bitcoin/.travis.yml

# The test build matrix (stage: test) is constructed to test a wide range of
# configurations, rather than a single pass/fail. This helps to catch build
# failures and logic errors that present on platforms other than the ones the
# author has tested.
#
# Some builders use the dependency-generator in `./depends`, rather than using
# apt-get to install build dependencies. This guarantees that the tester is
# using the same versions as Gitian, so the build results are nearly identical
# to what would be found in a final release.
#
# In order to avoid rebuilding all dependencies for each build, the binaries
# are cached and re-used when possible. Changes in the dependency-generator
# will trigger cache-invalidation and rebuilds as necessary.
#
# These caches can be manually removed if necessary. This is one of the very
# few manual operations that is possible with Travis, and it can be done by a
# Bitcoin Core GitHub member via the Travis web interface [0].
#
# Travis CI uploads the cache after the script phase of the build [1].
# However, the build is terminated without saving the cache if it takes over
# 50 minutes [2]. Thus, if we spent too much time in early build stages, fail
# with an error and save the cache.
#
# [0] https://travis-ci.org/bitcoin/bitcoin/caches
# [1] https://docs.travis-ci.com/user/caching/#build-phases
# [2] https://docs.travis-ci.com/user/customizing-the-build#build-timeouts

version: ~> 1.0

dist: xenial
os: linux
language: minimal
arch: amd64
cache:
  ccache: true
  directories:
    - $TRAVIS_BUILD_DIR/depends/built
    - $TRAVIS_BUILD_DIR/depends/sdk-sources
    - $TRAVIS_BUILD_DIR/ci/scratch/.ccache
    - $TRAVIS_BUILD_DIR/releases/$HOST
before_cache:
  - if [ "${TRAVIS_OS_NAME}" = "osx" ]; then brew cleanup; fi
stages:
  - lint
  - test
env:
  global:
    - CI_RETRY_EXE="travis_retry"
    - CI_WAIT="while sleep 500; do echo .; done"
    - CACHE_ERR_MSG="Error! Initial build successful, but not enough time remains to run later build stages and tests. See https://docs.travis-ci.com/user/customizing-the-build#build-timeouts . Please manually re-run this job by using the travis restart button. The next run should not time out because the build cache has been saved."
before_install:
  - set -o errexit; source ./ci/test/00_setup_env.sh
  - set -o errexit; source ./ci/test/03_before_install.sh
install:
  - set -o errexit; source ./ci/test/04_install.sh
before_script:
  - set -o errexit; source ./ci/test/05_before_script.sh
script:
  - export CONTINUE=1
  - if [ $SECONDS -gt 1200 ]; then export CONTINUE=0; fi  # Likely the depends build took very long
  - if [ $TRAVIS_REPO_SLUG = "bitcoin/bitcoin" ]; then export CONTINUE=1; fi  # Whitelisted repo (90 minutes build time)
  - if [ $CONTINUE = "1" ]; then set -o errexit; source ./ci/test/06_script_a.sh; else set +o errexit; echo "$CACHE_ERR_MSG"; false; fi
  - if [ $SECONDS -gt 2000 ]; then export CONTINUE=0; fi  # Likely the build took very long; The tests take about 1000s, so we should abort if we have less than 50*60-1000=2000s left
  - if [ $TRAVIS_REPO_SLUG = "bitcoin/bitcoin" ]; then export CONTINUE=1; fi  # Whitelisted repo (90 minutes build time)
  - if [ $CONTINUE = "1" ]; then set -o errexit; source ./ci/test/06_script_b.sh; else set +o errexit; echo "$CACHE_ERR_MSG"; false; fi
after_script:
  - echo $TRAVIS_COMMIT_RANGE
jobs:
  include:

    - stage: lint
      name: 'lint'
      env:
      cache: pip
      language: python
      python: '3.5' # Oldest supported version according to doc/dependencies.md
      install:
        - set -o errexit; source ./ci/lint/04_install.sh
      before_script:
        - set -o errexit; source ./ci/lint/05_before_script.sh
      script:
        - set -o errexit; source ./ci/lint/06_script.sh

    - stage: test
      name: 'ARM  [GOAL: install]  [buster]  [unit tests, functional tests]'
      arch: arm64  # Can disable QEMU_USER_CMD and run the tests natively without qemu
      env: >-
        FILE_ENV="./ci/test/00_setup_env_arm.sh"
        QEMU_USER_CMD=""

# s390 build was disabled temporarily because of disk space issues on the Travis VM
#
#    - stage: test
#      name: 'S390x  [GOAL: install]  [buster]  [unit tests, functional tests]'
#      arch: s390x  # Can disable QEMU_USER_CMD and run the tests natively without qemu
#      env: >-
#        FILE_ENV="./ci/test/00_setup_env_s390x.sh"
#        QEMU_USER_CMD=""

    - stage: test
      name: 'Win64  [GOAL: deploy]  [unit tests, no gui, no functional tests]'
      env: >-
        FILE_ENV="./ci/test/00_setup_env_win64.sh"

    - stage: test
      name: '32-bit + dash  [GOAL: install]  [CentOS 7]  [gui]'
      env: >-
        FILE_ENV="./ci/test/00_setup_env_i686_centos.sh"

    - stage: test
      name: 'x86_64 Linux  [GOAL: install]  [bionic]  [C++17, previous releases, uses qt5 dev package and some depends packages] [unsigned char]'
      env: >-
        FILE_ENV="./ci/test/00_setup_env_native_qt5.sh"

    - stage: test
      name: 'x86_64 Linux  [GOAL: install]  [xenial]  [no depends, only system libs, sanitizers: thread (TSan), no wallet]'
      env: >-
        FILE_ENV="./ci/test/00_setup_env_native_tsan.sh"
        TEST_RUNNER_EXTRA="--exclude feature_block"  # Not enough memory on travis machines

    - stage: test
      name: 'x86_64 Linux  [GOAL: install]  [bionic]  [no depends, only system libs, sanitizers: address/leak (ASan + LSan) + undefined (UBSan) + integer]'
      env: >-
        FILE_ENV="./ci/test/00_setup_env_native_asan.sh"

    - stage: test
      name: 'x86_64 Linux  [GOAL: install]  [focal]  [no depends, only system libs, sanitizers: fuzzer,address,undefined]'
      env: >-
        FILE_ENV="./ci/test/00_setup_env_native_fuzz.sh"

    - stage: test
      name: 'x86_64 Linux  [GOAL: install]  [bionic]  [no wallet]'
      env: >-
        FILE_ENV="./ci/test/00_setup_env_native_nowallet.sh"

    - stage: test
      name: 'macOS 10.12  [GOAL: deploy] [no functional tests]'
      env: >-
        FILE_ENV="./ci/test/00_setup_env_mac.sh"

    - stage: test
      name: 'macOS 10.14 native [GOAL: install] [GUI] [no depends]'
      os: osx
      # Use the most recent version:
      # Xcode 11.3.1, macOS 10.14, SDK 10.15
      # https://docs.travis-ci.com/user/reference/osx/#macos-version
      osx_image: xcode11.3
      cache:
        directories:
          - $TRAVIS_BUILD_DIR/ci/scratch/.ccache
          - $TRAVIS_BUILD_DIR/releases/$HOST
          - $HOME/Library/Caches/Homebrew
          - /usr/local/Homebrew
      addons:
        homebrew:
          packages:
          - libtool
          - berkeley-db4
          - boost
          - miniupnpc
          - qt
          - qrencode
          - python3
          - ccache
          - zeromq
      env: >-
        DANGER_RUN_CI_ON_HOST=true
        CI_USE_APT_INSTALL=no
        FILE_ENV="./ci/test/00_setup_env_mac_host.sh"