diff --git a/hwpack/am335x-bone-serial.conf b/hwpack/am335x-bone-serial.conf
index d859b4a..d155b6d 100644
--- a/hwpack/am335x-bone-serial.conf
+++ b/hwpack/am335x-bone-serial.conf
@@ -8,56 +8,23 @@ conf_bl_listfile="bootloader-ng"
 
 #Bootloader Partition:
 conf_boot_fstype="fat"
-
 bootloader_location="fatfs_boot"
 spl_name="MLO"
 boot_name="u-boot.img"
 
 #Bootloader: u-boot features:
-
-#CONFIG_CMD_BOOTZ
-#bootz & zImage
-conf_uboot_CONFIG_CMD_BOOTZ=1
-
-#CONFIG_SUPPORT_RAW_INITRD
-#allows booting un-mkimage wrapped initrds
-conf_uboot_CONFIG_SUPPORT_RAW_INITRD=1
-
-#CONFIG_CMD_FS_GENERIC
-#allows using "load" over "fatload"/"ext2load"
-conf_uboot_CONFIG_CMD_FS_GENERIC=1
-
-#uenvcmd avaiable?
-conf_uboot_use_uenvcmd=1
-#conf_uboot_no_uenvcmd="loaduimage"
-
-#can the bootloader auto detect the device: (*.dtb)?
-uboot_fdt_auto_detection=1
-
-#with mainline u-boot, the variable for the *.dtb file can vary
-#uboot_fdt_variable_name="fdt_file"
+conf_smart_uboot="enable"
 
 #Kernel:
 #https://rcn-ee.net/deb/wheezy-armhf/LATEST-omap-psp
 kernel_subarch="omap-psp"
 kernel_repo="STABLE"
 #kernel_repo="TESTING"
-
+dtb=
 usbnet_mem=
-
-#Kernel: Bootloader Settings:
-conf_zreladdr="0x80008000"
-conf_loadaddr="0x82000000"
-conf_fdtaddr="0x88000000"
-conf_initrdaddr="0x88080000"
 need_am335x_firmware=1
 
-SYSTEM="serial"
-
 SERIAL="ttyO0"
 SERIAL_CONSOLE="${SERIAL},115200n8"
-
-di_serial_mode=enable
-
+di_serial_mode="enable"
 conf_note="Note: During the install use a 5Volt DC power supply as USB does not always provide enough power. If board locks up on boot run [sudo ifconfig usb0 up] on host."
-#
diff --git a/hwpack/am335x-bone-video.conf b/hwpack/am335x-bone-video.conf
index add6390..0886369 100644
--- a/hwpack/am335x-bone-video.conf
+++ b/hwpack/am335x-bone-video.conf
@@ -8,56 +8,23 @@ conf_bl_listfile="bootloader-ng"
 
 #Bootloader Partition:
 conf_boot_fstype="fat"
-
 bootloader_location="fatfs_boot"
 spl_name="MLO"
 boot_name="u-boot.img"
 
 #Bootloader: u-boot features:
-
-#CONFIG_CMD_BOOTZ
-#bootz & zImage
-conf_uboot_CONFIG_CMD_BOOTZ=1
-
-#CONFIG_SUPPORT_RAW_INITRD
-#allows booting un-mkimage wrapped initrds
-conf_uboot_CONFIG_SUPPORT_RAW_INITRD=1
-
-#CONFIG_CMD_FS_GENERIC
-#allows using "load" over "fatload"/"ext2load"
-conf_uboot_CONFIG_CMD_FS_GENERIC=1
-
-#uenvcmd avaiable?
-conf_uboot_use_uenvcmd=1
-#conf_uboot_no_uenvcmd="loaduimage"
-
-#can the bootloader auto detect the device: (*.dtb)?
-uboot_fdt_auto_detection=1
-
-#with mainline u-boot, the variable for the *.dtb file can vary
-#uboot_fdt_variable_name="fdt_file"
+conf_smart_uboot="enable"
 
 #Kernel:
 #https://rcn-ee.net/deb/wheezy-armhf/LATEST-omap-psp
 kernel_subarch="omap-psp"
 kernel_repo="STABLE"
 #kernel_repo="TESTING"
-
+dtb=
 usbnet_mem=
-
-#Kernel: Bootloader Settings:
-conf_zreladdr="0x80008000"
-conf_loadaddr="0x82000000"
-conf_fdtaddr="0x88000000"
-conf_initrdaddr="0x88080000"
 need_am335x_firmware=1
 
-SYSTEM="video"
-
 SERIAL="ttyO0"
 SERIAL_CONSOLE="${SERIAL},115200n8"
-
-di_kms_mode=enable
-
+drm_device_identifier="HDMI-A-1"
 conf_note="Note: During the install use a 5Volt DC power supply as USB does not always provide enough power. If board locks up on boot run [sudo ifconfig usb0 up] on host."
-#
diff --git a/hwpack/am335x-boneblack.conf b/hwpack/am335x-boneblack.conf
index 43957bb..b1d2c77 100644
--- a/hwpack/am335x-boneblack.conf
+++ b/hwpack/am335x-boneblack.conf
@@ -8,57 +8,24 @@ conf_bl_listfile="bootloader-ng"
 
 #Bootloader Partition:
 conf_boot_fstype="fat"
-
 bootloader_location="fatfs_boot"
 spl_name="MLO"
 boot_name="u-boot.img"
 
 #Bootloader: u-boot features:
-
-#CONFIG_CMD_BOOTZ
-#bootz & zImage
-conf_uboot_CONFIG_CMD_BOOTZ=1
-
-#CONFIG_SUPPORT_RAW_INITRD
-#allows booting un-mkimage wrapped initrds
-conf_uboot_CONFIG_SUPPORT_RAW_INITRD=1
-
-#CONFIG_CMD_FS_GENERIC
-#allows using "load" over "fatload"/"ext2load"
-conf_uboot_CONFIG_CMD_FS_GENERIC=1
-
-#uenvcmd avaiable?
-conf_uboot_use_uenvcmd=1
-#conf_uboot_no_uenvcmd="loaduimage"
-
-#can the bootloader auto detect the device: (*.dtb)?
-uboot_fdt_auto_detection=1
-
-#with mainline u-boot, the variable for the *.dtb file can vary
-#uboot_fdt_variable_name="fdt_file"
+conf_smart_uboot="enable"
 
 #Kernel:
 #https://rcn-ee.net/deb/wheezy-armhf/LATEST-omap-psp
 kernel_subarch="omap-psp"
 kernel_repo="STABLE"
 #kernel_repo="TESTING"
-
+dtb=
 usbnet_mem=
-
-#Kernel: Bootloader Settings:
-conf_zreladdr="0x80008000"
-conf_loadaddr="0x82000000"
-conf_fdtaddr="0x88000000"
-conf_initrdaddr="0x88080000"
 need_am335x_firmware=1
 
-SYSTEM="video"
-
 SERIAL="ttyO0"
 SERIAL_CONSOLE="${SERIAL},115200n8"
-
-conf_optargs="capemgr.disable_partno=BB-BONE-EMMC-2G"
-di_kms_mode=enable
-
+drm_device_identifier="HDMI-A-1"
+cmdline="capemgr.disable_partno=BB-BONE-EMMC-2G"
 conf_note="Note: During the install use a 5Volt DC power supply as USB does not always provide enough power."
-#