removed preferred IPv4 in start options and added a new field IP6 in
peer seeds which will contain one or more IPv6 addresses. Now every peer
has one or more IP addresses assigned, even several IPv6 addresses are
possible. The peer-ping process must check all given and possible IP
addresses for a backping and return the one IP which was successful when
pinging the peer. The ping-ing peer must be able to recognize which of
the given IPs are available for outside access of the peer and store
this accordingly. If only one IPv6 address is available and no IPv4,
then the IPv6 is stored in the old IP field of the seed DNA.
Many methods in Seed.java are now marked as @deprecated because they had
been used for a single IP only. There is still a large construction site
left in YaCy now where all these deprecated methods must be replaced
with new method calls. The 'extra'-IPs, used by cluster assignment had
been removed since that can be replaced with IPv6 usage in p2p clusters.
All clusters must now use IPv6 if they want an intranet-routing.
found a situation after crash (reboot) with existing running semaphore but YaCy not running.
Ping generated exception which finally deleted the conf file (during pre-read procedure)
- change to ping (catch exception solved it)
- additionally removed delete yacy.conf file (if needed we need to make a backup)
besides adjustments in code it makes the servlet settings in web.xml significant.
This applies to solr, gsa and proxy servlet. There is no longer a default setup in code during init (as jetty 9 checks for double definition).
- move htroot exist check from old httpdfilehandler to startup, remove from filehandler and legacy proxyhandler
- use SwitchboardConstant.htroot where appropriate
- useful for remote installation to set any config file property
- multipe parameter can be set at once, on Windows enclose parameter in doublequotes
- special handling "adminAccount=adminuser:adminpwd" sets adminusername and md5 encoded admin-pwd
- adjusted windows startbatch to allow command line parameter handling
- remove not needed classpath calculation from startYACY_debug.bat
introduced, it was also used for search facets. The generic search
facets are now deduced from generic solr fields which makes jena as tool
for facet semantics superfluous.
request into a separate thread and ignores the furthure result of a
request if that does not answer within the requested time-out. This is a
try to solve a problem with the peer-ping, which hangs whenever a peer
appears to be dead or blocked.
- the admin user name can be configured, in apiExec calls the default "admin" username is used.
TODO: the bin/apicall.sh script should likely take that into account.
via Jetty IPAccessHandler to allow only configured IP's to access.
Handler is only loaded if a restriction is configured.
Since IPAcessHandler (Jetty 8) does not support IPv6 system property java.net.preferIPv4Stack=true
Testing showed system.setProperty seems to be sensitive to point of calling (earliest possible time seems to be best = early in yacy.main).
Moved the "isrunning..." just open browser check also to the new routine to preread the yacy.config only once.
- userDB is not sync'ed with Jetty credentials as of now only the std. admin account can login
switched initial browser open with ssl active back to std. http port
!!! attention !!! to make sure YaCy can start, https will be disabled if port 8443 is used
- added ping test for above to migration
- as of now port for https is hardcoded to default 8443
- if not urgend required I'd leave it this way (it's standard) to use different ports for http and https
- post https port on ConfigBasic.html (if active)
- introduce a YaCyHttp interface to modulize/separate http server
- adjust the Jetty version specific implementation part (in package net.yacy.http)
- putting the version specific code in classes starting with Jetty8xxxx
- moved existing Jetty9xxx implementation into a test class (to keep the code)
- adjust build to the changed jars
- make use of the introduced YaCyHttpServer interface in related htroot servlets
- adjust other test cases/classes
ServerSideIncludes and servlet return values need further work (for working jetty integration)
- TODO: added nasty quickfix to allow SSI - needs further work
- TODO: YaCy servlet return values/parameters are not handled
in intranets and the internet can now choose to appear as Googlebot.
This is an essential necessity to be able to compete in the field of
commercial search appliances, since most web pages are these days
optimized only for Google and no other search platform any more. All
commercial search engine providers have a built-in fake-Google User
Agent to be able to get the same search index as Google can do. Without
the resistance against obeying to robots.txt in this case, no
competition is possible any more. YaCy will always obey the robots.txt
when it is used for crawling the web in a peer-to-peer network, but to
establish a Search Appliance (like a Google Search Appliance, GSA) it is
necessary to be able to behave exactly like a Google crawler.
With this change, you will be able to switch the user agent when portal
or intranet mode is selected on per-crawl-start basis. Every crawl start
can have a different user agent.
jdk-based logger tend to block
at java.util.logging.Logger.log(Logger.java:476) in concurrent
environments. This makes logging a main performance issue. To overcome
this problem, this is a add-on to jdk logging to put log entries on a
concurrent message queue and log the messages one by one using a
separate process.
- FTPClient uses the concurrent logging instead of the log4j logger
- move setting of system property solr.directoryFactory=solr.MMapDirectoryFactory to solrcore.properties
- add check of os.arch for 64bit system, if it fails use default/solrcore.x86.properties (if exists) as solrcore.properties
reason: on 32bit MMapDirectoryFactory may fail with.....
Caused by: java.io.IOException: Map failed
at sun.nio.ch.FileChannelImpl.map(FileChannelImpl.java:849)
at org.apache.lucene.store.MMapDirectory.map(MMapDirectory.java:283)
- to prevent following log if YaCy was previously not properly shutdown
E ... STARTUP WARNING: the file C:\src\git\yacy-rc1\DATA\yacy.running exists, this usually means that a YaCy instance is still running
E ... STARTUP FATAL ERROR: java.util.concurrent.TimeoutException
java.util.concurrent.ExecutionException: java.util.concurrent.TimeoutException
at net.yacy.cora.protocol.TimeoutRequest.call(TimeoutRequest.java:91)
at net.yacy.cora.protocol.TimeoutRequest.ping(TimeoutRequest.java:112)
at net.yacy.yacy.startup(yacy.java:200)
at net.yacy.yacy.main(yacy.java:638)
Caused by: java.util.concurrent.TimeoutException
- adjust Netbeans path (to solr4.1.jars)
YaCy; YaCy is still running and the user additionally expect that
another doubleclick on the YaCy icon simply opens the search windows
(again) I decided to add a function that complies to the expectation to
the user: simply open the browser pop-up page again if the user starts
YaCy while YaCy is still running.
- start more processes
- remove superfluous host name resolution
- better/more flexible subnet ip range calculation
- prefer ipv4 makes better usable ip pre-settings in servlet
- extended servlet by new subnet /20 - option
- redesign of scanner start process in servlet (generalization)
or will be superfluous or subject of complete redesign after the
migration to solr. Removing these things now will make the transition to
solr more simple.
later
- added abstract add, delete, get methods in the triplestore
- added generation of triples after auto-annotation
- migrated all MultiProtocolURI objects to DigestURI in the parser since
the url hash is needed as subject value in the triples in the triple
store
- config string for chinese
- do not copy the language file to DATA/LOCALE any more (and do not use
them there, this is really confusing for new translators)
You can toggle between previous (standard) and new (generation) strategy at PerformanceMemory_p.html.
The generation memory strategy is implemented with the objective of running more robust
but with the cost of early stopping some tasks (eg. dht) while running low on memory.
This new strategy does respect the generational way a heap is organized on most used jvms.
These changes run fine on my 3 peers for weeks now, but as I'm human, I may fail.
Please be carefull using generation memory strategy and report errors by naming
OS, jvm and java_args.
git-svn-id: https://svn.berlios.de/svnroot/repos/yacy/trunk@7886 6c8d7289-2bf4-0310-a012-ef5d649a1542
I wondered getting Total-ram > Max-ram and MemoryControl.available() < 0
MemoryControl.available() < 0 causes some errors where its value is used for dimension of buffers for eg.
git-svn-id: https://svn.berlios.de/svnroot/repos/yacy/trunk@7852 6c8d7289-2bf4-0310-a012-ef5d649a1542
- added new Array class that contains an abstraction of the java Arrrays class which replaces the home-brew quicksort algorithm.
- the new class is about four times slower than the old one, but it works correct (the old one had errors)
- fixed a synchronization problem
git-svn-id: https://svn.berlios.de/svnroot/repos/yacy/trunk@7842 6c8d7289-2bf4-0310-a012-ef5d649a1542
used a ASCII String <-> byte[] conversion wherever possible. Many Strings in YaCy are hashes which are pure ASCII (base64 hashes).
The new ASCII String <-> byte[] conversion method have less computation overhead than the UTF8 conversion.
git-svn-id: https://svn.berlios.de/svnroot/repos/yacy/trunk@7746 6c8d7289-2bf4-0310-a012-ef5d649a1542
- many speed/performance hacks
- added solr charding and new charding web interface
- added option to switch off the yacy index when using solr
- added new fail-url categories which are used to make a distinction which fail-urls to be sent to solr
- refactoring/renaming of some method names to distinguish host/url hashes better
- a large number of bug/npe fixes
git-svn-id: https://svn.berlios.de/svnroot/repos/yacy/trunk@7738 6c8d7289-2bf4-0310-a012-ef5d649a1542
- extended metadata information in index with geolocalisation
- added display of location in yacydoc and ViewFile
git-svn-id: https://svn.berlios.de/svnroot/repos/yacy/trunk@7629 6c8d7289-2bf4-0310-a012-ef5d649a1542
- new concurrent score map using atom operation from java concurrency classes
- redesigned difference beween StaticScore and Dynamic Score into ScoreMap and ReversibleScoreMap allowed that many classes can now use simple ScoreMap Objects which can be used better in concurrent environments using the ConcurrentScoreMap
- switched from DynamicScore to ConcurrentScoreMap usage wherever possible
git-svn-id: https://svn.berlios.de/svnroot/repos/yacy/trunk@7586 6c8d7289-2bf4-0310-a012-ef5d649a1542
Michael Peter Christen