After reading
https://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.70/autoconf.html#Specifying-Target-Triplets,
my understanding is that this change should mostly be a no-op, as
--build defaults to the output of config.guess, however, this may be
slightly more correct
> For historical reasons, whenever you specify --host, be sure to
> specify --build too; this will be fixed in the future.
and will quell some warnings in depends (#16354). If anything, this
also explicitly enables cross-compilation mode when `--host` differs
from `--build`.
As for "fixed in the future", this is the case for Autoconf 2.70+.
246774e264 depends: fix Qt precompiled headers bug (Igor Cota)
8e7ad4146d depends: disable Qt Vulkan support on Android (Igor Cota)
ba46adaa1a CI: add Android APK build to cirrus (Igor Cota)
7563720e30 CI: add Android APK build script (Igor Cota)
ebfb10cb75 Qt: add Android packaging support (Igor Cota)
Pull request description:
This PR is the third and final piece of the basic Android support puzzle - it depends on https://github.com/bitcoin/bitcoin/pull/16110 and is related to https://github.com/bitcoin/bitcoin/pull/16883. It introduces an `android` directory under `qt` and a simple way to build an Android package of `bitcoin-qt`:
1. Build depends for Android as described in the [README](https://github.com/bitcoin/bitcoin/blob/master/depends/README.md)
2. Configure with one of the resulting prefixes
3. Run `make && make apk` in `src/qt`
The resulting APK files will be in `android/build/outputs/apk`. You can install them manually or with [adb](https://developer.android.com/studio/command-line/adb). One can also open the `android` directory in Android Studio for that integrated development and debugging experience. `BitcoinQtActivity` is your starting point.
Under the hood makefile `apk` target:
1. Renames the `bitcoin-qt` binary to `libbitcoin-qt.so` and copies it over to a folder under `android/libs` depending on which prefix and corresponding [ABI](https://developer.android.com/ndk/guides/abis.html#sa) `bitcoin-qt` was built for
2. Takes `libc++_shared.so` from the Android NDK and puts in the same place. It [must be included](https://developer.android.com/ndk/guides/cpp-support) in the APK
3. Extracts Qt for Android Java support files from the `qtbase` archive in `depends/sources` to `android/src`
There is also just a tiny bit of `ifdef`'d code to make the Qt Widgets menus usable. It's not pretty but it works and is a stepping stone towards https://github.com/bitcoin/bitcoin/pull/16883.
ACKs for top commit:
MarcoFalke:
cr ACK 246774e264
laanwj:
Code review ACK 246774e264
Tree-SHA512: ba30a746576a167545223c35a51ae60bb0838818779fc152c210f5af1413961b2a6ab6af520ff92cbc8dcd5dcb663e81ca960f021218430c1f76397ed4cead6c
180dc3c886 build: miniupnpc 2.2.2 (fanquake)
Pull request description:
Creating the dll subdir is no-longer required.
We can drop our wingen patch.
One issue that came up in [#19867](https://github.com/bitcoin/bitcoin/pull/19867#discussion_r483516359):
> unrelated to this change but: why are we inserting the architecture in here, seems like something not necessary to reveal
> My assumption is that it was being inserted to make depends more deterministic. However I think we can improve this, as there's no reason to reveal more of the version information either. Could leave the version as is /2.0 and either drop the architecture, or insert something else?
I've dropped our `sed` and added a patch that just removes the OS string and miniupnpc version from the User-Agent. i.e:
```bash
# master
strings depends/x86_64-apple-darwin19.6.0/lib/libminiupnpc.a | rg -i User-Agent
User-Agent: x86_64-apple-darwin19.6.0, UPnP/1.1, MiniUPnPc/2.0.20180203
User-Agent: x86_64-apple-darwin19.6.0, UPnP/1.1, MiniUPnPc/2.0.20180203
# this PR
strings depends/x86_64-apple-darwin19.6.0/lib/libminiupnpc.a | rg -i User-Agent
User-Agent: UPnP/1.1
User-Agent: UPnP/1.1
```
Note that built unmodified (22c1386351), the User-Agent would be:
```bash
strings libminiupnpc.dylib | rg User-Agent
User-Agent: Darwin/19.6.0, UPnP/1.1, MiniUPnPc/2.2.0
User-Agent: Darwin/19.6.0, UPnP/1.1, MiniUPnPc/2.2.0
```
ACKs for top commit:
laanwj:
Code review ACK 180dc3c886
hebasto:
ACK 180dc3c886.
Tree-SHA512: b0b6e623dbc5499e28faedf992d84278d6a11887a45a3806957b9e08886c5e56044cdfa2e7d7ec81cb1dd55f89be99834367905315d6bc611ba530e91d889ad1
See:
- QTBUG-72903, commit 9864d2c6f3b628ca9f07a56b197e77bd43931cca
- QTBUG-78873, commit e55a61a77f0c87c05661a0335dfdb12673c6a27f
Could be dropped for Qt 5.14+.
This tries to invoke xcrun, which is not available when cross-compiling.
Given we are in control of the SDK versions being used, removing this
check has minimal-no effect.
remove fix_configure_mac.patch
Fixed upstream: https://bugreports.qt.io/browse/QTBUG-67286
remove fix_riscv64_arch.patch
Was fixed upstream in 6a39e49a6cdeb28a04a3657bb6a22f848d5dfa9d
remove fix_rcc_determinism.patch
Fixed upstream in https://bugreports.qt.io/browse/QTBUG-62511
remove freetype_back_compat.patch
By the time we ship a release with Qt 5.12, we'll certainly no-longer be
supporting Ubuntu 14.04 and Ubuntu 16.04 ships with FreeType 2.6.1,
which is new enough that using the symbol is no-longer an issue.
The renaming of FT_Get_X11_Font_Format() happened in FreeType 2.6
remove xkb-default.patch
This was removed upstream in d5abf545971da717014d316127045fc19edbcd65
Co-authored-by: Hennadii Stepanov <32963518+hebasto@users.noreply.github.com>
A fix for QTBUG-34748 was introduced in #5915 (v0.11.0, Qt 5.2.1).
QTBUG-34748 was fixed in version 5.3.0.
The separated patch file, provided by #5915, was dropped in #12971 while
bumping Qt to 5.9.4 (5.9.6). But libxcb.mk remained unchanged.
This change reverts #5915 for libxcb.mk.
7af25024e9 build: compile libnatpmp with -DNATPMP_STATICLIB on Windows (fanquake)
ee35745754 build: use newer source for libnatpmp (fanquake)
Pull request description:
The source we are currently using is from 2015. The upstream repo has
received a small number of bug fixes and improvements since then.
Including one that fixes an issue for Windows users: https://github.com/miniupnp/libnatpmp/pull/13.
The source we are currently using is the most recent "official" release,
however I don't think it's worth waiting for a new one. The maintainer
was prompted to do so in Oct 2020, then again in Jan of this year, and
no release has eventuated. Given libnatpmp is a new inclusion into our
repository, I think we should be using this newer source.
This also cleans up a few warnings we currently see in Windows depends builds:
```bash
Extracting libnatpmp...
/home/ubuntu/bitcoin/depends/sources/libnatpmp-20150609.tar.gz: OK
Preprocessing libnatpmp...
Configuring libnatpmp...
Building libnatpmp...
make[1]: Entering directory '/home/ubuntu/bitcoin/depends/work/build/x86_64-w64-mingw32/libnatpmp/20150609-13efa1beb87'
x86_64-w64-mingw32-gcc -Os -fPIC -Wall -DENABLE_STRNATPMPERR -c -o natpmp.o natpmp.c
x86_64-w64-mingw32-gcc -Os -fPIC -Wall -DENABLE_STRNATPMPERR -c -o getgateway.o getgateway.c
natpmp.c:42: warning: "EWOULDBLOCK" redefined
42 | #define EWOULDBLOCK WSAEWOULDBLOCK
|
In file included from natpmp.c:38:
/usr/share/mingw-w64/include/errno.h:166: note: this is the location of the previous definition
166 | #define EWOULDBLOCK 140
|
natpmp.c:43: warning: "ECONNREFUSED" redefined
43 | #define ECONNREFUSED WSAECONNREFUSED
|
In file included from natpmp.c:38:
/usr/share/mingw-w64/include/errno.h:110: note: this is the location of the previous definition
110 | #define ECONNREFUSED 107
|
natpmp.c:271:5: warning: ‘readnatpmpresponseorretry’ redeclared without dllimport attribute: previous dllimport ignored [-Wattributes]
271 | int readnatpmpresponseorretry(natpmp_t * p, natpmpresp_t * response)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
ar crs libnatpmp.a natpmp.o getgateway.o
make[1]: Leaving directory '/home/ubuntu/bitcoin/depends/work/build/x86_64-w64-mingw32/libnatpmp/20150609-13efa1beb87'
Staging libnatpmp...
Postprocessing libnatpmp...
Caching libnatpmp...
```
ACKs for top commit:
hebasto:
ACK 7af25024e9
Tree-SHA512: 6939014ea986149a5bfdd42b516d563a65ae643516e234579d3f28e7c2f877b0270cc4305ae7c7cb131d6d946a6e0aedc84b4cc880a412612a878a333398b9d7
The source we are currently using is from 2015. The upstream repo has
received a small number of bug fixes and improvements since then.
Including one that fixes an issue for Windows users:
https://github.com/miniupnp/libnatpmp/pull/13.
The source we are currently using is the most recent "official" release,
however I don't think it's worth waiting for a new one. The maintainer
was prompted to do so in Oct 2020, then again in Jan of this year, and
no release has eventuated. Given libnatpmp is a new inclusion into our
repository, I think we should be using this newer source.
This also cleans up a few warnings we currently see in depends builds:
```bash
Extracting libnatpmp...
/home/ubuntu/bitcoin/depends/sources/libnatpmp-20150609.tar.gz: OK
Preprocessing libnatpmp...
Configuring libnatpmp...
Building libnatpmp...
make[1]: Entering directory '/home/ubuntu/bitcoin/depends/work/build/x86_64-w64-mingw32/libnatpmp/20150609-13efa1beb87'
x86_64-w64-mingw32-gcc -Os -fPIC -Wall -DENABLE_STRNATPMPERR -c -o natpmp.o natpmp.c
x86_64-w64-mingw32-gcc -Os -fPIC -Wall -DENABLE_STRNATPMPERR -c -o getgateway.o getgateway.c
natpmp.c:42: warning: "EWOULDBLOCK" redefined
42 | #define EWOULDBLOCK WSAEWOULDBLOCK
|
In file included from natpmp.c:38:
/usr/share/mingw-w64/include/errno.h:166: note: this is the location of the previous definition
166 | #define EWOULDBLOCK 140
|
natpmp.c:43: warning: "ECONNREFUSED" redefined
43 | #define ECONNREFUSED WSAECONNREFUSED
|
In file included from natpmp.c:38:
/usr/share/mingw-w64/include/errno.h:110: note: this is the location of the previous definition
110 | #define ECONNREFUSED 107
|
natpmp.c:271:5: warning: ‘readnatpmpresponseorretry’ redeclared without dllimport attribute: previous dllimport ignored [-Wattributes]
271 | int readnatpmpresponseorretry(natpmp_t * p, natpmpresp_t * response)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
ar crs libnatpmp.a natpmp.o getgateway.o
make[1]: Leaving directory '/home/ubuntu/bitcoin/depends/work/build/x86_64-w64-mingw32/libnatpmp/20150609-13efa1beb87'
Staging libnatpmp...
Postprocessing libnatpmp...
Caching libnatpmp...
```
bd49ac4168 build: fix libnatpmp macos cross compile (fanquake)
Pull request description:
Currently, our cross-compile of libnatpmp for macOS doesn't work at all.
The wrong archiver is used, which produces an archive the linker doesn't like.
This becomes clear when configuring:
```bash
configure:25722: checking for initnatpmp in -lnatpmp
configure:25747: env -u C_INCLUDE_PATH -u CPLUS_INCLUDE_PATH -u OBJC_INCLUDE_PATH -u OBJCPLUS_INCLUDE_PATH -u CPATH -u LIBRARY_PATH /home/ubuntu/bitcoin/depends/x86_64-apple-darwin18/native/bin/clang++ --target=x86_64-apple-darwin18 <trim> -Wl,-headerpad_max_install_names -Wl,-dead_strip -Wl,-dead_strip_dylibs conftest.cpp -lnatpmp >&5
ld: archive has no table of contents for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
```
Fix this by using the right `ar` (we do the same for upnp).
While we're at it, fix the build so that we are using our c/ppflags.
In practice this basically means building with `-O2` rather than `-Os`.
Note that this fixes an issue that is also fixed by #21209. However, given there are reservations about updating to use a newer libnatpmp source, we should just fix this for now.
ACKs for top commit:
hebasto:
ACK bd49ac4168, tested:
Tree-SHA512: 2efc2c788ef3ebebfbf564ef07b6cf63a72d8a0bccc22b0ba36537216aa575436b7e87088477e85f6d9191ad34f0b13f1c22cf88c90e1cb81641bfee5dc3058a
76f52e3da3 build: Fix Qt processing of configure script for depends with DEBUG=1 (Hennadii Stepanov)
Pull request description:
This PR:
- makes the `configure` script correctly pickup Qt if depends is built with `DEBUG=1`:
- for Windows -- fix#19266
- for macOS -- fix#16391
- is an alternative to #18117 (without downsides)
ACKs for top commit:
fanquake:
ACK 76f52e3da3. Tested native darwin, and darwin/win cross compile with `DEBUG=1`.
Tree-SHA512: 8fde99302b4b06faf109315bddba9e3063b156c50f8f9863c2bd51718538c719429a63fdced071730c18022f2e559d3b25c1dcec3efa81fe79f657253680956a
Currently, our cross-compile of libnatpmp for macOS doesn't work at all.
The wrong archiver is used, which produces an archive the linker doesn't like.
This becomes clear when configuring:
```bash
configure:25722: checking for initnatpmp in -lnatpmp
configure:25747: env -u C_INCLUDE_PATH -u CPLUS_INCLUDE_PATH -u OBJC_INCLUDE_PATH -u OBJCPLUS_INCLUDE_PATH -u CPATH -u LIBRARY_PATH /home/ubuntu/bitcoin/depends/x86_64-apple-darwin18/native/bin/clang++ --target=x86_64-apple-darwin18 <trim> -Wl,-headerpad_max_install_names -Wl,-dead_strip -Wl,-dead_strip_dylibs conftest.cpp -lnatpmp >&5
ld: archive has no table of contents for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
```
Fix this by using the right `ar` (we do the same for upnp).
While we're at it, we fixe the build so that we are using our c/ppflags.
This means building with `-O2` rather than `-Os`.
Note that this fixes an issue that is also fixed by #21209.
However, given there are reservations about updating to use a newer libnatpmp source, we should just fix this for now.
5200929bfe depends: Include GUIX_ENVIRONMENT in id string (Carl Dong)
4c7d418588 depends: Improve id string robustness (Carl Dong)
b3bdff42b5 build: Proper quoting for var printing targets (Carl Dong)
Pull request description:
```
Environment variables and search paths can drastically effect the
operation of build tools.
Include these in our id string to mitigate against false cache hits.
```
Note to builders: This will invalidate all depends output caches in `BASE_CACHE`
ACKs for top commit:
laanwj:
re-ACK 5200929bfe
Tree-SHA512: e70c98da89cde90dc54bc3be89b925787cf94bbf246e27cc9345816b312073d78a02215448f731f21d8cf033c455234a2377ff1d66c00e1f3db69c9c9687d027
060a2a64d4 ci: remove boost thread installation (fanquake)
06e1d7d81d build: don't build or use Boost Thread (fanquake)
7097add83c refactor: replace Boost shared_mutex with std shared_mutex in sigcache (fanquake)
8e55981ef8 refactor: replace Boost shared_mutex with std shared_mutex in cuckoocache tests (fanquake)
Pull request description:
This replaces `boost::shared_mutex` and `boost::unique_lock` with [`std::shared_mutex`](https://en.cppreference.com/w/cpp/thread/shared_mutex) & [`std::unique_lock`](https://en.cppreference.com/w/cpp/thread/unique_lock).
Even though [some concerns were raised](https://github.com/bitcoin/bitcoin/issues/16684#issuecomment-726214696) in #16684 with regard to `std::shared_mutex` being unsafe to use across some glibc versions, I still think this change is an improvement. As I mentioned in #21022, I also think trying to restrict standard library feature usage based on bugs in glibc is not only hard to do, but it's not currently clear exactly how we do that in practice (does it also extend to patching out use in our dependencies, should we be implementing more runtime checks for features we are using, when do we consider an affected glibc "old enough" not to worry about? etc). If you take a look through the [glibc bug tracker](https://sourceware.org/bugzilla/describecomponents.cgi?product=glibc) you'll no doubt find plenty of (active) bug reports for standard library code we already using. Obviously not to say we shouldn't try and avoid buggy code where possible.
Two other points:
[Cory mentioned in #21022](https://github.com/bitcoin/bitcoin/pull/21022#issuecomment-769274179):
> It also seems reasonable to me to worry that boost hits the same underlying glibc bug, and we've just not happened to trigger the right conditions yet.
Moving away from Boost to the standard library also removes the potential for differences related to Boosts configuration. Boost has multiple versions of `shared_mutex`, and what you end up using, and what it's backed by depends on:
* The version of Boost.
* The platform you're building for.
* Which version of `BOOST_THREAD_VERSION` is defined: (2,3,4 or 5) default=2. (see [here](https://www.boost.org/doc/libs/1_70_0/doc/html/thread/build.html#thread.build.configuration) for some of the differences).
* Is `BOOST_THREAD_V2_SHARED_MUTEX` defined? (not by default). If so, you might get the ["less performant, but more robust"](https://github.com/boostorg/thread/issues/230#issuecomment-475937761) version of `shared_mutex`.
A lot of these factors are eliminated by our use of depends, but users will have varying configurations. It's also not inconceivable to think that a distro, or some package manager might start defining something like `BOOST_THREAD_VERSION=3`. Boost tried to change the default from 2 to 3 at one point.
With this change, we no longer use Boost Thread, so this PR also removes it from depends, the build system, CI etc.
Previous similar PRs were #19183 & #20922. The authors are included in the commits here.
Also related to #21022 - pthread sanity checking.
ACKs for top commit:
laanwj:
Code review ACK 060a2a64d4
vasild:
ACK 060a2a64d4
Tree-SHA512: 572d14d8c9de20bc434511f20d3f431836393ff915b2fe9de5a47a02dca76805ad5c3fc4cceecb4cd43f3ba939a0508178c4e60e62abdbaaa6b3e8db20b75b03
Environment variables and search paths can drastically effect the
operation of build tools.
Include these in our id string to mitigate against false cache hits.
This was missed in #20419, and the update before that, so just
make this un-versioned so that we don't have to worry about it.
This is fine, because it's just for downloading sources.
Instead of doing the awkward /bin path prepending at config.site
creation time, set darwin_{CC,CXX} in a way that fully determines the
program's path (clang/clang++) similar to how AC_PATH_{TOOL,PROG} would
do.
Also see the added comment block in depends/Makefile for more context on
determining $PATH for our config.site.
clang warns when a command line option is unused, and some of our tests
use Werror, so unfortunately we cannot use this flag to pin our linker
for now. Leaving this commit in for future reference, as it would be
great if there's more granularity to Werror and we can be explicit about
what linker we want to use.
Prior to this commit, when int_vars was called for packages, it would
immediately expand the "single-dollar variables", which may be defined
in terms of variables which are not yet determined (e.g. variables
defined in package/*.mk, which are included after int_vars is called).
This is required for the next commit as after that commit, for darwin
cross-builds:
0. int_vars is defined in terms of $(1)_cc
1. $(1)_cc is defined in terms of darwin_CC
2. ... which is defined in terms of clang_resource_dir
3. ... which is defined in terms of native_cctools_clang_version
4. which is undetermined at the time when int_vars is being expanded and evaluated
1112035d32 doc: fix various typos (Ikko Ashimine)
e8640849c7 doc: Use https URLs where possible (Sawyer Billings)
Pull request description:
Consolidates / fixes the changes from #20762, #20836, #20810. There is no output when `test/lint/lint-all.sh` is run.
Closes#20807.
ACKs for top commit:
MarcoFalke:
ACK 1112035d32
Tree-SHA512: 22ca824688758281a74e5ebc6a84a358142351434e34c88c6b36045d2d241ab95fd0958565fd2060f98317e62e683323b5320cc7ec13592bf340e6922294ed78
fanquake
