yacy_search_server/yacy.init

###
### YACY Init File
###
# These properties will be loaded upon installation.
# They are used only once for set-up.
# If you make changes to this file and want these to make any effect,
# you must delete the httpProxy.conf file in DATA/SETTINGS

# ----------------------------------------------------------------------------
# the http service configurations

# port number of server
port = 8080

# shutdown time limit
# this is the time that a peer takes at most for shutdown
# the shutdown-procedure is difficult since there are many
# caches that must be flushed first
# measured in seconds
shutdownWaiting = 120

# time-out of client control socket in milliseconds
# since this applies only to the client-proxy connection,
# it can be rather short
# milliseconds
clientTimeout = 8000

# maximal number of httpd sessions
# a client may open several connections at one, and the maxSessions value sets
# a limit on the number of concurrent connections
httpdMaxSessions = 150

# default root path for the file server
# may be overridden by the htdocs parameter
# users shall be encouraged to use the htdocs path for individual content,
# not this path defined here
htRootPath = htroot
htTemplatePath = htroot/env/templates

# individual htroot folder
# every user may publicise her/his own web pages
# these pages shall be placed in the path defined here
# the htdocs path shares its content with the htroot path
htDocsPath = DATA/HTDOCS

# the default files (typically index.html), if no file name is given
# The complete path to this file is created by combination with the rootPath
# you can set a list of defaults, separated by comma
# the first one is priorized
defaultFiles = index.html,default.html,search.html,console.html,control.html,welcome.html,wiki.html,forum.html,blog.html,email.html,content.html,monitor.html,share.html,dir.html,readme.txt

# virtual host for httpdFileServlet access
# for example http://<fileHost>/ shall access the file servlet and
# return the defaultFile at rootPath
# either way, http://<fileHost>/ denotes the same as http://localhost:<port>/
# for the preconfigured value 'localpeer', the url is:
# http://localpeer/
fileHost = localpeer

# root path for message files
messPath = C:/AnomicServer

# specify the path to the MIME matching file table
mimeConfig = httpd.mime

# specify the path to message resource file
messConfig = httpd.messages

# proxy use. This server can also act as an caching proxy.
# to enable that function, set proxy=true
proxy=true

# a path to the proxy's file cache.
# This will be used if the server is addressed as a proxy
proxyCache = DATA/HTCACHE

# the proxy's maximum disc cache size in megabytes
# there should be enough space for the browsing load of an internet caffee
# running at 56kbit/s modem speed (this time not unusual)
# during 3 days, 8 hours a day
# necessary space = 3 * 8 * 60 * 60 * 56 / 8 = 604800 KB = ca. 590 MB
# since 600 MB is not much these days (it's below one GB!)
# we recommend using that space
#proxyCacheSize = 600
#for testing:
proxyCacheSize = 200

# the following mime-types are the whitelist for indexing
parseableMime=application/xhtml+xml,text/html,text/plain

# media extension string
# a comma-separated list of extensions that denote media file formats
# this is important to recognize <a href> - tags as not-html reference
# These files will be excluded from indexing
mediaExt=swf,wmv,jpg,jpeg,jpe,rm,mov,mpg,mpeg,mp3,asf,gif,png,avi,zip,rar,sit,hqx,img,dmg,tar,gz,ps,pdf,doc,xls,ppt,ram,bz2,arj,jar,deb,torrent,ogg,iso,bin,ace,tgz,rpm

# the proxy's and indexing maximum ram cache size in megabytes
ramCacheSize = 12
# ram cache is partitioned into different separate caches
# we define percentual shares of the complete ram cache
# values here are computed from usage profiles and should not be changed
# it is not computed if the complete sum of percentages computes to 100
ramCachePercentRWI     = 85
ramCachePercentHTTP    =  6
ramCachePercentLURL    =  4
ramCachePercentDHT     =  3
ramCachePercentMessage =  1
ramCachePercentWiki    =  1

# Promotion Strings
# These strings appear in the Web Mask of the YACY search client
# Set these Strings to cusomize your peer and give any message to
# other peer users
promoteSearchPageGreeting =

# the log level, each for a specific software part
# loglevels are:
# NULL    = 0: no output at all
# FAILURE = 1: system-level error, internal cause, critical and not fixeable (i.e. inconsistency)
# ERROR   = 2: exceptional error, catcheable and non-critical (i.e. file error)
# WARNING = 3: uncritical service failure, may require user activity (i.e. input required, wrong authorization)
# SYSTEM  = 4: regular system status information (i.e. start-up messages)
# INFO    = 5: regular action information (i.e. any httpd request URL)
# DEBUG   = 6: in-function status debug output
httpdLoglevel=4
proxyLoglevel=5
plasmaLoglevel=5
yacyLoglevel=5

# the path to the PLASMA database, especially the reverse word index
dbPath=DATA/PLASMADB

# the path to the LISTS files. Most lists are used to filter web content
listsPath=DATA/LISTS

# the path to the SKINS files.
skinPath=DATA/SKINS

# the yellow-list; url's elements
# (the core of an url; like 'yahoo' in 'de.yahoo.com')
# appearing in this list will not get a manipulated user agent string
proxyYellowList=yacy.yellow

# the black-list; url's appearing in this list will not be loaded;
# instead always a 404 is returned
# all these files will be placed in the listsPath
proxyBlackLists=url.default.black
proxyBlackListsActive=url.default.black
proxyBlackListsShared=url.default.black
proxyCookieBlackList=cookie.default.black
proxyCookieWhiteList=cookie.default.black

# the blue-list; 
# no search result is locally presented that has any word of the bluelist
# in the search words, the url or the url's description
plasmaBlueList=yacy.blue

# this proxy may in turn again access another proxy
# if you wish to do that, specify it here
# if you want to switch on the proxy use, set remoteProxyUse=true
# remoteProxyNoProxy is a no-proxy pattern list for the remote proxy
remoteProxyHost=192.168.2.2
remoteProxyPort=4239
remoteProxyNoProxy=192.*,10.*,127.*,localhost
remoteProxyUse=false
#remoteProxyUse=true

# the proxy may filter the content of transferred web pages
# the bluelist removes specific keywords from web pages
proxyBlueList=yacy.blue

# security settigns
# we provide proxy and server security through a 2-stage security gate:
# 1st stage: firewall-like access control trough ip filter for clients
# 2nd stage: password settings for proxy, server and server administrators
# by default, these settings are weak to simplify set-up and testing
# every user/adiministrator shall be encouraged to change these settings
# your can change them also online during run-time on
# http://localhost:8080/

# proxyClient: client-ip's that may connect the proxy for proxy service
# if several ip's are allowed then they must be separated by a ','
# any ip may contain the wildcard-sign '*'
#proxyClient=192.168.0.4
proxyClient=localhost,127.0.0.1,192.168*,10*

# serverClient: client-ip's that may connect to the web server,
# thus are allowed to use the search service
# if you set this to another value, search requst from others
# are blocked, but you will also be blocked from using others
# search services.
serverClient=*

# proxyAccount: a user:password - pair for proxy authentification
# leave empty for no authenication
# example:
#proxyAccount=jim:knopf
proxyAccount=
proxyAccountBase64MD5=

# serverAccount: a user:password - pair for web server access
# this is the access to the 'public' pages on the server
# should be always open, but you get the option here
# if set to a user:password, you get a conflict with the administration account
# future versions will check if the server is unprotected,
# because the p2p-index-sharing function will use the http server for
# data exchange.
# example
#serverAccount=dicke:berta
serverAccount=
serverAccountBase64MD5=

# adminAccount: a user:password - pair for administration of
# settings through the web interface
# should be set to a secret. By default it is without a password
# but you are encouraged to set it to another value on the page
# http://localhost:8080/
#adminAccount=admin:anomic
adminAccount=
adminAccountBase64MD5=

# peer-to-peer construction for distributed search
# we have several stages:
# 1st: a file within every distribution that has a list of URL's:
#      -> this is the superseed file
# 2nd: the files that can be retrieved by the superseed's URL's
#      are called seed list-files.
#      -> the seed list-files contain IP/port combinations of running
#         AnomicHTTPProxies
# 3rd: the peers that are targeted within the seed files are called superpeers
# 4th: the superpeers hold and share a list of all client/search/crawl peers
#
# some superpeers should be able to create again seed list-files.
# These superpeers must upload their IP or their list of peer-IP's to a
# ftp location to create the seed list-file.
# Everyone who do so should mail his/her new seed location to mc<at>anomic.de
# The seed list-file location will then be included in the superseed file.
# This superseed file is available then at two localtions:
# - it is included in every distribution and
# - updated through a specific URL-location
# we see the file name and the url of the superseed here:
superseedFile=superseed.txt
superseedLocation=http://www.yacy.net/superseed.txt

# if you are running a principal peer, you must update the following variables
# This is an ftp account with all relevant information
# the cycle parameter is the update period in minutes.
# The update is only made if there had been changes in between.
seedFTPServer=
seedFTPAccount=
seedFTPPassword=
seedFTPPath=
seedURL=

# alternatively to an FTP account, a peer can also become a principal peer
# if the seed-list can be generated as a file and that file is also accessible from
# the internet. In this case, omit any ftp settings and set this path here.
# if this path stays empty, an ftp account is considered
# however, you must always set a seedURL because it is used to check if the
# file is actually accessible from the internet
seedFilePath=

# every peer should have a name. inded, we try to give every peer an unique ID,
# which is necessary for internal organization of the index sharing, but the
# peer's name is purely informal. No function but information is applied.
# please change this at your pleasure
peerName=nameless

# every peer periodically scans for other peers. you can set the time
# of the period here (minutes)
peerCycle=2

# The p2p maintenance can run in either of two online modes:
# - process any job only if we are online, which is technically only the case
#   if the proxy is used -> mode 1
# - process jobs periodically, with periodes according to peerCycle -> mode 2
#onlineMode=1
onlineMode=2

# Debug mode for YACY network: this will trigger that also local ip's are
# accepted as peer addresses
yacyDebugMode=false

# if the process is running behind a NAT or ROUTER, we cannot easily identify
# the public IP of the process. We can ask a public IP responder, but cannot
# rely on it. Therefore, AnomicHTTPProxy includes it's own responder.
# But for the first running peer this is not an option.
# The author uses a DI-604 router, which can be
# asked for the public IP. If you own a DI-604 as well, please set the
# DI604use to true and put in your router password, it will not be used for any
# other purpose of asking for the IP
#DI604use=true
DI604use=false
DI604pw=

# each time the proxy starts up, it can trigger the local browser to show the
# status page. This is active by default, to make it easier for first-time
# users to understand what this application does. You can disable browser
# pop-up here or set a different start page, like the search page
# the browser type is optional and works only under certain conditions
#browserPopUpTrigger=false
browserPopUpTrigger=true
#browserPopUpPage=index.html
browserPopUpPage=Status.html
browserPopUpApplication=netscape

# the proxy saves it's own seed information. It is positive for the network if
# the seed does not change it's configuration often (or not at all).
# The reason for that is that the seed hash is the target for the
# distributed hash table distribution function.
# The following file will contain the saved seed:
yacyOwnSeedFile=DATA/YACYDB/mySeed.txt
yacyDB=DATA/YACYDB

# index sharing attributes
# by default, sharing is on. If you want to use the proxy only for
# local indexing, you may switch this off
allowDistributeIndex=true
allowReceiveIndex=true

# the frequency is the number of links per minute, that the peer allowes
# _every_ other peer to send to this peer
defaultWordReceiveFrequency=100
defaultLinkReceiveFrequency=30
# the default may be overridden for each peer individually, these
# settings are only available through the online interface

# prefetch parameters
# the prefetch depth assigns a specific depth to the prefetch mechanism
# prefetch of 0 means no prefetch; a prefetch of 1 means to prefetch all
# embedded url's, but since embedded image links are loaded by the browser
# this means that only embedded anchors are prefetched additionally
# a prefetch of 2 would result in loading of all images and anchor pages
# of all embedded anchors. Be careful with this value, since even a prefetch
# of 2 would result in hundreds of prefetched urls for each single proxy fill.
proxyPrefetchDepth=0
proxyStoreHTCache=true

# From the 'IndexCreate' menu point you can also define a crawling start point.
# The crawling works the same way as the prefetch, but it is possible to
# assign a different crawling depth.
# Be careful with this number. Consider a branching factor of average 20;
# A prefect-depth of 8 would index 25.600.000.000 pages, maybe the whole WWW.
crawlingDepth=2
localIndexing=true

# Filter for crawlinig; may be used to restrict a crawl to a specific domain
# URL's are only indexed and further crawled if they match this filter
crawlingFilter=.*
crawlingQ=false
storeHTCache=false
storeTXCache=true

# default crawl profile entries
# if these entries are empty, then a new entry will be generated
defaultProxyProfile=
defaultRemoteProfile=

# peers may initiate remote crawling tasks.
# every peer may allow or disallow to be used as crawling-peer;
# you can also set a maximum crawl depth that can be requested or accepted
# order=parameters for requester; response=parameters for responder
# these values apply only for senior-senior - communication
# The delay value is number of seconds bewteen two separate orders
crawlOrder=true
crawlOrderDepth=0
crawlOrderDelay=8
crawlResponse=true
crawlResponseDepth=0
crawlResponseDelay=30

# indexing-exclusion - rules
# There rules are important to reduce the number of words that are indexed
# We distinguish three different sets of stop-words:
# static   - excludes all words given in the file yacy.stopwords from indexing,
# dynamic  - excludes all words from indexing which are listed by statistic rules,
# parental - excludes all words from indexing which had been indexed in the parent web page.
xsstopw=true
xdstopw=true
xpstopw=true


# performance-settings
# delay-times for permanent loops (milliseconds)
# the idlesleep is the pause that an proces sleeps if the last call to the
# process job was without execution of anything;
# the busysleep is the pause after a full job execution
20_dhtdistribution_idlesleep=20000
20_dhtdistribution_busysleep=5000
30_peerping_idlesleep=120000
30_peerping_busysleep=120000
40_peerseedcycle_idlesleep=1800000
40_peerseedcycle_busysleep=1200000
50_localcrawl_idlesleep=5000
50_localcrawl_busysleep=1000
60_globalcrawl_idlesleep=60000
60_globalcrawl_busysleep=5000
70_cachemanager_idlesleep=10000
70_cachemanager_busysleep=4000
80_dequeue_idlesleep=4000
80_dequeue_busysleep=1000
90_cleanup_idlesleep=300000
90_cleanup_busysleep=300000