#!/bin/bash -e
#
# Copyright (c) 2009-2014 Robert Nelson <robertcnelson@gmail.com>
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
# Latest can be found at:
# http://github.com/RobertCNelson/netinstall/blob/master/mk_mmc.sh

#REQUIREMENTS:
#uEnv.txt bootscript support

MIRROR="https://rcn-ee.net/deb"

BOOT_LABEL="BOOT"
PARTITION_PREFIX=""

unset USE_BETA_BOOTLOADER
unset USE_LOCAL_BOOT
unset LOCAL_BOOTLOADER
unset ADDON

unset FIRMWARE
unset BETA_KERNEL
unset EXPERIMENTAL_KERNEL
unset KERNEL_DEB

GIT_VERSION=$(git rev-parse --short HEAD)

DIST=wheezy
ARCH=armhf
DISTARCH="${DIST}-${ARCH}"

DIR="$PWD"
TEMPDIR=$(mktemp -d)

is_element_of () {
	testelt=$1
	for validelt in $2 ; do
		[ $testelt = $validelt ] && return 0
	done
	return 1
}

check_root () {
	if ! [ $(id -u) = 0 ] ; then
		echo "$0 must be run as sudo user or root"
		exit 1
	fi
}

check_for_command () {
	if ! which "$1" > /dev/null ; then
		echo -n "You're missing command $1"
		NEEDS_COMMAND=1
		if [ -n "$2" ] ; then
			echo -n " (consider installing package $2)"
		fi
		echo
	fi
}

detect_software () {
	unset NEEDS_COMMAND

	check_for_command mkfs.vfat dosfstools
	check_for_command wget wget
	check_for_command dpkg dpkg
	check_for_command partprobe parted
	check_for_command patch patch
	check_for_command mkimage u-boot-tools

	if [ "${NEEDS_COMMAND}" ] ; then
		echo ""
		echo "Your system is missing some dependencies"
		echo "Ubuntu/Debian: sudo apt-get install wget dosfstools u-boot-tools parted"
		echo "Fedora: as root: yum install wget dosfstools dpkg patch uboot-tools parted"
		echo "Gentoo: emerge wget dosfstools dpkg u-boot-tools parted"
		echo ""
		exit
	fi

	unset test_sfdisk
	test_sfdisk=$(LC_ALL=C sfdisk -v 2>/dev/null | grep 2.17.2 | awk '{print $1}')
	if [ "x${test_sdfdisk}" = "xsfdisk" ] ; then
		echo ""
		echo "Detected known broken sfdisk:"
		echo "See: https://github.com/RobertCNelson/netinstall/issues/20"
		echo ""
		exit
	fi
}

local_bootloader () {
	echo ""
	echo "Using Locally Stored Device Bootloader"
	echo "-----------------------------"
	mkdir -p ${TEMPDIR}/dl/

	if [ "${spl_name}" ] ; then
		cp ${LOCAL_SPL} ${TEMPDIR}/dl/
		SPL=${LOCAL_SPL##*/}
		echo "SPL Bootloader: ${SPL}"
	fi

	if [ "${boot_name}" ] ; then
		cp ${LOCAL_BOOTLOADER} ${TEMPDIR}/dl/
		UBOOT=${LOCAL_BOOTLOADER##*/}
		echo "UBOOT Bootloader: ${UBOOT}"
	fi
}

dl_bootloader () {
	echo ""
	echo "Downloading Device's Bootloader"
	echo "-----------------------------"
	minimal_boot="1"

	mkdir -p ${TEMPDIR}/dl/${DISTARCH}
	mkdir -p "${DIR}/dl/${DISTARCH}"

	wget --no-verbose --directory-prefix="${TEMPDIR}/dl/" ${conf_bl_http}/${conf_bl_listfile}

	if [ ! -f ${TEMPDIR}/dl/${conf_bl_listfile} ] ; then
		echo "error: can't connect to rcn-ee.net, retry in a few minutes..."
		exit
	fi

	boot_version=$(cat ${TEMPDIR}/dl/${conf_bl_listfile} | grep "VERSION:" | awk -F":" '{print $2}')
	if [ "x${boot_version}" != "x${minimal_boot}" ] ; then
		echo "Error: This script is out of date and unsupported..."
		echo "Please Visit: https://github.com/RobertCNelson to find updates..."
		exit
	fi

	if [ "${USE_BETA_BOOTLOADER}" ] ; then
		ABI="ABX2"
	else
		ABI="ABI2"
	fi

	if [ "${spl_name}" ] ; then
		SPL=$(cat ${TEMPDIR}/dl/${conf_bl_listfile} | grep "${ABI}:${conf_board}:SPL" | awk '{print $2}')
		wget --no-verbose --directory-prefix="${TEMPDIR}/dl/" ${SPL}
		SPL=${SPL##*/}
		echo "SPL Bootloader: ${SPL}"
	else
		unset SPL
	fi

	if [ "${boot_name}" ] ; then
		UBOOT=$(cat ${TEMPDIR}/dl/${conf_bl_listfile} | grep "${ABI}:${conf_board}:BOOT" | awk '{print $2}')
		wget --directory-prefix="${TEMPDIR}/dl/" ${UBOOT}
		UBOOT=${UBOOT##*/}
		echo "UBOOT Bootloader: ${UBOOT}"
	else
		unset UBOOT
	fi
}

dl_kernel_image () {
	echo ""
	echo "Downloading Device's Kernel Image"
	echo "-----------------------------"

	if [ "${BETA_KERNEL}" ] ; then
		kernel_repo="TESTING"
	fi

	if [ "${EXPERIMENTAL_KERNEL}" ] ; then
		kernel_repo="EXPERIMENTAL"
	fi

	if [ ! "${KERNEL_DEB}" ] ; then
		wget --no-verbose --directory-prefix=${TEMPDIR}/dl/ ${MIRROR}/${DISTARCH}/LATEST-${kernel_subarch}

		FTP_DIR=$(cat ${TEMPDIR}/dl/LATEST-${kernel_subarch} | grep "ABI:1 ${kernel_repo}" | awk '{print $3}')

		FTP_DIR=$(echo ${FTP_DIR} | awk -F'/' '{print $6}')

		KERNEL=$(echo ${FTP_DIR} | sed 's/v//')
		uname_r="${KERNEL}"

		wget --no-verbose --directory-prefix=${TEMPDIR}/dl/ ${MIRROR}/${DISTARCH}/${FTP_DIR}/
		ACTUAL_DEB_FILE=$(cat ${TEMPDIR}/dl/index.html | grep linux-image)
		ACTUAL_DEB_FILE=$(echo ${ACTUAL_DEB_FILE} | awk -F ".deb" '{print $1}')
		ACTUAL_DEB_FILE=${ACTUAL_DEB_FILE##*linux-image-}
		ACTUAL_DEB_FILE="linux-image-${ACTUAL_DEB_FILE}.deb"

		wget -c --directory-prefix="${DIR}/dl/${DISTARCH}" ${MIRROR}/${DISTARCH}/v${KERNEL}/${ACTUAL_DEB_FILE}

	else

		KERNEL=${external_deb_file}
		#Remove all "\" from file name.
		ACTUAL_DEB_FILE=$(echo ${external_deb_file} | sed 's!.*/!!' | grep linux-image)
		if [ -f "${DIR}/dl/${DISTARCH}/${ACTUAL_DEB_FILE}" ] ; then
			rm -rf "${DIR}/dl/${DISTARCH}/${ACTUAL_DEB_FILE}" || true
		fi
		cp -v ${external_deb_file} "${DIR}/dl/${DISTARCH}/"

	fi
	echo "Using Kernel: ${ACTUAL_DEB_FILE}"
}

remove_uboot_wrapper () {
	echo "Note: NetInstall has u-boot header, removing..."
	echo "-----------------------------"
	dd if="${DIR}/dl/${DISTARCH}/${NETINSTALL}" bs=64 skip=1 of="${DIR}/dl/${DISTARCH}/initrd.gz"
	echo "-----------------------------"
	NETINSTALL="initrd.gz"
	unset UBOOTWRAPPER
}

actually_dl_netinstall () {
	wget --directory-prefix="${DIR}/dl/${DISTARCH}" ${HTTP_IMAGE}/${DIST}/main/installer-${ARCH}/${NETIMAGE}/images/${BASE_IMAGE}/${NETINSTALL}
	MD5SUM=$(md5sum "${DIR}/dl/${DISTARCH}/${NETINSTALL}" | awk '{print $1}')
	if [ "${UBOOTWRAPPER}" ] ; then
		remove_uboot_wrapper
	fi
}

check_dl_netinstall () {
	MD5SUM=$(md5sum "${DIR}/dl/${DISTARCH}/${NETINSTALL}" | awk '{print $1}')
	if [ "x${TEST_MD5SUM}" != "x${MD5SUM}" ] ; then
		echo "Note: NetInstall md5sum has changed: ${MD5SUM}"
		echo "-----------------------------"
		rm -f "${DIR}/dl/${DISTARCH}/${NETINSTALL}" || true
		actually_dl_netinstall
	else
		if [ "${UBOOTWRAPPER}" ] ; then
			remove_uboot_wrapper
		fi
	fi
}

dl_netinstall_image () {
	echo ""
	echo "Downloading NetInstall Image"
	echo "-----------------------------"

	##FIXME: "network-console" support...
	debian_boot="netboot"
	. "${DIR}"/lib/distro.conf

	if [ -f "${DIR}/dl/${DISTARCH}/${NETINSTALL}" ] ; then
		check_dl_netinstall
	else
		actually_dl_netinstall
	 fi
	echo "md5sum of NetInstall: ${MD5SUM}"
}

boot_uenv_txt_template () {
	#Start with a blank state:
	echo "#Normal Boot" > ${TEMPDIR}/bootscripts/normal.cmd
	echo "#Debian Installer only Boot" > ${TEMPDIR}/bootscripts/netinstall.cmd

	if [ ! "${uboot_fdt_auto_detection}" ] ; then
		cat >> ${TEMPDIR}/bootscripts/normal.cmd <<-__EOF__
			fdtfile=${conf_fdtfile}

		__EOF__

		cat >> ${TEMPDIR}/bootscripts/netinstall.cmd <<-__EOF__
			fdtfile=${conf_fdtfile}

		__EOF__
	fi

	if [ "${drm_device_identifier}" ] ; then
		cat >> ${TEMPDIR}/bootscripts/normal.cmd <<-__EOF__
			##Video: [ls /sys/class/drm/]
			##Docs: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/fb/modedb.txt
			##Uncomment to override:
			#kms_force_mode=video=${drm_device_identifier}:1024x768@60e

		__EOF__

		cat >> ${TEMPDIR}/bootscripts/netinstall.cmd <<-__EOF__
			##Video: [ls /sys/class/drm/]
			##Docs: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/fb/modedb.txt
			##Uncomment to override:
			#kms_force_mode=video=${drm_device_identifier}:1024x768@60e

		__EOF__
	else
		cat >> ${TEMPDIR}/bootscripts/normal.cmd <<-__EOF__
			##Video: [ls /sys/class/drm/]
			##Docs: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/fb/modedb.txt
			##Uncomment to override:
			#kms_force_mode=video=HDMI-A-1:1024x768@60e

		__EOF__

		cat >> ${TEMPDIR}/bootscripts/netinstall.cmd <<-__EOF__
			##Video: [ls /sys/class/drm/]
			##Docs: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/fb/modedb.txt
			##Uncomment to override:
			#kms_force_mode=video=HDMI-A-1:1024x768@60e

		__EOF__
	fi

	if [ "x${drm_read_edid_broken}" = "xenable" ] ; then
		sed -i -e 's:#kms_force_mode:kms_force_mode:g' ${TEMPDIR}/bootscripts/normal.cmd
		sed -i -e 's:#kms_force_mode:kms_force_mode:g' ${TEMPDIR}/bootscripts/netinstall.cmd
	fi

	cat >> ${TEMPDIR}/bootscripts/normal.cmd <<-__EOF__
		kernel_file=${conf_normal_kernel_file}
		initrd_file=${conf_normal_initrd_file}

		console=SERIAL_CONSOLE

		mmcroot=FINAL_PART ro
		mmcrootfstype=FINAL_FSTYPE rootwait fixrtc

	__EOF__

	if [ ${conf_uboot_use_bootpart} ] ; then
		cat >> ${TEMPDIR}/bootscripts/normal.cmd <<-__EOF__
			loadkernel=${conf_fileload} mmc \${bootpart} ${conf_loadaddr} \${kernel_file}
			loadinitrd=${conf_fileload} mmc \${bootpart} ${conf_initrdaddr} \${initrd_file}; setenv initrd_size \${filesize}
			loadfdt=${conf_fileload} mmc \${bootpart} ${conf_fdtaddr} /dtbs/\${fdtfile}

		__EOF__
	else
		cat >> ${TEMPDIR}/bootscripts/normal.cmd <<-__EOF__
			loadkernel=${conf_fileload} mmc \${mmcdev}:\${mmcpart} ${conf_loadaddr} \${kernel_file}
			loadinitrd=${conf_fileload} mmc \${mmcdev}:\${mmcpart} ${conf_initrdaddr} \${initrd_file}; setenv initrd_size \${filesize}
			loadfdt=${conf_fileload} mmc \${mmcdev}:\${mmcpart} ${conf_fdtaddr} /dtbs/\${fdtfile}

		__EOF__
	fi

	cat >> ${TEMPDIR}/bootscripts/normal.cmd <<-__EOF__
		boot_fdt=run loadkernel; run loadinitrd; run loadfdt
	__EOF__

	cat >> ${TEMPDIR}/bootscripts/netinstall.cmd <<-__EOF__
		kernel_file=${conf_net_kernel_file}
		initrd_file=${conf_net_initrd_file}

		console=DICONSOLE

		mmcroot=/dev/ram0 rw

	__EOF__

	if [ ${conf_uboot_use_bootpart} ] ; then
		cat >> ${TEMPDIR}/bootscripts/netinstall.cmd <<-__EOF__
			loadkernel=${conf_fileload} mmc \${bootpart} ${conf_loadaddr} \${kernel_file}
			loadinitrd=${conf_fileload} mmc \${bootpart} ${conf_initrdaddr} \${initrd_file}; setenv initrd_size \${filesize}
			loadfdt=${conf_fileload} mmc \${bootpart} ${conf_fdtaddr} /dtbs/\${fdtfile}

		__EOF__

	else
		cat >> ${TEMPDIR}/bootscripts/netinstall.cmd <<-__EOF__
			loadkernel=${conf_fileload} mmc \${mmcdev}:\${mmcpart} ${conf_loadaddr} \${kernel_file}
			loadinitrd=${conf_fileload} mmc \${mmcdev}:\${mmcpart} ${conf_initrdaddr} \${initrd_file}; setenv initrd_size \${filesize}
			loadfdt=${conf_fileload} mmc \${mmcdev}:\${mmcpart} ${conf_fdtaddr} /dtbs/\${fdtfile}

		__EOF__
	fi

	if [ "${uboot_fdt_variable_name}" ] ; then
		sed -i -e 's:fdtfile:'$uboot_fdt_variable_name':g' ${TEMPDIR}/bootscripts/normal.cmd
		sed -i -e 's:fdtfile:'$uboot_fdt_variable_name':g' ${TEMPDIR}/bootscripts/netinstall.cmd
	fi

	cat >> ${TEMPDIR}/bootscripts/netinstall.cmd <<-__EOF__

		boot_fdt=run loadkernel; run loadinitrd; run loadfdt

	__EOF__

	if [ "x${di_serial_mode}" = "xenable" ] ; then

		cat >> ${TEMPDIR}/bootscripts/netinstall.cmd <<-__EOF__
			xyz_message=echo; echo Installer for [${DISTARCH}] is using the Serial Interface; echo;

		__EOF__
	else
		cat >> ${TEMPDIR}/bootscripts/netinstall.cmd <<-__EOF__
			xyz_message=echo; echo Installer for [${DISTARCH}] is using the Video Interface; echo Use [--serial-mode] to force Installing over the Serial Interface; echo;

		__EOF__
	fi

	case "${SYSTEM}" in
	video)
		cat >> ${TEMPDIR}/bootscripts/normal.cmd <<-__EOF__
			optargs=VIDEO_CONSOLE
			mmcargs=setenv bootargs console=\${console} \${optargs} \${kms_force_mode} root=\${mmcroot} rootfstype=\${mmcrootfstype}
		__EOF__

		cat >> ${TEMPDIR}/bootscripts/netinstall.cmd <<-__EOF__
			optargs=${conf_optargs}
			mmcargs=setenv bootargs console=\${console} \${optargs} \${kms_force_mode} root=\${mmcroot}
		__EOF__
		;;
	video-musb)
		cat >> ${TEMPDIR}/bootscripts/normal.cmd <<-__EOF__
			optargs=VIDEO_CONSOLE
			mmcargs=setenv bootargs console=\${console} \${optargs} \${kms_force_mode} root=\${mmcroot} rootfstype=\${mmcrootfstype} \${musb}
		__EOF__

		cat >> ${TEMPDIR}/bootscripts/netinstall.cmd <<-__EOF__
			optargs=${conf_optargs}
			mmcargs=setenv bootargs console=\${console} \${optargs} \${kms_force_mode} root=\${mmcroot} \${musb}
		__EOF__
		;;
	serial)
		cat >> ${TEMPDIR}/bootscripts/normal.cmd <<-__EOF__
			mmcargs=setenv bootargs console=\${console} \${optargs} \${kms_force_mode} root=\${mmcroot} rootfstype=\${mmcrootfstype}
		__EOF__

		cat >> ${TEMPDIR}/bootscripts/netinstall.cmd <<-__EOF__
			optargs=${conf_optargs}
			mmcargs=setenv bootargs console=\${console} \${optargs} \${kms_force_mode} root=\${mmcroot}
		__EOF__
		;;
	*)
		cat >> ${TEMPDIR}/bootscripts/normal.cmd <<-__EOF__
			mmcargs=setenv bootargs console=\${console} \${optargs} \${kms_force_mode} root=\${mmcroot} rootfstype=\${mmcrootfstype}
		__EOF__

		cat >> ${TEMPDIR}/bootscripts/netinstall.cmd <<-__EOF__
			optargs=${conf_optargs}
			mmcargs=setenv bootargs console=\${console} \${optargs} \${kms_force_mode} root=\${mmcroot}
		__EOF__
		;;
	esac

	cat >> ${TEMPDIR}/bootscripts/normal.cmd <<-__EOF__
		${conf_entrypt}=run boot_fdt; run mmcargs; ${conf_bootcmd} ${conf_loadaddr} ${conf_initrdaddr}:\${initrd_size} ${conf_fdtaddr}

	__EOF__

	cat >> ${TEMPDIR}/bootscripts/netinstall.cmd <<-__EOF__
		${conf_entrypt}=run xyz_message; run boot_fdt; run mmcargs; ${conf_bootcmd} ${conf_loadaddr} ${conf_initrdaddr}:\${initrd_size} ${conf_fdtaddr}

	__EOF__
}

tweak_boot_scripts () {
	unset KMS_OVERRIDE

	ALL="*.cmd"
	NET="netinstall.cmd"
	FINAL="normal.cmd"
	#Set the Serial Console
	sed -i -e 's:SERIAL_CONSOLE:'$SERIAL_CONSOLE':g' ${TEMPDIR}/bootscripts/${ALL}

	if [ "x${di_kms_mode}" = "xenable" ] && [ ! "x${di_serial_mode}" = "xenable" ] ; then
		#optargs=VIDEO_CONSOLE
		sed -i -e 's:VIDEO_CONSOLE:console=tty0:g' ${TEMPDIR}/bootscripts/${ALL}

		#Debian Installer console
		sed -i -e 's:DICONSOLE:tty0:g' ${TEMPDIR}/bootscripts/${NET}
	fi

	if [ "x${di_serial_mode}" = "xenable" ] ; then
		echo "NetInstall: Setting up to use Serial Port: [${SERIAL}]"
		#In pure serial mode, remove all traces of VIDEO
		sed -i -e 's:VIDEO_DISPLAY ::g' ${TEMPDIR}/bootscripts/${NET}

		#Debian Installer console
		sed -i -e 's:DICONSOLE:'$SERIAL_CONSOLE':g' ${TEMPDIR}/bootscripts/${NET}

		sed -i -e 's:kms_force_mode:#kms_force_mode:g' ${TEMPDIR}/bootscripts/${NET}

		#Unlike the debian-installer, normal boot will boot fine with the display enabled...
		if [ "x${di_kms_mode}" = "xenable" ] ; then
			#optargs=VIDEO_CONSOLE
			sed -i -e 's:VIDEO_CONSOLE:console=tty0:g' ${TEMPDIR}/bootscripts/${FINAL}
		fi
	fi
}

setup_bootscripts () {
	mkdir -p ${TEMPDIR}/bootscripts/
	boot_uenv_txt_template
	tweak_boot_scripts
}

extract_base_initrd () {
	echo "NetInstall: Extracting Base ${NETINSTALL}"
	cd ${TEMPDIR}/initrd-tree
	zcat "${DIR}/dl/${DISTARCH}/${NETINSTALL}" | cpio -i -d
	dpkg -x "${DIR}/dl/${DISTARCH}/${ACTUAL_DEB_FILE}" ${TEMPDIR}/initrd-tree
	cd "${DIR}/"
}

git_failure () {
	echo "Unable to pull/clone git tree"
	exit
}

dl_linux_firmware () {
	echo ""
	echo "Clone/Pulling linux-firmware.git"
	echo "-----------------------------"
	if [ ! -f "${DIR}/dl/linux-firmware/.git/config" ] ; then
		cd "${DIR}/dl/"
		if [ -d "${DIR}/dl/linux-firmware/" ] ; then
			rm -rf "${DIR}/dl/linux-firmware/" || true
		fi
		git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git || git_failure
	else
		cd "${DIR}/dl/linux-firmware"
		git pull || git_failure
	fi
	cd "${DIR}/"
}

dl_am335_firmware () {
	echo ""
	echo "Clone/Pulling am33x-cm3.git"
	echo "-----------------------------"
	if [ ! -f "${DIR}/dl/am33x-cm3/.git/config" ] ; then
		cd "${DIR}/dl/"
		if [ -d "${DIR}/dl/am33x-cm3/" ] ; then
			rm -rf "${DIR}/dl/am33x-cm3/" || true
		fi
		git clone git://arago-project.org/git/projects/am33x-cm3.git || git_failure
	else
		cd "${DIR}/dl/am33x-cm3"
		git pull || git_failure
	fi
	cd "${DIR}/"
}

dl_device_firmware () {
	mkdir -p ${TEMPDIR}/firmware/
	DL_WGET="wget --directory-prefix=${TEMPDIR}/firmware/"

	if [ "${need_am335x_firmware}" ] ; then
		dl_am335_firmware
		echo "-----------------------------"
		echo "Adding pre-built Firmware for am335x powermanagment"
		echo "SRC: http://arago-project.org/git/projects/?p=am33x-cm3.git;a=summary"
		echo "-----------------------------"
		cp -v "${DIR}/dl/am33x-cm3/bin/am335x-pm-firmware.bin" ${TEMPDIR}/firmware/
	fi

	if [ "${need_ti_connectivity_firmware}" ] ; then
		dl_linux_firmware
		echo "-----------------------------"
		echo "Adding Firmware for onboard WiFi/Bluetooth module"
		echo "-----------------------------"
		cp -r "${DIR}/dl/linux-firmware/ti-connectivity" ${TEMPDIR}/firmware/
	fi

	if [ "${need_wandboard_firmware}" ] ; then
		dl_linux_firmware
		echo "-----------------------------"
		echo "Adding Firmware for onboard WiFi/Bluetooth module"
		echo "-----------------------------"
		mkdir -p ${TEMPDIR}/firmware/brcm/
		if [ -f "${DIR}/dl/linux-firmware/brcm/brcmfmac4329-sdio.bin" ] ; then
			cp -v "${DIR}/dl/linux-firmware/brcm/brcmfmac4329-sdio.bin" ${TEMPDIR}/firmware/brcm/brcmfmac4329-sdio.bin
		fi
		if [ -f "${DIR}/dl/linux-firmware/brcm/brcmfmac4330-sdio.bin" ] ; then
			cp -v "${DIR}/dl/linux-firmware/brcm/brcmfmac4330-sdio.bin" ${TEMPDIR}/firmware/brcm/brcmfmac4330-sdio.bin
		fi
		wget_brcm="wget --no-verbose --directory-prefix=${TEMPDIR}/firmware/brcm/"
		http_brcm="https://raw.githubusercontent.com/Freescale/meta-fsl-arm-extra/master/recipes-bsp/broadcom-nvram-config/files/wandboard"

		${wget_brcm} ${http_brcm}/brcmfmac4329-sdio.txt
		${wget_brcm} ${http_brcm}/brcmfmac4330-sdio.txt
	fi

	if [ "${need_udoo_firmware}" ] ; then
		dl_linux_firmware
		echo "-----------------------------"
		echo "Adding Firmware for onboard WiFi/Bluetooth module"
		echo "-----------------------------"
		mkdir -p ${TEMPDIR}/firmware/

		if [ -f "${DIR}/dl/linux-firmware/rt2870.bin" ] ; then
			cp -v "${DIR}/dl/linux-firmware/rt2870.bin" ${TEMPDIR}/firmware/rt2870.bin
		fi
	fi

}

initrd_add_firmware () {
	DL_WGET="wget --directory-prefix=${TEMPDIR}/firmware/"
	echo ""
	echo "NetInstall: Adding Firmware"
	echo "-----------------------------"

	echo "Adding: Firmware from linux-firmware.git"
	echo "-----------------------------"
	dl_linux_firmware

	#Atheros:
	cp "${DIR}"/dl/linux-firmware/ath3k-1.fw ${TEMPDIR}/initrd-tree/lib/firmware/
	cp -r "${DIR}/dl/linux-firmware/ar3k/" ${TEMPDIR}/initrd-tree/lib/firmware/
	cp "${DIR}/dl/linux-firmware/carl9170-1.fw" ${TEMPDIR}/initrd-tree/lib/firmware/
	cp "${DIR}/dl/linux-firmware/htc_9271.fw" ${TEMPDIR}/initrd-tree/lib/firmware/

	#Libertas
	cp -r "${DIR}/dl/linux-firmware/libertas/" ${TEMPDIR}/initrd-tree/lib/firmware/
	#Ralink
	cp -r "${DIR}"/dl/linux-firmware/rt*.bin ${TEMPDIR}/initrd-tree/lib/firmware/
	#Realtek
	cp -r "${DIR}/dl/linux-firmware/rtlwifi/" ${TEMPDIR}/initrd-tree/lib/firmware/
	echo "-----------------------------"
}

initrd_cleanup () {
	echo "NetInstall: Removing Optional Stuff to Save RAM Space"
	echo "NetInstall: Original size [`du -ch ${TEMPDIR}/initrd-tree/ | grep total`]"
	#Cleanup some of the extra space..
	rm -f ${TEMPDIR}/initrd-tree/boot/*-${KERNEL} || true
	rm -rf ${TEMPDIR}/initrd-tree/lib/modules/${KERNEL}/kernel/drivers/media/ || true
	rm -rf ${TEMPDIR}/initrd-tree/lib/modules/${KERNEL}/kernel/drivers/usb/serial/ || true

	rm -rf ${TEMPDIR}/initrd-tree/lib/modules/${KERNEL}/kernel/drivers/net/bluetooth/ || true
	rm -rf ${TEMPDIR}/initrd-tree/lib/modules/${KERNEL}/kernel/drivers/net/irda/ || true
	rm -rf ${TEMPDIR}/initrd-tree/lib/modules/${KERNEL}/kernel/drivers/net/hamradio/ || true
	rm -rf ${TEMPDIR}/initrd-tree/lib/modules/${KERNEL}/kernel/drivers/net/can/ || true

	rm -rf ${TEMPDIR}/initrd-tree/lib/modules/${KERNEL}/kernel/net/irda/ || true
	rm -rf ${TEMPDIR}/initrd-tree/lib/modules/${KERNEL}/kernel/net/decnet/ || true

	rm -rf ${TEMPDIR}/initrd-tree/lib/modules/${KERNEL}/kernel/fs/ || true
	rm -rf ${TEMPDIR}/initrd-tree/lib/modules/${KERNEL}/kernel/sound/ || true
	rm -rf ${TEMPDIR}/initrd-tree/lib/modules/*-versatile/ || true
	rm -rf ${TEMPDIR}/initrd-tree/lib/modules/*-omap || true
	rm -rf ${TEMPDIR}/initrd-tree/lib/modules/*-mx5 || true
	rm -rf ${TEMPDIR}/initrd-tree/lib/modules/*-generic || true
	rm -rf ${TEMPDIR}/initrd-tree/lib/firmware/*-versatile/ || true
	#jessie:
	rm -rf ${TEMPDIR}/initrd-tree/lib/modules/*-armmp || true

	echo "NetInstall: Final size [`du -ch ${TEMPDIR}/initrd-tree/ | grep total`]"
}

neuter_flash_kernel () {
	cp -v "${DIR}/lib/flash_kernel/rcn-ee.db" ${TEMPDIR}/initrd-tree/etc/rcn-ee.db

	cat > ${TEMPDIR}/initrd-tree/usr/lib/post-base-installer.d/06neuter_flash_kernel <<-__EOF__
		#!/bin/sh -e
		#BusyBox: http://linux.die.net/man/1/busybox

		apt-install linux-base || true

		if [ -f /target/usr/share/flash-kernel/db/all.db ] ; then
			rm /target/usr/share/flash-kernel/db/all.db || true
		fi

		mkdir -p /target/usr/share/flash-kernel/db/ || true
		cp /etc/rcn-ee.db /target/usr/share/flash-kernel/db/rcn-ee.db

		if [ -f /target/etc/initramfs/post-update.d/flash-kernel ] ; then
			rm /target/etc/initramfs/post-update.d/flash-kernel || true
		fi

		if [ -f /target/etc/kernel/postinst.d/zz-flash-kernel ] ; then
			rm /target/etc/kernel/postinst.d/zz-flash-kernel || true
		fi

		if [ -f /target/etc/kernel/postrm.d/zz-flash-kernel ] ; then
			rm /target/etc/kernel/postrm.d/zz-flash-kernel || true
		fi

		mkdir -p /target/etc/dpkg/dpkg.cfg.d/ || true
		echo "# neuter flash-kernel" > /target/etc/dpkg/dpkg.cfg.d/01_noflash_kernel
		echo "path-exclude=/usr/share/flash-kernel/db/all.db" >> /target/etc/dpkg/dpkg.cfg.d/01_noflash_kernel
		echo "path-exclude=/etc/initramfs/post-update.d/flash-kernel" >> /target/etc/dpkg/dpkg.cfg.d/01_noflash_kernel
		echo "path-exclude=/etc/kernel/postinst.d/zz-flash-kernel" >> /target/etc/dpkg/dpkg.cfg.d/01_noflash_kernel
		echo "path-exclude=/etc/kernel/postrm.d/zz-flash-kernel" >> /target/etc/dpkg/dpkg.cfg.d/01_noflash_kernel
		echo ""  >> /target/etc/dpkg/dpkg.cfg.d/01_noflash_kernel

	__EOF__

	chmod a+x ${TEMPDIR}/initrd-tree/usr/lib/post-base-installer.d/06neuter_flash_kernel
}

finish_installing_device () {
	cat > ${TEMPDIR}/initrd-tree/usr/lib/finish-install.d/08rcn-ee-finish-installing-device <<-__EOF__
		#!/bin/sh -e
		cp /usr/bin/finish-install.sh /target/usr/bin/finish-install.sh
		chmod a+x /target/usr/bin/finish-install.sh

		mkdir -p /target/boot/uboot || true

		#Some devices may have mmc cards in both slots...
		unset got_boot_drive

		if [ ! \${got_boot_drive} ] ; then
			if [ -b /dev/mmcblk0p1 ] ; then
				mount /dev/mmcblk0p1 /target/boot/uboot
				if [ -f /target/boot/uboot/SOC.sh ] ; then
					got_boot_drive=1
					echo "/dev/mmcblk0" > /target/boot/uboot/bootdrive
				else
					umount /target/boot/uboot
				fi
			fi
		fi

		if [ ! \${got_boot_drive} ] ; then
			if [ -b /dev/mmcblk1p1 ] ; then
				mount /dev/mmcblk1p1 /target/boot/uboot
				if [ -f /target/boot/uboot/SOC.sh ] ; then
					got_boot_drive=1
					echo "/dev/mmcblk1" > /target/boot/uboot/bootdrive
				else
					umount /target/boot/uboot
				fi
			fi
		fi

		if [ -d /lib/firmware/ ] ; then
			cp -rf /lib/firmware/ /target/lib/ || true
		fi

		mount -o bind /sys /target/sys

		#Needed by finish-install.sh to determine root file system location
		cat /proc/mounts > /target/boot/uboot/mounts

		mkdir -p /target/etc/hwpack/
		cp /etc/hwpack/SOC.sh /target/etc/hwpack/
		cp /etc/hwpack/SOC.sh /target/boot/

		chroot /target /bin/bash /usr/bin/finish-install.sh

		cp /zz-uenv_txt /target/etc/kernel/postinst.d/
		chmod +x /target/etc/kernel/postinst.d/zz-uenv_txt

		rm -f /target/mounts || true

		cat /proc/mounts > /target/boot/uboot/backup/proc_mounts
		cat /var/log/syslog > /target/boot/uboot/backup/syslog.log

		umount /target/sys
		sync
		umount /target/boot/uboot

		rm -rf /target/usr/bin/finish-install.sh || true

	__EOF__

	chmod a+x ${TEMPDIR}/initrd-tree/usr/lib/finish-install.d/08rcn-ee-finish-installing-device
}

setup_parition_recipe () {
	#This (so far) has been leaving the first Partition Alone...
	if [ "x${no_swap}" = "xenabled" ] ; then
	cat > ${TEMPDIR}/initrd-tree/partition_recipe <<-__EOF__
		        500 1000 -1 ext4
		                method{ format } format{ }
		                use_filesystem{ } filesystem{ ext4 }
		                mountpoint{ / } label{ rootfs }
		                options/noatime{ noatime } .

	__EOF__
	else
		if [ ! "${conf_swapsize_mb}" ] ; then
			conf_swapsize_mb=1024
		fi
		
		cat > ${TEMPDIR}/initrd-tree/partition_recipe <<-__EOF__
			        500 1000 -1 ext4
			                method{ format } format{ }
			                use_filesystem{ } filesystem{ ext4 }
			                mountpoint{ / } label{ rootfs }
			                options/noatime{ noatime } .
			 
			        128 1200 ${conf_swapsize_mb} linux-swap
			                method{ swap }
			                format{ } .

		__EOF__
	fi
}

initrd_preseed_settings () {
	echo "NetInstall: Adding Distro Tweaks and Preseed Configuration"
	cd ${TEMPDIR}/initrd-tree/

	cp -v "${DIR}/lib/${deb_distribution}-finish.sh" ${TEMPDIR}/initrd-tree/usr/bin/finish-install.sh
	if [ "x${conf_smart_uboot}" = "xenable" ] ; then
		sed -i -e 's:smart_DISABLED:enable:g' ${TEMPDIR}/initrd-tree/usr/bin/finish-install.sh
	fi

	neuter_flash_kernel

	finish_installing_device
	setup_parition_recipe
	cp -v "${DIR}/lib/shared/zz-uenv_txt" ${TEMPDIR}/initrd-tree/zz-uenv_txt
	cp -v "${DIR}/lib/${DIST}-preseed.cfg" ${TEMPDIR}/initrd-tree/preseed.cfg

	#repos.rcn-ee.net: add linux-image-${uname -r}
	sed -i -e 's:initramfs-tools:initramfs-tools linux-image-'$uname_r':g' ${TEMPDIR}/initrd-tree/preseed.cfg
	cat ${TEMPDIR}/initrd-tree/preseed.cfg | grep linux-image

	case "${DIST}" in
	wheezy)
		if [ ! "x${di_serial_mode}" = "xenable" ] && [ "${conf_kernel_usb_not_builtin}" ] ; then
			sed -i -e 's:#d-i console-tools:d-i console-tools:g' ${TEMPDIR}/initrd-tree/preseed.cfg
			sed -i -e 's:#d-i debian-installer:d-i debian-installer:g' ${TEMPDIR}/initrd-tree/preseed.cfg
			sed -i -e 's:#d-i console-keymaps-at:d-i console-keymaps-at:g' ${TEMPDIR}/initrd-tree/preseed.cfg
		fi
		;;
	esac

	cd "${DIR}"/
}

extract_zimage () {
	echo "NetInstall: Extracting Kernel Boot Image"
	dpkg -x "${DIR}/dl/${DISTARCH}/${ACTUAL_DEB_FILE}" ${TEMPDIR}/kernel
}

generate_soc () {
	echo "#!/bin/sh" > ${wfile}
	echo "format=1.0" >> ${wfile}
	echo "board=${conf_board}" >> ${wfile}
	echo "" >> ${wfile}
	echo "bootloader_location=${bootloader_location}" >> ${wfile}
	echo "dd_spl_uboot_seek=${dd_spl_uboot_seek}" >> ${wfile}
	echo "dd_spl_uboot_bs=${dd_spl_uboot_bs}" >> ${wfile}
	echo "dd_uboot_seek=${dd_uboot_seek}" >> ${wfile}
	echo "dd_uboot_bs=${dd_uboot_bs}" >> ${wfile}
	echo "" >> ${wfile}
	echo "boot_fstype=${conf_boot_fstype}" >> ${wfile}
	echo "" >> ${wfile}
	echo "#Kernel" >> ${wfile}
	echo "dtb=${dtb}" >> ${wfile}
	echo "serial_tty=${SERIAL}" >> ${wfile}
	echo "usbnet_mem=${usbnet_mem}" >> ${wfile}

	if [ ! "x${di_serial_mode}" = "xenable" ] ; then
		echo "optargs=console=tty0" >> ${wfile}
		if [ "x${drm_read_edid_broken}" = "xenable" ] ; then
			echo "video=${drm_device_identifier}:1024x768@60e" >> ${wfile}
		fi
	fi

	echo "" >> ${wfile}
}

initrd_device_settings () {
	echo "NetInstall: Adding Device Tweaks"

	#work around for the kevent smsc95xx issue
	touch ${TEMPDIR}/initrd-tree/etc/sysctl.conf
	if [ "${usbnet_mem}" ] ; then
		echo "vm.min_free_kbytes = ${usbnet_mem}" >> ${TEMPDIR}/initrd-tree/etc/sysctl.conf
	fi

	mkdir -p ${TEMPDIR}/initrd-tree/etc/hwpack/

	wfile="${TEMPDIR}/initrd-tree/etc/hwpack/SOC.sh"
	generate_soc
}

recompress_initrd () {
	echo "NetInstall: Compressing initrd image"
	cd ${TEMPDIR}/initrd-tree/
	find . | cpio -o -H newc | gzip -9 > ${TEMPDIR}/initrd.mod.gz
	cd "${DIR}/"
}

create_custom_netinstall_image () {
	echo ""
	echo "NetInstall: Creating Custom Image"
	echo "-----------------------------"
	mkdir -p ${TEMPDIR}/kernel
	mkdir -p ${TEMPDIR}/initrd-tree/lib/firmware/
	mkdir -p ${TEMPDIR}/initrd-tree/fixes

	extract_base_initrd

	#Copy Device Firmware
	cp -r ${TEMPDIR}/firmware/ ${TEMPDIR}/initrd-tree/lib/

	if [ "${FIRMWARE}" ] ; then
		initrd_add_firmware
	fi

	initrd_cleanup
	initrd_preseed_settings
	extract_zimage
	initrd_device_settings
	recompress_initrd
}

drive_error_ro () {
	echo "-----------------------------"
	echo "Error: for some reason your SD card is not writable..."
	echo "Check: is the write protect lever set the locked position?"
	echo "Check: do you have another SD card reader?"
	echo "-----------------------------"
	echo "Script gave up..."

	exit
}

unmount_all_drive_partitions () {
	echo ""
	echo "Unmounting Partitions"
	echo "-----------------------------"

	NUM_MOUNTS=$(mount | grep -v none | grep "${media}" | wc -l)

##	for (i=1;i<=${NUM_MOUNTS};i++)
	for ((i=1;i<=${NUM_MOUNTS};i++))
	do
		DRIVE=$(mount | grep -v none | grep "${media}" | tail -1 | awk '{print $1}')
		umount ${DRIVE} >/dev/null 2>&1 || true
	done

	if [ ! "x${conf_smart_uboot}" = "xenable" ] ; then
		count="100"
	else
		count="50"
	fi

	echo "Zeroing out Partition Table"
	dd if=/dev/zero of=${media} bs=1M count=${count} || drive_error_ro
	sync
	dd if=${media} of=/dev/null bs=1M count=${count}
	sync
}

sfdisk_partition_layout () {
	#Generic boot partition created by sfdisk
	echo ""
	echo "Using sfdisk to create partition layout"
	echo "-----------------------------"

	LC_ALL=C sfdisk --force --in-order --Linux --unit M "${media}" <<-__EOF__
		${conf_boot_startmb},${conf_boot_endmb},${sfdisk_fstype},*
	__EOF__

	sync
}

dd_uboot_boot () {
	#For: Freescale: i.mx5/6 Devices
	echo ""
	echo "Using dd to place bootloader on drive"
	echo "-----------------------------"
	dd if=${TEMPDIR}/dl/${UBOOT} of=${media} seek=${dd_uboot_seek} bs=${dd_uboot_bs}
	bootloader_installed=1
}

dd_spl_uboot_boot () {
	#For: Samsung: Exynos 4 Devices
	echo ""
	echo "Using dd to place bootloader on drive"
	echo "-----------------------------"
	dd if=${TEMPDIR}/dl/${UBOOT} of=${media} seek=${dd_spl_uboot_seek} bs=${dd_spl_uboot_bs}
	dd if=${TEMPDIR}/dl/${UBOOT} of=${media} seek=${dd_uboot_seek} bs=${dd_uboot_bs}
	bootloader_installed=1
}

format_partition_error () {
	echo "Failure: formating partition"
	exit
}

format_boot_partition () {
	echo "Formating Boot Partition"
	echo "-----------------------------"
	partprobe ${media}
	LC_ALL=C ${mkfs} ${media_prefix}1 ${mkfs_label} || format_partition_error
}

create_partitions () {
	unset bootloader_installed

	if [ "x${conf_boot_fstype}" = "xfat" ] ; then
		mount_partition_format="vfat"
		mkfs="mkfs.vfat -F 16"
		mkfs_label="-n ${BOOT_LABEL}"
	else
		mount_partition_format="${conf_boot_fstype}"
		mkfs="mkfs.${conf_boot_fstype}"
		mkfs_label="-L ${BOOT_LABEL}"
	fi

	case "${bootloader_location}" in
	fatfs_boot)
		sfdisk_partition_layout
		;;
	dd_uboot_boot)
		dd_uboot_boot
		sfdisk_partition_layout
		;;
	dd_spl_uboot_boot)
		dd_spl_uboot_boot
		sfdisk_partition_layout
		;;
	*)
		sfdisk_partition_layout
		;;
	esac
	format_boot_partition
	echo "Final Created Partition:"
	LC_ALL=C fdisk -l ${media}
	echo "-----------------------------"
}

populate_boot () {
	echo "Populating Boot Partition"
	echo "-----------------------------"

	if [ ! -d ${TEMPDIR}/disk ] ; then
		mkdir -p ${TEMPDIR}/disk
	fi

	partprobe ${media}
	if ! mount -t ${mount_partition_format} ${media_prefix}1 ${TEMPDIR}/disk; then
		echo "-----------------------------"
		echo "Unable to mount ${media_prefix}1 at ${TEMPDIR}/disk to complete populating Boot Partition"
		echo "Please retry running the script, sometimes rebooting your system helps."
		echo "-----------------------------"
		exit
	fi

	mkdir -p ${TEMPDIR}/disk/backup || true
	mkdir -p ${TEMPDIR}/disk/boot/dtbs/current/ || true

	if [ "${spl_name}" ] ; then
		if [ -f ${TEMPDIR}/dl/${SPL} ] ; then
			if [ ! "${bootloader_installed}" ] ; then
				cp -v ${TEMPDIR}/dl/${SPL} ${TEMPDIR}/disk/${spl_name}
				echo "-----------------------------"
			fi
		fi
	fi

	if [ "${boot_name}" ] ; then
		if [ -f ${TEMPDIR}/dl/${UBOOT} ] ; then
			if [ ! "${bootloader_installed}" ] ; then
				cp -v ${TEMPDIR}/dl/${UBOOT} ${TEMPDIR}/disk/${boot_name}
				echo "-----------------------------"
			fi
		fi
	fi

	if [ -f ${TEMPDIR}/kernel/boot/vmlinuz-* ] ; then
		LINUX_VER=$(ls ${TEMPDIR}/kernel/boot/vmlinuz-* | awk -F'vmlinuz-' '{print $2}')
		echo "Copying Kernel images:"

		cp -v ${TEMPDIR}/kernel/boot/vmlinuz-* ${TEMPDIR}/disk/boot/vmlinuz-current

		if [ ! "x${conf_smart_uboot}" = "xenable" ] ; then
			mkimage -A arm -O linux -T kernel -C none -a ${conf_zreladdr} -e ${conf_zreladdr} -n ${LINUX_VER} -d ${TEMPDIR}/kernel/boot/vmlinuz-* ${TEMPDIR}/disk/uImage.net
			cp -v ${TEMPDIR}/kernel/boot/vmlinuz-* ${TEMPDIR}/disk/zImage.net
		fi

		echo "-----------------------------"
	fi

	if [ -f ${TEMPDIR}/initrd.mod.gz ] ; then
		#This is 20+ MB in size, just copy one..
		echo "Copying Kernel initrds:"
		if [ "x${conf_smart_uboot}" = "xenable" ] ; then
			cp -v ${TEMPDIR}/initrd.mod.gz ${TEMPDIR}/disk/boot/initrd.img-current
		else
			if [ ${mkimage_initrd} ] ; then
				mkimage -A arm -O linux -T ramdisk -C none -a 0 -e 0 -n initramfs -d ${TEMPDIR}/initrd.mod.gz ${TEMPDIR}/disk/uInitrd.net
			else
				cp -v ${TEMPDIR}/initrd.mod.gz ${TEMPDIR}/disk/initrd.net
			fi
		fi
		echo "-----------------------------"
	fi

	echo "Copying Device Tree Files:"
	if [ "x${conf_smart_uboot}" = "xenable" ] ; then
		cp ${TEMPDIR}/kernel/boot/dtbs/${uname_r}/*.dtb ${TEMPDIR}/disk/boot/dtbs/current/
	else
		cp ${TEMPDIR}/kernel/boot/dtbs/${uname_r}/*.dtb ${TEMPDIR}/disk/dtbs/
		cp ${TEMPDIR}/kernel/boot/dtbs/${uname_r}/*.dtb ${TEMPDIR}/disk/boot/dtbs/current/
	fi

	if [ "${conf_uboot_bootscript}" ] ; then
		case "${conf_fdtfile}" in
		imx6q-sabrelite.dtb)
			cat > ${TEMPDIR}/bootscripts/loader.cmd <<-__EOF__
				echo "${conf_uboot_bootscript} -> uEnv.txt wrapper..."
				#boundarydevices.com uses disk over mmcdev
				if test -n \$disk; then
					setenv mmcdev \$disk
					setenv mmcpart 1
				fi
				${conf_fileload} mmc \${mmcdev}:\${mmcpart} \${loadaddr} uEnv.txt
				env import -t \${loadaddr} \${filesize}
				run uenvcmd
			__EOF__
			;;
		tegra124-jetson-tk1.dtb)
			cat > ${TEMPDIR}/bootscripts/loader.cmd <<-__EOF__
				echo "${conf_uboot_bootscript} -> uEnv.txt wrapper..."
				setenv mmcdev \$devnum
				setenv mmcpart \$rootpart
				${conf_fileload} mmc \${mmcdev}:\${mmcpart} \${loadaddr} uEnv.txt
				env import -t \${loadaddr} \${filesize}
				run uenvcmd
			__EOF__
			;;
		esac
		if [ -f ${TEMPDIR}/bootscripts/loader.cmd ] ; then
			cat ${TEMPDIR}/bootscripts/loader.cmd
			echo "-----------------------------"
			mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "wrapper" -d ${TEMPDIR}/bootscripts/loader.cmd ${TEMPDIR}/disk/${conf_uboot_bootscript}
			cp -v ${TEMPDIR}/disk/${conf_uboot_bootscript} ${TEMPDIR}/disk/backup/${conf_uboot_bootscript}
		else
			echo "Error: conf_fdtfile not defined with conf_uboot_bootscript"
			exit 1
		fi
	fi

	echo "Copying uEnv.txt based boot scripts to Boot Partition"

	if [ "x${conf_smart_uboot}" = "xenable" ] ; then
		wfile="${TEMPDIR}/disk/boot/uEnv.txt"

		echo "uname_r=current" > ${wfile}

		mmcargs="mmcargs=run message; setenv bootargs console"

		if [ "x${di_serial_mode}" = "xenable" ] ; then
			echo "message=echo; echo Installer for [${DISTARCH}] is using the Serial Interface; echo;" >> ${wfile}
			mmcargs="${mmcargs}=${SERIAL_CONSOLE} root=/dev/ram0 rw"
		else
			echo "message=echo; echo Installer for [${DISTARCH}] is using the Video Interface; echo Use [--serial-mode] to force Installing over the Serial Interface; echo;" >> ${wfile}
			mmcargs="${mmcargs}=tty0 root=/dev/ram0 rw"
		fi

		if [ "x${drm_read_edid_broken}" = "xenable" ] ; then
			mmcargs="${mmcargs} video=${drm_device_identifier}:1024x768@60e"
		fi

		if [ ! "x${cmdline}" = "x" ] ; then
			mmcargs="${mmcargs} ${cmdline}"
		fi

		echo "${mmcargs}" >> ${wfile}

		echo "Net Install Boot Script:"
		cat ${wfile}
		echo "-----------------------------"

	else

		echo "Net Install Boot Script:"
		cp -v ${TEMPDIR}/bootscripts/netinstall.cmd ${TEMPDIR}/disk/uEnv.txt
		echo "-----------------------------"
		cat ${TEMPDIR}/bootscripts/netinstall.cmd
		rm -rf ${TEMPDIR}/bootscripts/netinstall.cmd || true
		echo "-----------------------------"
		echo "Normal Boot Script:"
		cp -v ${TEMPDIR}/bootscripts/normal.cmd ${TEMPDIR}/disk/backup/normal.txt
		echo "-----------------------------"
		cat ${TEMPDIR}/bootscripts/normal.cmd
		rm -rf ${TEMPDIR}/bootscripts/normal.cmd || true
		echo "-----------------------------"

	fi

	wfile="${TEMPDIR}/disk/SOC.sh"
	generate_soc

	echo "Debug:"
	cat ${wfile}

	cd ${TEMPDIR}/disk
	sync
	cd "${DIR}"/

	echo "Debug: Contents of Boot Partition"
	echo "-----------------------------"
	ls -lh ${TEMPDIR}/disk/
	du -sh ${TEMPDIR}/disk/
	echo "-----------------------------"

	umount ${TEMPDIR}/disk || true

	echo "Finished populating Boot Partition"
	echo "-----------------------------"

	echo "mk_mmc.sh script complete"
	echo "Script Version git: ${GIT_VERSION}"
	echo "-----------------------------"
	if [ "x${deb_distribution}" = "xubuntu" ] ; then
		echo "Note: with Ubuntu Releases"
		echo "During Install, after proxy setup, there seems to be a VERY LONG delay..."
		echo "(on average it seems to be taking anywhere between 10-20 Minutes)..."
		echo "In the background: Ubuntu is trying really-really hard to find a compatible kernel..."
		echo "-----------------------------"
	fi
	if [ "${conf_note}" ] ; then
		echo ${conf_note}
		echo "-----------------------------"
	fi
	if [ "${conf_note_bootloader}" ] ; then
		echo "This script requires the bootloader to be already installed, see:"
		echo ${conf_note_bootloader}
		echo "-----------------------------"
	fi
	echo "Reporting Bugs:"
	echo "https://github.com/RobertCNelson/netinstall/issues"
	echo "Please include: /var/log/netinstall.log from RootFileSystem"
	echo "-----------------------------"
}

check_mmc () {
	FDISK=$(LC_ALL=C fdisk -l 2>/dev/null | grep "Disk ${media}[^(a-z,A-Z,0-9)]" | awk '{print $2}')

	if [ "x${FDISK}" = "x${media}:" ] ; then
		echo ""
		echo "I see..."
		echo "lsblk:"
		lsblk | grep -v sr0
		echo ""
		unset response
		echo -n "Are you 100% sure, on selecting [${media}] (y/n)? "
		read response
		if [ "x${response}" != "xy" ] ; then
			exit
		fi
		echo ""
	else
		echo ""
		echo "Are you sure? I Don't see [${media}], here is what I do see..."
		echo ""
		echo "lsblk:"
		lsblk | grep -v sr0
		echo ""
		exit
	fi
}

uboot_dtb_error () {

	if [ "${tried_uboot}" ] ; then
		echo "-----------------------------"
		echo "[--uboot <board>] has been replaced by [--dtb <board>]"
		echo "see the list below..."
		echo "-----------------------------"
	fi

	echo "--dtb (device tree) options..."
	cat <<-__EOF__
		-----------------------------
		ERROR: This script does not currently recognize the selected: [--dtb ${dtb_board}] option..
		Please rerun $(basename $0) with a valid [--dtb <device>] option from the list below:
		-----------------------------
	__EOF__
	cat "${DIR}"/hwpack/*.conf | grep supported
	echo "-----------------------------"
}

show_board_warning () {
	echo "-----------------------------"
	echo "Warning: at this time, this board [${dtb_board}] has a few issues with the NetInstall"
	echo "-----------------------------"
	echo ${conf_warning}
	echo "-----------------------------"
	echo "Alternate install:"
	echo "http://elinux.org/BeagleBoardUbuntu#Demo_Image"
	echo "http://elinux.org/BeagleBoardDebian#Demo_Image"
	echo "-----------------------------"
	unset response
	echo -n "Knowing these issues, would you like to continue to install [${dtb_board}] (y/n)? "
	read response
	if [ "x${response}" != "xy" ] ; then
		exit
	fi
}

process_dtb_conf () {
	if [ "${conf_warning}" ] ; then
		show_board_warning
	fi

	echo "-----------------------------"

	#defaults, if not set...
	conf_boot_startmb=${conf_boot_startmb:-"1"}
	if [ ! "x${conf_smart_uboot}" = "xenable" ] ; then
		conf_boot_endmb=${conf_boot_endmb:-"96"}
	else
		conf_boot_endmb=${conf_boot_endmb:-"48"}
	fi
	conf_root_device=${conf_root_device:-"/dev/mmcblk0"}

	#error checking...
	if [ ! "${conf_boot_fstype}" ] ; then
		echo "Error: [conf_boot_fstype] not defined, stopping..."
		exit
	else
		case "${conf_boot_fstype}" in
		fat)
			sfdisk_fstype="0xE"
			;;
		ext2|ext3|ext4)
			sfdisk_fstype="0x83"
			;;
		*)
			echo "Error: [conf_boot_fstype] not recognized, stopping..."
			exit
			;;
		esac
	fi

	if [ "${conf_uboot_CONFIG_CMD_BOOTZ}" ] ; then
		conf_bootcmd="bootz"
		conf_normal_kernel_file=zImage
		conf_net_kernel_file=zImage.net
	else
		conf_bootcmd="bootm"
		conf_normal_kernel_file=uImage
		conf_net_kernel_file=uImage.net
	fi

	if [ "${conf_uboot_CONFIG_SUPPORT_RAW_INITRD}" ] ; then
		conf_normal_initrd_file=initrd.img
		conf_net_initrd_file=initrd.net
	else
		mkimage_initrd=1
		conf_normal_initrd_file=uInitrd
		conf_net_initrd_file=uInitrd.net
	fi

	if [ "${conf_uboot_CONFIG_CMD_FS_GENERIC}" ] ; then
		conf_fileload="load"
	else
		if [ "x${conf_boot_fstype}" = "xfat" ] ; then
			conf_fileload="fatload"
		else
			conf_fileload="ext2load"
		fi
	fi

	if [ ! "x${conf_smart_uboot}" = "xenable" ] ; then
		if [ "${conf_uboot_use_uenvcmd}" ] ; then
			conf_entrypt="uenvcmd"
		else
			if [ ! "x${conf_uboot_no_uenvcmd}" = "x" ] ; then
				conf_entrypt="${conf_uboot_no_uenvcmd}"
			else
				echo "Error: [conf_uboot_no_uenvcmd] not defined, stopping..."
				exit
			fi
		fi
	fi
}

check_dtb_board () {
	error_invalid_dtb=1

	#/hwpack/${dtb_board}.conf
	unset leading_slash
	leading_slash=$(echo ${dtb_board} | grep "/" || unset leading_slash)
	if [ "${leading_slash}" ] ; then
		dtb_board=$(echo "${leading_slash##*/}")
	fi

	#${dtb_board}.conf
	dtb_board=$(echo ${dtb_board} | awk -F ".conf" '{print $1}')
	if [ -f "${DIR}"/hwpack/${dtb_board}.conf ] ; then
		. "${DIR}"/hwpack/${dtb_board}.conf
		unset error_invalid_dtb
		process_dtb_conf
	else
		uboot_dtb_error
		exit
	fi
}

check_distro () {
	unset IN_VALID_DISTRO
	ARCH="armhf"

	case "${DISTRO_TYPE}" in
	trusty|trusty-armhf)
		DIST="trusty"
		deb_distribution="ubuntu"
		;;
	utopic|utopic-armhf)
		DIST="utopic"
		deb_distribution="ubuntu"
		;;
	wheezy|wheezy-armhf)
		DIST="wheezy"
		deb_distribution="debian"
		;;
	jessie|jessie-armhf)
		DIST="jessie"
		deb_distribution="debian"
		;;
	*)
		IN_VALID_DISTRO=1
		cat <<-__EOF__
			-----------------------------
			ERROR: This script does not currently recognize the selected: [--distro ${DISTRO_TYPE}] option..
			Please rerun $(basename $0) with a valid [--distro <distro>] option from the list below:
			-----------------------------
			--distro <distro>
			        Debian:
			                wheezy-armhf <default> (armv7-a)
			                jessie-armhf (armv7-a) (alpha)
			        Ubuntu:
			                trusty (14.04) (armv7-a)
			-----------------------------
		__EOF__
		exit
		;;
	esac
	DISTARCH="${DIST}-${ARCH}"
}

usage () {
	echo "usage: sudo $(basename $0) --mmc /dev/sdX --dtb <dev board>"
	#tabed to match 
		cat <<-__EOF__
			Script Version git: ${GIT_VERSION}
			-----------------------------
			Bugs email: "bugs at rcn-ee.com"

			Required Options:
			--mmc </dev/sdX>

			--dtb <dev board>
			        Freescale:
			                imx51-babbage
			                imx53-qsb
			                imx6q-sabrelite
			                imx6q-sabresd
			                wandboard-solo
			                wandboard-dual
			                wandboard-quad
			        TI:
			                am335x-bone-serial
			                am335x-bone-video
			                am335x-boneblack
			                omap3-beagle (serial only)
			                omap3-beagle-xm
			                omap4-panda (serial only)
			                omap4-panda-a4 (serial only)
			                omap4-panda-es (serial only)

			Optional:
			--distro <distro>
			        Debian:
			                wheezy-armhf <default> (Cortex-A+)
			                jessie-armhf (Cortex-A+) (alpha)
			        Ubuntu:
			                trusty (14.04) (Cortex-A+) (EOL: xyz 20xy)

			--firmware
			        <include all firmwares from linux-firmware git repo>

			--serial-mode
			        <use the serial to run the netinstall (video ouputs will remain blank till final reboot)>

			Additional Options:
			        -h --help

			--probe-mmc
			        <list all partitions: sudo ./mk_mmc.sh --probe-mmc>

			__EOF__
	exit
}

checkparm () {
	if [ "$(echo $1|grep ^'\-')" ] ; then
		echo "E: Need an argument"
		usage
	fi
}

error_invalid_dtb=1

# parse commandline options
while [ ! -z "$1" ] ; do
	case $1 in
	-h|--help)
		usage
		media=1
		;;
	--probe-mmc)
		media="/dev/idontknow"
		check_root
		check_mmc
		;;
	--mmc)
		checkparm $2
		media="$2"
		media_prefix="${media}"
		echo ${media} | grep mmcblk >/dev/null && media_prefix="${media}p"
		check_root
		check_mmc
		;;
	--no-swap)
		no_swap="enabled"
		;;
	--uboot)
		checkparm $2
		UBOOT_TYPE="$2"
		unset dtb_board
		tried_uboot=1
		check_dtb_board
		;;
	--dtb)
		checkparm $2
		dtb_board="$2"
		check_dtb_board
		;;
	--distro)
		checkparm $2
		DISTRO_TYPE="$2"
		check_distro
		;;
	--firmware)
		FIRMWARE=1
		;;
	--serial-mode)
		di_serial_mode="enable"
		;;
	--deb-file)
		checkparm $2
		external_deb_file="$2"
		DEB_FILE="${external_deb_file}"
		KERNEL_DEB=1
		;;
	--use-beta-kernel)
		BETA_KERNEL=1
		;;
	--use-experimental-kernel)
		EXPERIMENTAL_KERNEL=1
		;;
	--spl)
		checkparm $2
		LOCAL_SPL="$2"
		USE_LOCAL_BOOT=1
		;;
	--bootloader)
		checkparm $2
		LOCAL_BOOTLOADER="$2"
		USE_LOCAL_BOOT=1
		;;
	--use-beta-bootloader)
		USE_BETA_BOOTLOADER=1
		;;
	esac
	shift
done

if [ ! "${media}" ] ; then
	echo "ERROR: --mmc undefined"
	usage
fi

if [ "${error_invalid_dtb}" ] ; then
	echo "-----------------------------"
	echo "ERROR: --dtb undefined"
	echo "-----------------------------"
	uboot_dtb_error
	exit
fi

echo ""
echo "Script Version git: ${GIT_VERSION}"
echo "-----------------------------"

check_root
detect_software

if [ ! "${conf_bootloader_in_flash}" ] ; then
	if [ "${spl_name}" ] || [ "${boot_name}" ] ; then
		if [ "${USE_LOCAL_BOOT}" ] ; then
			local_bootloader
		else
			dl_bootloader
		fi
	fi
fi

dl_kernel_image
dl_netinstall_image

dl_device_firmware

setup_bootscripts
create_custom_netinstall_image

unmount_all_drive_partitions
create_partitions
populate_boot