1) add a new sane "address" field (for outputs that have an
identifiable address, which doesn't include bare multisig)
2) with -deprecatedrpc: leave "reqSigs" and "addresses" intact
(with all weird/wrong behavior they have now)
3) without -deprecatedrpc: drop "reqSigs" and "addresses" entirely,
always.
48a0319bab Add a test that selects too large if BnB is used (Andrew Chow)
3e69939b78 Fail if maximum weight is too large (Andrew Chow)
51e2cd322c Have CalculateMaximumSignedTxSize also compute tx weight (Andrew Chow)
Pull request description:
Currently the `Transaction too large` is calculated on the transaction that is returned from `CreateTransaction`. This does not make sense for when `CreateTransaction` is being used for `fundrawtransaction` as no signing occurs so the final returned transaction is missing signatures. Thus users may successfully fund a transaction but fail to broadcast it after it has been fully signed.
So instead we should figure out whether the transaction we are funding will be too large after it is signed. We can do this by having `CalculateMaximumSignedTxSize` also return the transaction weight and then comparing that weight against the maximum weight.
ACKs for top commit:
instagibbs:
ACK 48a0319bab
meshcollider:
utACK 48a0319bab
Xekyo:
utACK with nits 48a0319bab
Tree-SHA512: 1700c60b07f67e2d5c591c5ccd131ac9f1861fab3def961c3c9c4b3281ec1063fe8e4f0f7f1038cac72692340856406bcee8fb45c8104d2ad34357a0ec878ac7
A check to raise an error on zero-fee txns was mistakenly extended in commit
a0d4957 from the bumpfee and send{toaddress, many} RPCs to also include
fundrawtransaction and walletcreatefundedpsbt.
This commit overrides zero fee rate checking for these two RPCs, not only for
the feeRate (BTC/kvB) arg to return to previous behavior, but also for the new
fee_rate (sat/vB) arg.
Create a fee_rate (sat/vB) RPC param and replace overloading the conf_target and
estimate_mode params in the following 6 RPCs with it:
- sendtoaddress
- sendmany
- send
- fundrawtransaction
- walletcreatefundedpsbt
- bumpfee
In RPC bumpfee, the previously existing fee_rate remains but the unit is changed
from BTC/kvB to sat/vB. This is a breaking change, but it should not be an
overly risky one, as the units change by a factor of 1e5 and any fees specified
in BTC/kvB after this commit will either be too low and raise an error or be 1
sat/vB and can be RBFed.
Update the test coverage for each RPC.
Co-authored-by: Murch <murch@murch.one>
0be29000c0 rpc: update conf_target helps for correctness/consistency (Jon Atack)
778b9be406 wallet, rpc: fix send subtract_fee_from_outputs help (Jon Atack)
603c005083 wallet: add rpc send explicit fee rate coverage (Jon Atack)
dd341e602d wallet: add sendtoaddress/sendmany explicit fee rate coverage (Jon Atack)
44e7bfa603 wallet: add walletcreatefundedpsbt explicit fee rate coverage (Jon Atack)
6e1ea4273e test: refactor for walletcreatefundedpsbt fee rate coverage (Jon Atack)
3ac7b0c6f1 wallet: fundrawtx fee rate coverage, fixup ParseConfirmTarget() (Jon Atack)
2d8eba8f84 wallet: combine redundant bumpfee invalid params and args tests (Jon Atack)
1697a40b6f wallet: improve bumpfee error/help, add explicit fee rate coverage (Jon Atack)
fc5721723d wallet: fix SetFeeEstimateMode() error message (Jon Atack)
052427eef1 wallet, bugfix: fix bumpfee with explicit fee rate modes (Jon Atack)
Pull request description:
Follow-up to #11413 providing a base to build on for #19543:
- bugfix for `bumpfee` raising a JSON error with explicit feerates, fixes issue #20219
- adds explicit feerate test coverage for `bumpfee`, `fundrawtransaction`, `walletcreatefundedpsbt`, `send`, `sendtoaddress`, and `sendmany`
- improves a few related RPC error messages and `ParseConfirmTarget()` / error message
- fixes/improves the explicit fee rate information in the 6 RPC helps, of which 2 were also missing `conf_target` sat/B units
This provides a spec and regression coverage for the potential next step of a universal `sat/vB` feerate argument (see #19543), as well as immediate coverage and minimum fixes for 0.21.
ACKs for top commit:
kallewoof:
Concept/Tested ACK 0be29000c0
meshcollider:
Code review + functional test run ACK 0be29000c0
Tree-SHA512: efd965003e991cba51d4504e2940f06ab3d742e34022e96a673606b44fad85596aa03a8c1809f06df7ebcf21a38e18a891e54392fe3d6fb4d120bbe4ea0cf5e0
-BEGIN VERIFY SCRIPT-
# max-depth=0 excludes test/functional/test_framework/...
FILES=$(git grep -l --max-depth 0 "connect_nodes" test/functional)
# Replace (dis)?connect_nodes(self.nodes[a], b) with self.(dis)?connect_nodes(a, b)
sed -i 's/\b\(dis\)\?connect_nodes(self\.nodes\[\(.*\)\]/self.\1connect_nodes(\2/g' $FILES
# Remove imports in the middle of a line
sed -i 's/\(dis\)\?connect_nodes, //g' $FILES
sed -i 's/, \(dis\)\?connect_nodes//g' $FILES
# Remove imports on a line by themselves
sed -i '/^\s*\(dis\)\?connect_nodes,\?$/d' $FILES
sed -i '/^from test_framework\.util import connect_nodes$/d' $FILES
-END VERIFY SCRIPT-
Co-authored-by: Elliott Jin <elliott.jin@gmail.com>
-BEGIN VERIFY SCRIPT-
sed -i 's/Fee exceeds maximum configured by \-\maxtxfee/Fee exceeds maximum configured by user (e.g. -maxtxfee, maxfeerate)/g' src/util/error.cpp test/functional/rpc_fundrawtransaction.py test/functional/rpc_psbt.py test/functional/rpc_rawtransaction.py test/functional/wallet_bumpfee.py test/functional/wallet_create_tx.py
-END VERIFY SCRIPT-
substitutes "for x in range(N):" by "for _ in range(N):"
indicates to the reader that a block is just repeated N times, and
that the loop counter is not used in the body
e5327f947c [rpc] fundrawtransaction: add_inputs option to control automatic input adding (Sjors Provoost)
79804fe24b [rpc] walletcreatefundedpsbt: don't automatically append inputs (Sjors Provoost)
Pull request description:
When the user doesn't specificy inputs, it makes sense to automatically select them. But when the user does specify inputs, `walletcreatefundedpsbt` now fails if the amount is insufficient, unless `addInputs` is set to `true`.
Similarly for `fundrawtransaction` if the original transaction already specified inputs, we only add more if `addInputs` is set to `true`.
This protects against fat finger mistakes in the amount or fee rate (see also #16257). The behavior is also more similar to GUI coin selection.
ACKs for top commit:
achow101:
ACK e5327f947c
meshcollider:
utACK e5327f947c
Tree-SHA512: d8653b820914396c7c25b0d0a2b7e92de214aa023bc1aa085feb37d3b20fab361ebea90416a7db989f19bdc37e26cf0adfbcb712c80985c87afa67a9bd44fecb
92bcd70808 [wallet] allow transaction without change if keypool is empty (Sjors Provoost)
709f8685ac [wallet] CreateTransaction: simplify change address check (Sjors Provoost)
5efc25f963 [wallet] translate "Keypool ran out" message (Sjors Provoost)
Pull request description:
Extracted from #16944
First this PR simplifies the check when generating a change address, by dropping `CanGetAddresses` and just letting `reservedest.GetReservedDestination` do this check.
Second, when the keypool is empty, instead of immediately giving up, we create a dummy change address and pass that to coin selection. If we didn't need the change address (e.g. when spending the entire balance), then it's all good. If we did need a change address, we throw the original error.
ACKs for top commit:
fjahr:
Code review ACK 92bcd70808
jonasschnelli:
utACK 92bcd70808
achow101:
ACK 92bcd70808
meshcollider:
Code review ACK 92bcd70808
Tree-SHA512: 07b8c8251f57061c58a85ebf0359be63583c23bac7a2c4cefdc14820c0cdebcc90a2bb218e5ede0db11d1e204cda149e056dfd18614642070b3d56efe2735006
This was only added in c1dde3a949 to match
behaviour when `encryptwallet` would restart the node. It's not required
for the test (and slows things down).
Most of the time in rpc_fundrawtransaction.py is spent waiting for
unconfirmed transactions to propagate. Net processing adds a poisson
random delay to the time it will INV transactions with a mean interval
of 5 seconds. Calls like the following:
```
self.nodes[2].sendrawtransaction(signedTx['hex'])
self.sync_all()
self.nodes[1].generate(1)
````
will therefore introduce a delay waiting for the mempools to sync.
Instead just generate the block on the node that sent the transaction:
```
self.nodes[2].sendrawtransaction(signedTx['hex'])
self.nodes[2].generate(1)
```
rpc_fundrawtransaction.py is not intended to be a test for transaction
relay, so it's ok to do this.
Doc changes only to test/functional/rpc_fundrawtransaction.py:
- remove ascii art or convert to a docstring when sufficiently different from
the logging
- touch up other comments while here
test/functional/rpc_fundrawtransaction.py is fairly long to run and has no
logging, so it can appear to be stalled.
This commit adds info logging at each test to provide feedback on the test run.
FundTransaction calls GetMinimumFee which, when the fee rate is absurdly high, quietly reduced the fee to -maxtxfee. Becaue an absurdly high fee rate is usually the result of a fat finger, aborting seems safer behavior.
c1dde3a949 No longer shutdown after encrypting the wallet (Andrew Chow)
d7637c5a3f After encrypting the wallet, reload the database environment (Andrew Chow)
5d296ac810 Add function to close all Db's and reload the databae environment (Andrew Chow)
a769461d5e Move BerkeleyEnvironment deletion from internal method to callsite (Andrew Chow)
Pull request description:
This is the replacement for #11678 which implements @ryanofsky's [suggestion](https://github.com/bitcoin/bitcoin/pull/11678#pullrequestreview-76464511).
Shutting down the software was to prevent the BDB environment from writing unencrypted private keys to disk in the database log files, as was noted [here](https://bitcointalk.org/index.php?topic=51474.msg616068#msg616068). This PR replaces the shutdown behavior with a CDBEnv flush, close, and reopen which achieves the same effect: everything is cleanly flushed and closed, the log files are removed, and then the environment reopened to continue normal operation.
To ensure that no unencrypted private keys are in the log files after encrypting the wallet, I wrote [this script](https://gist.github.com/achow101/7f7143e6c3d3fdc034d3470e72823e9d) to pull private keys from the original wallet file and searches for these keys in the log files (note that you will have to change your file paths to make it work on your own machine).
As for concerns about private keys being written to slack space or being kept in memory, these behaviors no longer exist after the original wallet encryption PR and the shutting down solution from 2011.
cc @ryanofsky
Tree-SHA512: 34b894283b0677a873d06dee46dff8424dec85a2973009ac9b84bcf3d22d05f227c494168c395219d9aee3178e420cf70d4b3eeacc9785aa86b6015d25758e75
891beb0 [test] fundrawtransaction: lock watch-only shared address (Karl-Johan Alm)
Pull request description:
`self.nodes[0]` creates an address which is watch-only-shared with `self.nodes[3]`. If `nodes[0]` spends the associated UTXO during any of its sends later, the watchonly test will fail, as `nodes[3]` now has insufficient funds.
I ran into this in #12257 and this commit is in that PR as well, but I figured I'd split it out (and remove from there once/if merged).
Tree-SHA512: d04a04b1ecebe82127cccd47c1b3de311bf07f4b51dff80db20ea2f142e1d5c4a85ed6180c5c0b081d550e238c742e119b953f60f487deac5a3f3536e1a8d9fe
self.nodes[0] creates an address which is watch-only-shared with self.nodes[3]. If nodes[0] spends the associated UTXO during any of its sends later, the watchonly test will fail, as nodes[3] now has insufficient funds.
Note that this also adds a new find_vout_for_address function to the test framework.
Based on suggestion by Pieter Wuille <pieter.wuille@gmail.com> at
https://github.com/bitcoin/bitcoin/pull/12119#issuecomment-357982763
After #12119, the NONE output type was overloaded to refer to either an output
type that couldn't be parsed, or to an automatic change output mode. This
change drops the NONE enum and uses a simple bool indicate parse failure, and a
new CHANGE_AUTO enum to refer the change output type.
This change is almost a pure refactoring except it makes RPCs reject empty
string ("") address types instead of treating them like they were unset. This
simplifies the parsing code a little bit and could prevent RPC usage mistakes.
It's noted in the release notes.
Change all instances of validateaddress to getaddressinfo since it seems that
no test actually uses validateaddress for actually validating addresses.
-BEGIN VERIFY SCRIPT-
find ./test/functional -path '*py' -not -path ./test/functional/wallet_disable.py -not -path ./test/functional/rpc_deprecated.py -not -path ./test/functional/wallet_address_types.py -exec sed -i'' -e 's/validateaddress/getaddressinfo/g' {} \;
-END VERIFY SCRIPT-
Michael Dietz