hwpack: two imx53-qs(r)b

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

hwpack/imx53-qsb.conf

@@ -1,5 +1,5 @@
 #!/bin/bash
-#        --dtb imx53-qsb (Freescale i.MX53 Quick Start Development Board:supported)
+#        --dtb imx53-qsb (Freescale i.MX53 Quick Start Board:supported)
 
 #Bootloader:
 conf_board="mx53loco"
@@ -34,7 +34,7 @@ conf_uboot_use_uenvcmd=1
 #conf_uboot_no_uenvcmd="loaduimage"
 
 #can the bootloader auto detect the device: (*.dtb)?
-uboot_fdt_auto_detection=1
+#uboot_fdt_auto_detection=1
 
 #with mainline u-boot, the variable for the *.dtb file can vary
 uboot_fdt_variable_name="fdt_file"
@@ -52,6 +52,7 @@ conf_zreladdr="0x70008000"
 conf_loadaddr="0x70010000"
 conf_fdtaddr="0x71ff0000"
 conf_initrdaddr="0x72000000"
+conf_fdtfile="imx53-qsb.dtb"
 
 SYSTEM="video"
 

hwpack/imx53-qsrb.conf

@@ -0,0 +1,63 @@
+#!/bin/bash
+#        --dtb imx53-qsrb (Freescale i.MX53 Quick Start-R Board:supported)
+
+#Bootloader:
+conf_board="mx53loco"
+conf_bl_http="https://rcn-ee.net/deb/tools/latest"
+conf_bl_listfile="bootloader-ng"
+
+#Bootloader Partition:
+conf_boot_fstype="ext2"
+
+bootloader_location="dd_uboot_boot"
+dd_uboot_bs="512"
+dd_uboot_seek="2"
+unset spl_name
+boot_name="u-boot.imx"
+
+#Bootloader: u-boot features:
+
+#CONFIG_CMD_BOOTZ
+#bootz & zImage
+conf_uboot_CONFIG_CMD_BOOTZ=1
+
+#CONFIG_SUPPORT_RAW_INITRD
+#allows booting un-mkimage wrapped initrds
+conf_uboot_CONFIG_SUPPORT_RAW_INITRD=1
+
+#CONFIG_CMD_FS_GENERIC
+#allows using "load" over "fatload"/"ext2load"
+conf_uboot_CONFIG_CMD_FS_GENERIC=1
+
+#uenvcmd avaiable?
+conf_uboot_use_uenvcmd=1
+#conf_uboot_no_uenvcmd="loaduimage"
+
+#can the bootloader auto detect the device: (*.dtb)?
+#uboot_fdt_auto_detection=1
+
+#with mainline u-boot, the variable for the *.dtb file can vary
+uboot_fdt_variable_name="fdt_file"
+
+#Kernel:
+#https://rcn-ee.net/deb/wheezy-armhf/LATEST-armv7
+kernel_subarch="armv7"
+kernel_repo="STABLE"
+#kernel_repo="TESTING"
+
+usbnet_mem=
+
+#Kernel: Bootloader Settings:
+conf_zreladdr="0x70008000"
+conf_loadaddr="0x70010000"
+conf_fdtaddr="0x71ff0000"
+conf_initrdaddr="0x72000000"
+conf_fdtfile="imx53-qsrb.dtb"
+
+SYSTEM="video"
+
+SERIAL="ttymxc0"
+SERIAL_CONSOLE="${SERIAL},115200n8"
+
+USE_KMS=1
+drm_device_identifier="VGA-1"