Similar to how we specify the OS's we build Qt for, specify which OS's
we will build qrencode for (a qt dependency). This commit alone doesn't
change anything, but when we start supporting other OS's, i.e #23948,
where we wont support qt (or at least initially), it'll skip building
the qrencode package, which would be unused.
The sys/sdt.h header is required to build Bitcoin Core with Userspace
Statically Defined Tracing support. Systemtap version 4.5 (May 2021)
is used as the most recent version 4.6 (Nov 2021) fails to build.
See e.g. https://sourceware.org/git/?p=systemtap.git;a=commit;h=1d3653936fc1fd13135a723a27e6c7e959793ad0
As Systemtap itself is not needed, the build steps (configure and
make) are skipped. We require fewer build dependecies and don't
waste time building depends we don't end up using. However, the
configure step would normally processes sys/sdt-config.h.in. The
resulting sdt-config.h defines _SDT_ASM_SECTION_AUTOGROUP_SUPPORT
(either 0 or 1 to indicate whether the assembler supports "?" in
.pushsection directives). For now, we assume all currently used
assemblers supports this feature and remove the check from the
sys/sdt.h header file in a patch.
Co-authored-by: Michael Ford <fanquake@gmail.com>
8494dcae0e Replace $(AT) with .SILENCE. (Dmitry Goncharov)
Pull request description:
This reduces the amount of syntax noise in the makefiles.
Setting V=1 still enables verbose logging.
The only noticeable difference in behavior is that, unless V=1 is specified, make won't print its own messages like
make: Nothing to be done for 'all', make: 'all' is up to date, or touch <file>, if -t is specified.
ACKs for top commit:
laanwj:
Tested ACK 8494dcae0e
Tree-SHA512: 66b9111229995aa54a9e87f4571648727d89b8529caec651063cdfe5c00a64341371b648701d192b2334df0614617a00c28eaa56c7f08ee9c00127cada0293ab
.PHONY does not take patterns (such as print-%) as prerequisites.
Have print-% depend on FORCE and mark FORCE as phony.
$ # on master
$ make print-host
host=x86_64-pc-linux-gnu
$ touch print-host
$ make print-host
make: 'print-host' is up to date.
$
$ git co mark_print_as_phony
Switched to branch 'mark_print_as_phony'
$ make print-host
host=x86_64-pc-linux-gnu
$ touch FORCE
$ make print-host
host=x86_64-pc-linux-gnu
fa872c9af3 depends: Fix id_string invocations (Carl Dong)
Pull request description:
Closes: #21242
```
Reproduced from depends/Makefile comment:
When invoking a shell, GNU Make special-cases exit code 127 (command not
found) by not capturing the output but instead passing it through. This
is not done for any other exit code.
Therefore, we require a "|| true" to avoid this behaviour when in an
environment where the build_* or host_* may not exist yet.
```
ACKs for top commit:
laanwj:
Concept and light code review ACK fa872c9af3
Tree-SHA512: 9ce88381aec579d956572cf70c4f69dc5a3873f0d2af14a71cf24814192a89452b8280258bed8cca804e4bd2644db056d213ab733df46a10560a47079524d8ac
a5491882a0 build: fix configuring when building depends with NO_BDB=1 (fanquake)
Pull request description:
Currently, if you build depends using `NO_BDB=1` (only sqlite wallets), `./configure` will fail as it still tries to find bdb. i.e:
```bash
make -C depends/ NO_QT=1 NO_BDB=1 NO_UPNP=1 NO_ZMQ=1 NO_NATPMP=1 -j8
...
copying packages: native_b2 boost libevent sqlite
./autogen.sh
./configure --prefix=/home/ubuntu/bitcoin/depends/x86_64-pc-linux-gnu
...
checking for Berkeley DB C++ headers... default
configure: error: Found Berkeley DB other than 4.8, required for portable BDB wallets (--with-incompatible-bdb to ignore or --without-bdb to disable BDB wallet support)
```
This PR fixes the build such that you can build depends, opting out of bdb, without opting out of wallets entirely, and still configure successfully. I think I've tested across most potential configurations. i.e:
```bash
./configure (bdb and sqlite on system)
bdb & sqlite are both are available
./configure --without-bdb (bdb and sqlite on system)
only sqlite
./configure --without-sqlite (bdb and sqlite on system)
only bdb
./configure --disable-wallet (bdb and sqlite on system)
neither bdb or sqlite
depends NO_WALLET=1
./configure --prefix=/bitcoin/depends/x86_64-apple-darwin19.6.0
neither bdb or sqlite
depends NO_BDB=1
./configure --prefix=/bitcoin/depends/x86_64-apple-darwin19.6.0
only sqlite
depends NO_SQLITE=1
./configure --prefix=/bitcoin/depends/x86_64-apple-darwin19.6.0
only bdb
depends
./configure --prefix=/bitcoin/depends/x86_64-apple-darwin19.6.0
bdb and sqlite
```
ACKs for top commit:
laanwj:
Code review ACK a5491882a0
jarolrod:
ACK a5491882a0
Tree-SHA512: baf7d2543a401db0d846095415ff449c04ecfb4a74c734dc51e79453702f9051210daeef686970f11fcffd32cdfadbc58acd54f0706aceecfb3edb0ff17310d7
We now use a script named gen_id to generate the base build_id/host_id.
This solves 2 problems:
1. GNU Make special-casing exit code 127 (command not found) meant that
warnings about missing tools would propagate to the user's terminal
and broke our opportunistic build_id construction.
2. This change ensures that we don't have arbitrary characters in our
make variables that would be misinterpreted by Make.
See comments in depends/Makefile and depends/gen_id for more
information.
Currently, if you build depends using `NO_BDB=1` (only sqlite wallets),
./configure will fail as it still tries to find bdb. i.e:
```bash
checking for Berkeley DB C++ headers... default
configure: error: Found Berkeley DB other than 4.8, required for portable BDB wallets (--with-incompatible-bdb to ignore or --without-bdb to disable BDB wallet support)
```
This PR fixes the build such that you can build depends, opting out of
bdb without opting out of wallets entirely, and still configure
successfully.
5200929bfe depends: Include GUIX_ENVIRONMENT in id string (Carl Dong)
4c7d418588 depends: Improve id string robustness (Carl Dong)
b3bdff42b5 build: Proper quoting for var printing targets (Carl Dong)
Pull request description:
```
Environment variables and search paths can drastically effect the
operation of build tools.
Include these in our id string to mitigate against false cache hits.
```
Note to builders: This will invalidate all depends output caches in `BASE_CACHE`
ACKs for top commit:
laanwj:
re-ACK 5200929bfe
Tree-SHA512: e70c98da89cde90dc54bc3be89b925787cf94bbf246e27cc9345816b312073d78a02215448f731f21d8cf033c455234a2377ff1d66c00e1f3db69c9c9687d027
Environment variables and search paths can drastically effect the
operation of build tools.
Include these in our id string to mitigate against false cache hits.
This was missed in #20419, and the update before that, so just
make this un-versioned so that we don't have to worry about it.
This is fine, because it's just for downloading sources.
Instead of doing the awkward /bin path prepending at config.site
creation time, set darwin_{CC,CXX} in a way that fully determines the
program's path (clang/clang++) similar to how AC_PATH_{TOOL,PROG} would
do.
Also see the added comment block in depends/Makefile for more context on
determining $PATH for our config.site.
This should be caught by the differing clang --version outputs, but because we
haven't yet extracted our pinned clang, the system one is actually used for the
version check. That's not a problem because bumping our pinned clang will
cause a rebuild of everything anyway.
We want to supply well-known vars to ./configure scripts to do with as
they please. However, we do _not_ want to override these well-known vars
at make-time as certain build systems expect a self-mangled version of
these well-known vars.
For example, freetype and bdb will prepend `libtool --mode=compile' to
CC and CXX, which, if we override CC on the command line at make-time,
will break the build.
This reverts the changes made in merge commit
1b307613604883daea4913a65da30ae073c9dc4d:
This reverts commit b919efadff.
This reverts commit d54f64c6c7.
This reverts commit 787f40668d.
This reverts commit d630646662.
This reverts commit e6e44eedd5.
11113247c3 depends: Support for S390X targets (MarcoFalke)
989fd539d5 depends: Support for 64-bit POWER targets (Luke Dashjr)
Pull request description:
Failure before:
```
$ make -C depends HOST=powerpc64-linux-gnu
...
ERROR: Feature 'system-zlib' was enabled, but the pre-condition 'libs.zlib' failed.
ERROR: Feature 'xcb' was enabled, but the pre-condition 'libs.xcb' failed.
ERROR: Feature 'system-freetype' was enabled, but the pre-condition 'features.freetype && libs.freetype' failed.
ERROR: Feature 'fontconfig' was enabled, but the pre-condition '!config.win32 && !config.darwin && features.system-freetype && libs.fontconfig' failed.
make: *** [funcs.mk:254: /bitcoin/depends/work/build/powerpc64-linux-gnu/qt/5.9.8-95548079095/qtbase/.stamp_configured] Error 3
$ make -C depends HOST=s390x-linux-gnu
...
ERROR: Feature 'system-zlib' was enabled, but the pre-condition 'libs.zlib' failed.
ERROR: Feature 'xcb' was enabled, but the pre-condition 'libs.xcb' failed.
ERROR: Feature 'system-freetype' was enabled, but the pre-condition 'features.freetype && libs.freetype' failed.
ERROR: Feature 'fontconfig' was enabled, but the pre-condition '!config.win32 && !config.darwin && features.system-freetype && libs.fontconfig' failed.
make: *** [funcs.mk:254: /bitcoin/depends/work/build/s390x-linux-gnu/qt/5.9.8-79c6d6ca6ec/qtbase/.stamp_configured] Error 3
```
ACKs for top commit:
laanwj:
Code review ACK 11113247c3
dongcarl:
tested ACK 11113247c3
practicalswift:
ACK 11113247c3 -- diff looks correct
Tree-SHA512: f990101ced0ed579168bb25762c1296c9b512c597bab924013af41832670a69ed786c6ec9b654c95fe064187797880a66c575395bc102a914c1bdb323ca7538a
f9af3ced1c Android: add all arch support (Block Mechanic)
d419ca7e32 depends: export dynamic JNI symbols from static qtforandroid.a (Igor Cota)
ed30684d03 Qt: patch androidjnimain.cpp to make sure JNI is initialised when statically compiled (Igor Cota)
e4c319e8a1 builds: remove superfluous config_opts_aarch64_android (Igor Cota)
24ffef0c27 Patch libevent when building for Android (fix arc4random_addrandom) (Igor Cota)
f1e40b3e71 Update bitcoin_qt.m4 (BlockMechanic)
b4057d8261 Define TARGET_OS when host is android (Igor Cota)
80b475f159 Fix Android zlib cross compilation issue (https://stackoverflow.com/questions/21396988/zlib-build-not-configuring-properly-with-cross-compiler-ignores-ar) (Igor Cota)
45f8219015 Add full Android build example command and instructions on getting SDK/NDK (Igor Cota)
b68f2a68c2 Add config opts and patch for aarch64_android build of Qt (Igor Cota)
9c4cb0166e Add ranlib to android.mk hosts file (fix OSX Android NDK build) (Igor Cota)
c2a749c9c1 Add example Android host-platform-triplet and options (Igor Cota)
0b0cff3c61 Add support for building Android dependencies (Igor Cota)
Pull request description:
This allows one to build the dependencies with the Android SDK and goes towards fixing #11844. It has been tested to work with:
`make HOST=aarch64-linux-android ANDROID_API_LEVEL=28 ANDROID_TOOLCHAIN_BIN=/home/user/Android/Sdk/ndk-bundle/toolchains/llvm/prebuilt/linux-x86_64/bin NO_QT=1 NO_WALLET=1`
ACKs for top commit:
Sjors:
ACK f9af3ce. I'm OK with merging and then improving later.
Tree-SHA512: cb805115ebe5c9e33db2bf3eab8628808fe3f50052053d8877d8b8e4406d6fea1ed9e5c4dff85d777fb99c81be6ffb9d95a0e6d32344e728e5e0da6c653e2ce7
fanquake