You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
litecoin/doc/release-notes.md

165 lines
6.9 KiB

Bitcoin Core version 0.17.1 is now available from:
estimatefee / estimatepriority RPC methods New RPC methods: return an estimate of the fee (or priority) a transaction needs to be likely to confirm in a given number of blocks. Mike Hearn created the first version of this method for estimating fees. It works as follows: For transactions that took 1 to N (I picked N=25) blocks to confirm, keep N buckets with at most 100 entries in each recording the fees-per-kilobyte paid by those transactions. (separate buckets are kept for transactions that confirmed because they are high-priority) The buckets are filled as blocks are found, and are saved/restored in a new fee_estiamtes.dat file in the data directory. A few variations on Mike's initial scheme: To estimate the fee needed for a transaction to confirm in X buckets, all of the samples in all of the buckets are used and a median of all of the data is used to make the estimate. For example, imagine 25 buckets each containing the full 100 entries. Those 2,500 samples are sorted, and the estimate of the fee needed to confirm in the very next block is the 50'th-highest-fee-entry in that sorted list; the estimate of the fee needed to confirm in the next two blocks is the 150'th-highest-fee-entry, etc. That algorithm has the nice property that estimates of how much fee you need to pay to get confirmed in block N will always be greater than or equal to the estimate for block N+1. It would clearly be wrong to say "pay 11 uBTC and you'll get confirmed in 3 blocks, but pay 12 uBTC and it will take LONGER". A single block will not contribute more than 10 entries to any one bucket, so a single miner and a large block cannot overwhelm the estimates.
11 years ago
<https://bitcoincore.org/bin/bitcoin-core-0.17.1/>
This is a new major version release, including new features, various bugfixes
and performance improvements, as well as updated translations.
Please report bugs using the issue tracker at GitHub:
<https://github.com/bitcoin/bitcoin/issues>
To receive security and update notifications, please subscribe to:
<https://bitcoincore.org/en/list/announcements/join/>
How to Upgrade
==============
If you are running an older version, shut it down. Wait until it has completely
shut down (which might take a few minutes for older versions), then run the
installer (on Windows) or just copy over `/Applications/Bitcoin-Qt` (on Mac)
or `bitcoind`/`bitcoin-qt` (on Linux).
If your node has a txindex, the txindex db will be migrated the first time you run 0.17.0 or newer, which may take up to a few hours. Your node will not be functional until this migration completes.
The first time you run version 0.15.0 or newer, your chainstate database will be converted to a
new format, which will take anywhere from a few minutes to half an hour,
depending on the speed of your machine.
Note that the block database format also changed in version 0.8.0 and there is no
automatic upgrade code from before version 0.8 to version 0.15.0. Upgrading
directly from 0.7.x and earlier without redownloading the blockchain is not supported.
However, as usual, old wallet versions are still supported.
Downgrading warning
-------------------
The chainstate database for this release is not compatible with previous
releases, so if you run 0.15 and then decide to switch back to any
older version, you will need to run the old release with the `-reindex-chainstate`
option to rebuild the chainstate data structures in the old format.
If your node has pruning enabled, this will entail re-downloading and
processing the entire blockchain.
Compatibility
==============
Bitcoin Core is extensively tested on multiple operating systems using
the Linux kernel, macOS 10.10+, and Windows 7 and newer (Windows XP is not supported).
Bitcoin Core should also work on most other Unix-like systems but is not
frequently tested on them.
From 0.17.0 onwards macOS <10.10 is no longer supported. 0.17.0 is built using Qt 5.9.x, which doesn't
support versions of macOS older than 10.10.
Notable changes
===============
`listtransactions` label support
--------------------------------
The `listtransactions` RPC `account` parameter which was deprecated in 0.17.0
and renamed to `dummy` has been un-deprecated and renamed again to `label`.
When bitcoin is configured with the `-deprecatedrpc=accounts` setting, specifying
a label/account/dummy argument will return both outgoing and incoming
transactions. Without the `-deprecatedrpc=accounts` setting, it will only return
incoming transactions (because it used to be possible to create transactions
spending from specific accounts, but this is no longer possible with labels).
When `-deprecatedrpc=accounts` is set, it's possible to pass the empty string ""
to list transactions that don't have any label. Without
`-deprecatedrpc=accounts`, passing the empty string is an error because returning
only non-labeled transactions is not generally useful behavior and can cause
confusion.
0.17.1 change log
=================
### P2P protocol and network code
- #14685 `9406502` Fix a deserialization overflow edge case (kazcw)
- #14728 `b901578` Fix uninitialized read when stringifying an addrLocal (kazcw)
### Wallet
- #14441 `5150acc` Restore ability to list incoming transactions by label (jnewbery)
- #13546 `91fa15a` Fix use of uninitialized value `bnb_used` in CWallet::CreateTransaction(…) (practicalswift)
- #14310 `bb90695` Ensure wallet is unlocked before signing (gustavonalle)
- #14690 `5782fdc` Throw error if CPubKey is invalid during PSBT keypath serialization (instagibbs)
- #14852 `2528443` backport: [tests] Add `wallet_balance.py` (MarcoFalke)
- #14196 `3362a95` psbt: always drop the unnecessary utxo and convert non-witness utxo to witness when necessary (achow101)
- #14588 `70ee1f8` Refactor PSBT signing logic to enforce invariant and fix signing bug (gwillen)
- #14424 `89a9a9d` Stop requiring imported pubkey to sign non-PKH schemes (sipa, MeshCollider)
### RPC and other APIs
- #14417 `fb9ad04` Fix listreceivedbyaddress not taking address as a string (etscrivner)
- #14596 `de5e48a` Bugfix: RPC: Add `address_type` named param for createmultisig (luke-jr)
- #14618 `9666dba` Make HTTP RPC debug logging more informative (practicalswift)
- #14197 `7bee414` [psbt] Convert non-witness UTXOs to witness if witness sig created (achow101)
- #14377 `a3fe125` Check that a separator is found for psbt inputs, outputs, and global map (achow101)
- #14356 `7a590d8` Fix converttopsbt permitsigdata arg, add basic test (instagibbs)
- #14453 `75b5d8c` Fix wallet unload during walletpassphrase timeout (promag)
### GUI
- #14403 `0242b5a` Revert "Force TLS1.0+ for SSL connections" (real-or-random)
- #14593 `df5131b` Explicitly disable "Dark Mode" appearance on macOS (fanquake)
### Build system
- #14647 `7edebed` Remove illegal spacing in darwin.mk (ch4ot1c)
- #14698 `ec71f06` Add bitcoin-tx.exe into Windows installer (ken2812221)
### Tests and QA
- #13965 `29899ec` Fix extended functional tests fail (ken2812221)
- #14011 `9461f98` Disable wallet and address book Qt tests on macOS minimal platform (ryanofsky)
- #14180 `86fadee` Run all tests even if wallet is not compiled (MarcoFalke)
- #14122 `8bc1bad` Test `rpc_help.py` failed: Check whether ZMQ is enabled or not (Kvaciral)
- #14101 `96dc936` Use named args in validation acceptance tests (MarcoFalke)
- #14020 `24d796a` Add tests for RPC help (promag)
- #14052 `7ff32a6` Add some actual witness in `rpc_rawtransaction` (MarcoFalke)
- #14215 `b72fbab` Use correct python index slices in example test (sdaftuar)
- #14024 `06544fa` Add `TestNode::assert_debug_log` (MarcoFalke)
- #14658 `60f7a97` Add test to ensure node can generate all rpc help texts at runtime (MarcoFalke)
- #14632 `96f15e8` Fix a comment (fridokus)
- #14700 `f9db08e` Avoid race in `p2p_invalid_block` by waiting for the block request (MarcoFalke)
- #14845 `67225e2` Add `wallet_balance.py` (jnewbery)
### Documentation
- #14161 `5f51fd6` doc/descriptors.md tweaks (ryanofsky)
- #14276 `85aacc4` Add autogen.sh in ARM Cross-compilation (walterwhite81)
Credits
=======
Thanks to everyone who directly contributed to this release:
- Andrew Chow
- Chun Kuan Lee
- David A. Harding
- Eric Scrivner
- fanquake
- fridokus
- Glenn Willen
- Gregory Sanders
- gustavonalle
- John Newbery
- Jon Layton
- Jonas Schnelli
- João Barbosa
- Kaz Wesley
- Kvaciral
- Luke Dashjr
- MarcoFalke
- MeshCollider
- Pieter Wuille
- practicalswift
- Russell Yanofsky
- Sjors Provoost
- Suhas Daftuar
- Tim Ruffing
- Walter
- Wladimir J. van der Laan
As well as everyone that helped translating on [Transifex](https://www.transifex.com/projects/p/bitcoin/).