMPDIR}/disk/backup/${conf_uboot_bootscript}
-			;;
-		esac
+		else
+			echo "Error: conf_fdtfile not defined with conf_uboot_bootscript"
+			exit 1
+		fi
 	fi
 
 	echo "Copying uEnv.txt based boot scripts to Boot Partition"