1) add a new sane "address" field (for outputs that have an
identifiable address, which doesn't include bare multisig)
2) with -deprecatedrpc: leave "reqSigs" and "addresses" intact
(with all weird/wrong behavior they have now)
3) without -deprecatedrpc: drop "reqSigs" and "addresses" entirely,
always.
This commit addresses #20809.
We add an additional 'error' property in the result of 'validateaddress' in case the address is not valid that gives a short description of why the address in invalid. We also change the error message returned by 'getaddressinfo' in case the address is invalid.
Create a fee_rate (sat/vB) RPC param and replace overloading the conf_target and
estimate_mode params in the following 6 RPCs with it:
- sendtoaddress
- sendmany
- send
- fundrawtransaction
- walletcreatefundedpsbt
- bumpfee
In RPC bumpfee, the previously existing fee_rate remains but the unit is changed
from BTC/kvB to sat/vB. This is a breaking change, but it should not be an
overly risky one, as the units change by a factor of 1e5 and any fees specified
in BTC/kvB after this commit will either be too low and raise an error or be 1
sat/vB and can be RBFed.
Update the test coverage for each RPC.
Co-authored-by: Murch <murch@murch.one>
0be29000c0 rpc: update conf_target helps for correctness/consistency (Jon Atack)
778b9be406 wallet, rpc: fix send subtract_fee_from_outputs help (Jon Atack)
603c005083 wallet: add rpc send explicit fee rate coverage (Jon Atack)
dd341e602d wallet: add sendtoaddress/sendmany explicit fee rate coverage (Jon Atack)
44e7bfa603 wallet: add walletcreatefundedpsbt explicit fee rate coverage (Jon Atack)
6e1ea4273e test: refactor for walletcreatefundedpsbt fee rate coverage (Jon Atack)
3ac7b0c6f1 wallet: fundrawtx fee rate coverage, fixup ParseConfirmTarget() (Jon Atack)
2d8eba8f84 wallet: combine redundant bumpfee invalid params and args tests (Jon Atack)
1697a40b6f wallet: improve bumpfee error/help, add explicit fee rate coverage (Jon Atack)
fc5721723d wallet: fix SetFeeEstimateMode() error message (Jon Atack)
052427eef1 wallet, bugfix: fix bumpfee with explicit fee rate modes (Jon Atack)
Pull request description:
Follow-up to #11413 providing a base to build on for #19543:
- bugfix for `bumpfee` raising a JSON error with explicit feerates, fixes issue #20219
- adds explicit feerate test coverage for `bumpfee`, `fundrawtransaction`, `walletcreatefundedpsbt`, `send`, `sendtoaddress`, and `sendmany`
- improves a few related RPC error messages and `ParseConfirmTarget()` / error message
- fixes/improves the explicit fee rate information in the 6 RPC helps, of which 2 were also missing `conf_target` sat/B units
This provides a spec and regression coverage for the potential next step of a universal `sat/vB` feerate argument (see #19543), as well as immediate coverage and minimum fixes for 0.21.
ACKs for top commit:
kallewoof:
Concept/Tested ACK 0be29000c0
meshcollider:
Code review + functional test run ACK 0be29000c0
Tree-SHA512: efd965003e991cba51d4504e2940f06ab3d742e34022e96a673606b44fad85596aa03a8c1809f06df7ebcf21a38e18a891e54392fe3d6fb4d120bbe4ea0cf5e0
-BEGIN VERIFY SCRIPT-
# max-depth=0 excludes test/functional/test_framework/...
FILES=$(git grep -l --max-depth 0 "connect_nodes" test/functional)
# Replace (dis)?connect_nodes(self.nodes[a], b) with self.(dis)?connect_nodes(a, b)
sed -i 's/\b\(dis\)\?connect_nodes(self\.nodes\[\(.*\)\]/self.\1connect_nodes(\2/g' $FILES
# Remove imports in the middle of a line
sed -i 's/\(dis\)\?connect_nodes, //g' $FILES
sed -i 's/, \(dis\)\?connect_nodes//g' $FILES
# Remove imports on a line by themselves
sed -i '/^\s*\(dis\)\?connect_nodes,\?$/d' $FILES
sed -i '/^from test_framework\.util import connect_nodes$/d' $FILES
-END VERIFY SCRIPT-
Co-authored-by: Elliott Jin <elliott.jin@gmail.com>
3340dbadd3 Remove -zapwallettxes (Andrew Chow)
Pull request description:
It's not clear what use there is to keeping `-zapwallettxes` given that it's intended usage has been superseded by `abandontransaction`. So this removes it outright.
Alternative to #19700
ACKs for top commit:
meshcollider:
utACK 3340dbadd3
fanquake:
ACK 3340dbadd3 - remaining manpage references will get cleaned up pre-release.
Tree-SHA512: 3e58e1ef6f4f94894d012b93e88baba3fb9c2ad75b8349403f9ce95b80b50b0b4f443cb623cf76c355930db109f491b3442be3aa02972e841450ce52cf545fc8
-zapwallettxes is made a hidden option to inform users that it is
removed and they should be using abandontransaction to do the stuck
transaction thing.
6d1f51343c [rpc] fundrawtransaction, walletcreatefundedpsbt lock manually selected coins (Sjors Provoost)
Pull request description:
When using `fundrawtransaction` and `walletcreatefundedpsbt` with `lockUnspents`, it would only lock automatically selected coins, not manually selected coins. That doesn't make much sense to me if the goal is to prevent accidentally double-spending yourself before you broadcast a transaction.
Note that when creating a transaction, manually selected coins are automatic "unlocked" (or more accurately: the lock is ignored). Earlier versions of this PR introduced an error when a locked coin is manually selected, but this idea was abandoned after some discussion. An application that uses this RPC should either rely on automatic coin selection (with `lockUnspents`) or handle lock concurrency itself with manual coin selection. In particular it needs to make sure to avoid/pause calls with automatic coin selection between calling `lockunspent` and the subsequent spending RPC.
See #7518 for historical background.
ACKs for top commit:
meshcollider:
Code review ACK 6d1f51343c
fjahr:
Code review ACK 6d1f51343c
Tree-SHA512: 8773c788d92f2656952e1beac147ba9956b8c5132d474e0880e4c89ff53642928b4cbfcd1cb3d17798b9284f02618a8830c93a9f7a4733e5bded96adff1d5d4d
substitutes "for x in range(N):" by "for _ in range(N):"
indicates to the reader that a block is just repeated N times, and
that the loop counter is not used in the body
08fc6f6cfc [rpc] refactor: consolidate sendmany and sendtoaddress code (Sjors Provoost)
Pull request description:
I consolidated code between these two RPC calls, since `sendtoaddress` is essentially `sendmany` with 1 destination.
Unless I overlooked something, the only behaviour change is that some `sendtoaddress` error codes changed from `-4` to `-6`. The release note mentions this.
Salvaged from #18201.
ACKs for top commit:
fjahr:
Code review ACK 08fc6f6cfc
jonatack:
ACK 08fc6f6cfc
meshcollider:
Code review & functional test run ACK 08fc6f6cfc
Tree-SHA512: 7b66c52fa0444a4d02fc3f81d9c2a386794d447616026a30111eda35fb46510475eea6506a9ceda00bb4e0230ebb758da5d236b3ac05c954c044fa68a1e3e909
Adds a --descriptors option globally to the test framework. This will
make the test create and use descriptor wallets. However some tests may
not work with this.
Some tests are modified to work with --descriptors and run with that
option in test_runer:
* wallet_basic.py
* wallet_encryption.py
* wallet_keypool.py
* wallet_keypool_topup.py
* wallet_labels.py
* wallet_avoidreuse.py
- change the value returned in the RPC getaddressinfo `labels` field to an array
of label name strings
- deprecate the previous behavior of returning a JSON hash structure containing
label `name` and address `purpose` key/value pairs
- update the relevant tests
fadfd844de test: Remove unused connect_nodes_bi (MarcoFalke)
fa3b9ee8b2 scripted-diff: test: Replace connect_nodes_bi with connect_nodes (MarcoFalke)
faaee1e39a test: Use connect_nodes when connecting nodes in the test_framework (MarcoFalke)
1111bb91f5 test: Reformat python imports to aid scripted diff (MarcoFalke)
Pull request description:
By default all test nodes are connected in a chain. However, instead of just a single connection between each pair of nodes, we end up with up to four connections for a "middle" node (two outbound, two inbound, from each side).
This is generally redundant (tx and block relay should succeed with just a single connection) and confusing. For example, test timeouts after a call to `sync_` may be racy and hard to reproduce. On top of that, the test `debug.log`s are hard to read because txs and block invs may be relayed on the same connection multiple times.
Fix this by inlining `connect_nodes_bi` in the two tests that need it, and then replace it with a single `connect_nodes` in all other tests.
Historic background:
`connect_nodes_bi` has been introduced as a (temporary?) workaround for bug #5113 and #5138, which has long been fixed in #5157 and #5662.
ACKs for top commit:
laanwj:
ACK fadfd844de
jonasschnelli:
utACK fadfd844de - more of less a cleanup PR.
promag:
Tested ACK fadfd844de, ran extended tests.
Tree-SHA512: 2d027a8fd150749c071b64438a0a78ec922178628a7dbb89fd1212b0fa34febd451798c940101155d3617c0426c2c4865174147709894f1f1bb6cfa336aa7e24
2dfd6834ef test: Add test for default maxfeerate in sendrawtransaction (Joonmo Yang)
261843e4be wallet/rpc: Use the default maxfeerate value as BTC/kB (Joonmo Yang)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/16382
This patch tries to treat `maxfeerate` in sendrawtransaction/testmempoolaccept RPC as a rate(BTC/kB) instead of an absolute value(BTC).
The included test case checks if the new behavior works correctly, by using the transaction with an absolute fee of ~0.02BTC, where the fee rate is ~0.2BTC/kB.
This test should be failing if the default `maxfeerate` is 0.1BTC, but pass if the default value is 0.1BTC/kB
ACKs for top commit:
laanwj:
ACK 2dfd6834ef (ACKs by Sjors and MarcoFalke above for trivially different code)
Tree-SHA512: a1795bffe8a182acef8844797955db1f60bb0c0ded97148f3572dc265234d5219271a3a7aa0b6418a43f73b2b2720ef7412ba169c99bb1cdcac52051f537d6af
- Test gettransaction response without verbose, with verbose=False, and with verbose=True.
- In each case, test presence of expected fields in the output, including absence of the "decoded" field when `verbose` is not passed or false.
- Test that the "details" field contains the expected receive vout in each case.
PR 16866 renamed the 'decode' argument in gettransaction to 'verbose' to make it more consistent with other RPC calls like getrawtransaction.
However, it seems it inadvertently overloaded the 'details' fields when 'verbose' is passed. The result is that the original 'details' fields are no longer returned, which seems to be a breaking API change.
This PR takes the simplest path to restoring the 'details' fields by renaming them from 'details' back to 'decoded', while leaving the 'verbose' argument for API consistency.
It also addresses [this comment](https://github.com/bitcoin/bitcoin/pull/16185#discussion_r320740413) to mention that the 'decoded' field is identical to decoderawtransaction.
Update the RPC help, functional test, and release note.
This makes the RPC method consistent with other RPC methods that have a
'verbose' option.
Change the name of the return object from 'decoded' to details.
Update help text.
This RPC was added for testing wallet rebroadcasts. Since we now have a
real test for wallet rebroadcasts, it's no longer needed.
The call in wallet_basic.py can be removed because
wallet_resendwallettransactions.py tests wallet rebroadcast.
f13ad1cae0 modify test for memory locked in case locking pages failed at some point (Adam Jonas)
2fa85ebd1c add rpc_misc.py, mv test getmemoryinfo, add test mallocinfo (Adam Jonas)
Pull request description:
Creating the `rpc_misc.py` functional test file to add space for adding tests to a file that doesn't have a lot of coverage.
- Removing the `getmemoryinfo()` smoke test from wallet basic rather than moving it to keep the wallet decoupled. Feel like testing for reasonable memory allocation values should suffice.
- Adding coverage for `mallocinfo()`. Introduced standard lib XML parser since the function exports an XML string that describes the current state of the memory-allocation implementation in the caller.
Tree-SHA512: ced30115622916c88d1e729969ee331272ec9f2881eb36dee4bb7331bf633a6810a57fed63a0cfaf86de698edb5162e6a035efd07c89ece1df56b69d61288072
Michael Dietz