#!/bin/bash
#https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts?id=refs/tags/v3.9-rc6
#        --dtb imx6q-sabresd (Freescale i.MX6q SABRE Board for Smart Devices:supported)

#Bootloader:
conf_board="MX6QSABRESD"
conf_bl_http="http://rcn-ee.net/deb/tools/latest/"
conf_bl_listfile="bootloader-ng"

#Bootloader Partition:
conf_boot_fstype="ext2"
conf_boot_startmb="1"
conf_boot_endmb="96"

bootloader_location="dd_uboot_boot"
dd_uboot_bs="512"
dd_uboot_seek="2"
unset spl_name
boot_name="u-boot.imx"

#Bootloader: u-boot features:

#CONFIG_CMD_BOOTZ
#bootz & zImage
conf_uboot_CONFIG_CMD_BOOTZ=1

#CONFIG_SUPPORT_RAW_INITRD
#allows booting un-mkimage wrapped initrds
conf_uboot_CONFIG_SUPPORT_RAW_INITRD=1

#CONFIG_CMD_FS_GENERIC
#allows using "load" over "fatload"/"ext2load"
conf_uboot_CONFIG_CMD_FS_GENERIC=1

#uenvcmd avaiable?
conf_uboot_use_uenvcmd=1
#conf_uboot_no_uenvcmd="loaduimage"

#can the bootloader auto detect the device: (*.dtb)?
#uboot_fdt_auto_detection=1

#Kernel:
#http://rcn-ee.net/deb/wheezy-armhf/LATEST-imx
kernel_subarch="imx"
kernel_repo="STABLE"

usbnet_mem=

#Kernel: Bootloader Settings:
conf_zreladdr="0x10008000"
conf_loadaddr="0x12000000"
conf_fdtaddr="0x11000000"
#initrdaddr = loadaddr + 10(mb) * 10 0000 = 0x12A0 0000 (10MB)
conf_initrdaddr="0x12A00000"
conf_fdtfile="imx6q-sabresd.dtb"
need_dtbs=1

SERIAL="ttymxc0"
SERIAL_CONSOLE="${SERIAL},115200n8"

SERIAL_MODE=1

VIDEO_CONSOLE="console=tty0"
HAS_IMX_BLOB=1
VIDEO_FB="mxcdi1fb"
VIDEO_TIMING="RGB24,1280x720M@60"